Olicom Broadband Wireless Router User Manual
Broadband Wireless Router (AP)
Quick Started Guide
Introduction
Congratulations on your choosing of this Broadband Wireless Router (AP) with 4-port switch and
access point that extend your existing broadband DSL/Cable connection. The 802.11b access point
allows PC’s with wireless cards connect together, while the high performance 4-port switch that
expand your local network for small office. Also the feature-rich routing functions are seamlessly
integrated to broadband service for existing home or office users. Now users can enjoy various
bandwidth-consuming applications via this Broadband Wireless Router (AP).
Remote
WAN
ADSL /ATU-R
Internet
Connection Figure
1
Packet Contents
Broadband Wireless Router (AP)
•
Power Adapter
•
RJ-45 Ethernet Cable
•
Quick Started Guide and User Manual CD
•
Hardware
Front panel
The following illustration shows the front panel of the Broadband Wireless Router (AP):
1. When link is established, the LED is On.
2. When the device is transferring data, the LED is Blinking.
Rear Panel
The following figure illustrates the rear panel of your Broadband Wireless Router (AP).
PWR: Power Switch. -
-
WAN: This RJ-45 10 Base-T port connects to an Ethernet port of xDSL/ATU-R broadband
device.
-
LAN port L1/L2/L3/L4: 10/100 Base-TX, 4 port auto-sensing & crossover Ethernet switching
hub (LAN interface).
-
12VDC
-
RST: Factory default reset switch.
: 12V power connector.
To restore factory defaults, you do not need to power off the device. Push a small, stiff object into
the RST hole to press down the button. Keep pressing and wait fort 3 seconds (the DIAG LED will
illuminate about 3 seconds and turn off) to release the button. The device will automatically restart.
During restart, do not turn on/off the device and wait for the device to boot up.
2
Loading...