Olympia GS506 User Manual

Version:B

- 1 -

Smoke

Smoke Alarm

Alarm

Alarm User

User

User Manual

Manual

Model

Model number:

number:

number: GS50

GS50

GS506

6 Ref

Ref

Ref：ST506

ST506

Thank you for purchasing our smoke alarm. Please take a

few minutes to read the user

’

s manual thoroughly and

familiarize yourself and your family with its operation. And

save it for future reference.

Product

Product Specifications:

Specifications:

POWER

OWER

: DC9V(Carbon-Zink Type:GOLITE #G6F22,

1604D)

OPERATION

OPERATION CURRENT

CURRENT

:<10uA (standby), <30mA (alarm)

ALARM

LARM

LARM VOLUME

VOLUME

: >85dB(A) at 3 meters.

ALARM

ALARM S

SENSITIVITY

ENSITIVITY

: 0.10-0.19dB/m.

Description:

The unit is a photoelectric 9V DC smoke alarm. It is operated

by 9v battery (6LR61 or 6F22), battery life 1 year minimum.

With the photoelectric technology, it is more sensitive to

detecting slow smolder fires which general thick, black

smoke, little heat and may smolder for hours before bursting

into flames. The smoke alarm do not contain the radioactive

material which is harmless to the environment.

The smoke alarm should be installed in every room (except

the bathroom), and every other area of the home, making sure

the people in the home will be able to hear and respond to the

alarm sound. For minimum protection you should fit an

alarm in the hallway between the living areas and sleeping

areas. Place the unit near to the living areas as possible and

ensure the alarm is audible when the bedrooms are occupied.

Typical single storey dwelling with recommended:

Install a smoke alarm on the ceiling or wall inside each

bedroom and in the hallway outside each separate sleeping

area. If a bedroom area hallway is more than 30 feet long,

install a sm

oke alarm at each end. If there is a basement:

install a smoke alarm on the basement ceiling at the bottom

of the stairwell.

Typical multi-storey dwelling with recommended protection.

Install a smoke alarm on the ceiling of wall inside each

bedroom and in the hallway outside each separate sleeping

area. If a bedroom area hallway is more than 30 feet long,

install a smoke alarm at each end install a smoke alarm at the

top of a first – to- second floor stairwell.

Important

Important Safety

Safety

Safety Information:

Information:

1: The test button accurately tests smoke alarm functions. Do

not use any other test method. Test smoke alarm weekly to

ensure proper operation.

2: Do not remove or disconnect battery. This will take out

your protection. Open windows or fan the air around

smoke alarm for silence it.

3: This smoke alarm should be installed only by a licensed,

qualified electrician. Observe and follow all local and

national electrical and building codes for installation.

4: This smoke alarm is designed to be used inside a single

family only. In multifam

ily buildings, each individual

living unit should have its own smoke alarms. Do not

install in non-residential buildings. And this smoke alarm

is not a substitute for a complete alarm system.

5: Install a smoke alarm in every room and on every level of

the home. Smoke may not reach the smoke alarm for

many reasons. For example, if a fire starts in a remote

part of the home, on another level, in a chimney, wall,

roof, or on the other side of a closed door, smoke may not

reach the smoke alarm in time to alert household

members.

smoke alarm will not promptly detect a fire

except in the area or room in which it is installed.

6: Smoke alarm may not alert every household member every

time. The alarm horn is loud in order to alert individuals

to a potential danger. However, there may be some

circumstances where a household member may not hear

the alarm (i.e. outdoor or indoor noise, sound sleepers,

drug or alcohol usage, the hard of hearing, etc.). If you

suspect that this smoke alarm may not alert a household

member, install and maintain specialty smoke

alarms.

Household member must hear the alarm

’

s warning sound

and quickly respond to it to reduce the risk of damage,

injury, or death that may result from fire, If a household

member is hard of hearing, install special smoke alarms

with lights or vibrating devices to alert occupants.

7: Smoke alarms can only sound their alarms when they

detect smoke or detect combustion particles in the air.

They do not sense heat, flame, or gas. This smoke alarm is

designed to give audible warning of a developing fire.

EN14604:2005

Version: B

- 2 -

However, many fires are fast - burning, explosive, or

intentional, and others are caused by carelessness or safety

hazards. In this circs, Smoke may not remake the unit

alarm QUICKLY

QUICKLY

QUICKLY ENOUGH

ENOUGH

ENOUGH to ensure safe escape.

8 : Smoke alarms have limitations. This smoke alarm is not

foolproof and is not warranted to protect lives or property

from fire. Smoke alarms are not a substitute for insurance.

Homeowners and renters should insure their lives and

property. In addition, it is possible for the smoke alarm to

fail at any time. For this reason, you must test the smoke

alarm weekly and replace unit every 10 years.

Battery

Battery Connections:

Connections:

Diagram 1

Battery

Battery Specification:

Specification:

Rating voltage: DC 9V ( Alkaline or Carbon Zinc battery )

Package: 6F22 for carbon zinc battery or 6LR61 for alkaline

Replace

Replace Battery:

Battery:

1: Turn the alarm body counterclockwise and take out the

alarm body from the bracket (see Diagram 5) .

2: Take out the old battery, c onnect the new battery to power

connector , according to Diagram 1.

3: Fix the battery into battery box , fit alarm body on bracket

and turn the alarm body clockwise (see Diagram 2).

Diagram 2

4: Test smoke alarm using test button. The sound pattern is 3

short beeps -pause 1.5 seconds, repeat it. I f there’s no

sound output, it means that the smoke alarm is faulty or the

installing operation is wrong, and you should gain the

correctly method of disposal through reading “ TROUBLE

SHOOTING ” .

Do Not

Not

Not Install

Install

Install Smoke

Smoke

Smoke Alarms

Alarms

Alarms in

the

the Following

Following

Following Places

Places

Places :

1 : Near appliances or areas where normal combustion

Regularly oc curs (kitchens, near furnaces, hot water

heaters). Use specialized smoke alarm with unwanted

alarm control for this areas.

2 : In areas with high humidity, like bathrooms or areas near

dishwashers or washing machines. Install al least 10feet

away from these areas.

3 : Near air returns or heating and cooling supply vents.

Install at least 3 feet away from these areas. The air could

blow smoke away from the detector, interrupting its

alarm.

4 : In rooms where temperatures may fall below 40 ℉ or rise

above 100 ℉ .

5 : In extremely dusty, dirty, or insect – infested areas

influence particles interfere with smoke alarm operation.

Testing

Testing the

the

the Smoke

Smoke

Smoke Alarm:

Alarm:

Test each smoke alarm to be sure it is installed correctly and

operating properly.

1: Do not use an open flame to test th e alarm.

You

may ignite

and damage the alarm or your home.

2: Test the alarms weekly and upon return from vacation or

when no one has been at home for several days.

3: Stand at an arm’s length from the unit when testing.

Test all smoke alarms weekly by doing the following step .

4: Firmly press the test button for at least 5 seconds. The

alarm will sound 3 short beeps – 1.5 second s pause , then

repeat it until release the button . The alarm may sound for

up to a few seconds after releasing the test button.

DANGER:

DANGER: If the alarm sounds , and it is not being tested, it

means the unit is sensing smoke, THE

THE

THE SOUND

SOUND

SOUND OF

OF THE

THE

ALARM

ALARM REQUIRES

REQUIRES

REQUIRES YOUR

YOUR

YOUR IMMEDIATE

IMMEDIATE

IMMEDIATE ATTENTION

ATTENTION

ATTENTION AND

AND

ACTION.

Maintenance

Maintenance a

a nd

nd Cleaning:

Cleaning:

In addition to weekly testing, th e alarm requires yearly

battery replacement and periodic cleaning to remove dust,

dirt, and debris.

You

’ d b e tter use good battery to let the alarm work long er ,

+ 2 hidden pages

Olympia GS506 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual