Olevia LT32HVM, LT32HVE User Manual

Download

LCD Multi-Media Display

LT32HVE / LT32HVM Series

MK0-UM00091G000

Table of Contents

Important Information Important Safety Precautions FCC Statement Accessories Installation And Connection Guide

Identifying Front Controls and Rear Inputs

-Descriptions of Input Types

-Connecting the TV's Power Installation

Connecting to an Antenna or Video Equipment with Antenna outlet

-Connecting to a VCR

-Connecting to an Audio Receiver/Home Theater System

Connecting to a DVD Player with A/V or S Video Cables

-Connecting to a DVD Player with Component Cables

-Connecting to a Satellite Receiver or Cable Box with A/V Cables

Connecting to a Satellite Receiver or Cable Box With Component Connectors

-Connecting to a PC with VGA, and a DVD Player with DVI/HDCP Cables

-Other Connections

Remote Control Guide

-Regular Buttons

-Hotkeys Tutorial

Adjusting the On Screen Display (OSD)

Introduction To Operate in the OSD VIDEO Adjusting TV Picture Settings

- Adjusting Picture Quality

- Video Settings

- To Adjust Settings

- Auto Setting : Return to Default Factory Settings

AUDIO Adjusting Sound Quality

- OSD Audio Settings : Equalizer 1

- OSD Audio Settings : Equalizer 2

- MTS System for Stereo TV

MISCELLANEOUS Adjusting Personal TV Settings

- Description of Settings

- Setting the Channels

- Personal Channel Preferences : Favorites

- Personal Channel Preferences : Channel Skip/Lock

- Personal Channel Preferences : Channel Naming

- Setting up the TV Timer

- Watching with Closed Caption

- TV OSD Languages

- Using the Parental Control Feature

- Parental Control

- Activating the Parental Control Feature

- To Block Unrated Channels

- Setting up Parental Control Password

- Factory Default Option

SCREEN Adjusting Screen Modes

- Changing the Screen Mode

- Picture in Picture (PIP)

- PIP Mode

- Split Screen

- Split Screen Mode

Specifications Timing Mode for VGA and DVI Pixels Policy Glossary

1 2 5 6

8 10 11 12 13 14 15 16 17 18 19 20 21

22 23

25 25 26 26 26 29 29 30 31 31 32 33 33 34 34 35 36 37 38 39 39 40 40 42 42 44 45 45 46 48 49 50 51 53 55 56

Important information

Caution

Risk of electronic shock

Do not open

To reduce the risk of electronic shock, do not remove cover (or back).

Refer service to qualified Repair Technician or Repair Center.

No user-serviceable parts inside.

Read the following context indicated by the following symbol to the left. It indicates important literature in operating the product.

Read the following context indicated by the following symbol to the left. It indicates a potential high voltage hazard that may compromise your safety.

Caution

Take caution when moving the product on a cart. Quick stops, excessive force, and uneven surfaces may cause the display unit and cart combination to overturn.

Caution

To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Caution

This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. Prevent electromagnetic interference from electrical appliances such as radios and televisions. Please use shielded cables and connectors for connections.

Warning

FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment.

Important safety precautions

Cleaning

Remember to unplug the AC cord from the AC outlet before cleaning the display unit. And do not use liquid cleaners or aerosol cleaners to clean the display.

Stand

Do not place the display unit on an unstable place. The TV may fall resulting in serious personal injuries to nearby people as well as damage to the display unit.

Ventilation

Do not cover or block these vents and openings located on the top and back of the display. Inadequate ventilation may cause overheating and shorten the lifespan of the display. Do not place in an enclosed area such as a built-in shelf, unless proper ventilation is provided or the manufacturer's instructions are followed. Keep the distance of 10cm minimum between the display unit and wall. Never install the display unit as indicated in the picture below.

Air circulation is blocked

Air circulation is not blocked

10cm

Important safety precautions

Never insert objects or spill liquid into the display unit

Never insert any object into the display unit through openings or spill liquid on the display unit. High voltage flows in the display unit, and inserting an object can cause electric shock and/or short internal parts.

Keep away from water and moisture

Do not place the display in areas where moisture is present or where the unit may get wet such as bathrooms, kitchen, pool area or in a wet basement.

Keep away from heat sources

Keep the display unit away from heat sources such as radiators, heaters, stoves and other heat-generating products.

The liquid crystal panel used in this product is made of glass

Do not hit the panel. Be careful to prevent from getting hurt by broken glass pieces in case the panel breaks.

Precautions when transporting the display

Carrying the display requires two or more people.

Attachments

Do not use attachments not recommended by the manufacturer. Use of inadequate attachments may result in accidents to nearby poeple or to the unit.

Power source

This product must operate on a power source specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company. For units designed to operate on batteries or another power source, refer to the operating instructions.

AC cord protection

The AC cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product.

Follow operating instructions

All operating instructions must be followed.

Servicing

Do not attempt to service the display unit yourself. Removing covers expose you to high voltage and other dangerous conditions. Request a qualified service technician to perform the service.

Wall mounting

Be sure to install the display unit according to the method recommended by the manufacturer. Use only the mounting hardware recommended by the manufacturer.

Overloading

Do not overload AC outlets or extension cords. It may result in electric shock or start a fire.

Replacement parts

In case the display unit needs replacement parts, make sure that the service technician uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

Safety checks

Upon completion of service or maintenance, request the service technician to perform safety checks to ensure that the display unit is in proper operating condition.

Repair

When the display unit displays an abnormal condition, any noticeable abnormality in the display unit indicates that the display unit needs servicing. If any of the following conditions occurs, unplug the AC cord from the AC outlet, and request a qualified service person to perform repairs.

Important safety precautions

1.A liquid was spilled on the display unit or objects have fallen into the display unit.

2.The display unit has been exposed to rain or water.

3.The display unit has been dropped or damaged.

Environment

The display unit only operates within the temperature 0C to 40C.O peration outside of the recommended may cause damage to your product.

FCC Statement

FCC notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1.Reorient or relocate the receiving antenna.

2.Increase the separation between the equipment and receiver.

3.Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

4.Consult the dealer or an experienced radio/TV technician for help.

Modifications not expressly approved by the manufacturer could void the user's authority to operated the equipment under FCC rules. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.This device may not cause harmful interference.

2.This device must accept any interference received, including

interference that may cause undesired operation.

For Canadian model

This Class B digital apparatus complies with Canadian ICES-003.

Approval

Accessories

Supplied accessories

Remote control & batteries (AAA x 2)

VGA cable (D-Sub 15 male) x 1

User manual booklet x 1

LCD Multi-Media Display

LT32HVE / LT32HVM Series

QSG x 1

LCD Multi-Media Display

Quick Start Guide

LT32HVE / LT32HVM Series

Power cord x 1

Accessories

Optional accessories

AV cable with RCA connector

S-video cable

DVI cable

Audio cable with RCA connector

Component cable with RCA connector

Wall mount set

Model# WM-20D

Audio cable with stereo mini jack

Use the proper cable for the device.

( Stereo mini jack cable )

( Stereo mini jack to RCA cable )

TV Installation and Connection Guide

Source VOL- VOL+ CH CH Menu Power

Identifying Front and Rear Panels

Front Panel

POWER

CH / CH

VOL+/VOL-

SOURCE

IR SENSOR

Turns display on/off

Displays the On Screen Display(OSD) menu. In OSD menu, press it to return to pre-phase

Adjusts Channel. In the OSD menu, both keys are used to navigate within menu.

Adjusts volume. In OSD menu, both key are used to navigate within menu. Vol+ is used to select the highlighted option.

Press to switch the input sources

Contains Infra-red light for digital data transmission by the remote control. Please point remote control at IR Sensor for function.

IR Pad

TV Installation and Connection Guide

Identifying Front and Rear Connectors

Rear Panel

Audio

Component-1 Component-2

VIDEO-1 VIDEO-2

DVI / HDCP

VGA

Service Port

S-Video

ANT

Output

Ear Phone

S-Video

AC IN power cord connects here.

DVI/HDCP and VGA Port This display

includes a DVI input that receives analog or digital video signals through the interface for the display of high quality digital video signals. The DVI port is HDCP (High Bandwidth Digital Content Protection) compliant and is fully compatible with video equipment that features the HDCP function. The VGA input can be used for analog RGB signals from a HD Receiver or personal computer. Resolutions supported are VGA, SVGA, XGA and WXGA. DVI and VGA share Audio L/R inputs.

Service Port is reserved for manufacturer use. Incorrect use may damage the Display.

Antenna (ANT) Antenna receives signals from VHF/ UHF antennas or a cable system.

Audio Out The Audio Output sends the TV's connected audio signals to an A/V receiver or other equipment. Display features a R/L stereo output.

Component 1, 2 These inputs can be used for the connection of A/V equipment with component video outputs, such as a DVD player, Digital Satellite Receiver, or compatible Video Game System.

Video 1,2 These inputs can be used for the connection of a VCR, Super VHS (S-VHS) VCR, DVD player, or other video devices to the TV. There is a Video and an S-Video input for Video1 and video 2. When both inputs are used simultaneously on Video 1, only the S-Video input will be recognized. Same behavior for Video 2. The display will automatically detect the input being used.

NOTE: The S-Video input has a better quality of picture than a composite Video signal.

TV Installation and Connection Guide

Descriptions of Connector Types

You may find it necessary to use some of the following connector types during setup.

75-ohm coaxial cable Used for TV cable connection .

S-Video Cable High quality video cable for enhanced picture quality.

Audio/Video Cable

Video Yellow

Audio (Left) White

Audio (Right) Red

Some DVD players are equipped with the following three video connectors:

Y- Green

Pb/Cb - Blue

Pr/Cr - Red

TV Installation and Connection Guide

Connecting the Power Cord

Complete other connections prior to connecting the power cord:

1.Connect the power cord to the AC IN connector of the TV

2.Connect the other end of the power cord to the wall outlet.

TV Installation and Connection Guide

Installation

In the following pages, you will find directions on how to install your tv and choice of video equipment.

Connecting to an Antenna or Video Equipment with Antenna outlet

Connecting to a VCR

Connecting to an Audio Receiver/Home Theater System

Connecting to a DVD Player with A/V or S Video Cables

Connecting to a DVD Player with Component Cables

Connecting to a Satellite Receiver or Cable Box with A/V Cables

Connecting to a Satellite Receiver or Cable Box With Component Connectors

Connecting to a PC with VGA, and a DVD Player with DVI/HDCP Cables

Other Connections

ANT

Ear Phone

Audio

Output

Component-1 Component-2

TV Installation and Connection Guide

ANT

Ear Phone

Audio

Output

Component-1 Component-2

Connecting to an Antenna or Video Equipment with Antenna outlet

Disconnect all power sources before making any connection.

1.Connect a 75-ohm coaxial cable onto the ANT input on the back of the TV's right side panel.

Rear of TV

75-ohm coaxial cable

If connecting to Video Equipment with Antenna outlet

1.Using a 75-ohm coaxial cable (or choice of Antenna Cable), connect

the cable box's OUT jack to the TV's ANT jack (RF Terminal).

Rear of TV

OUT

jack

Video Equipment with Antenna In/Out Socket

75-ohm coaxial cable75-ohm coaxial cable

ANT

Ear Phone

S-Video

VIDEO-1 VIDEO-2

Audio

Output

Component-1 Component-2

TV Installation and Connection Guide

Connecting to a VCR

Disconnect all power sources before making any connections.

Use this hookup if you subscribe to a cable TV system that does not require a cable box.

1.Using A/V cable and S-Video cables, connect the VCR's Audio and S Video OUT jacks to the TV's Audio and S-Video In jacks.

VCR

A/V cable with RCA connector

S Video cable

Connecting both Video IN or S-Video IN Note: When you connect video equipment to both the same Video and

S-Video input jacks, display will automatically select S-Video first. To view Video signal, please disconnect the S-Video jack or turn off the S-Video signal on the video equipment.

S-Video is strongly recommended for use if your VCR or video equipment has it. S-Video input has a better quality of picture than a composite Video signal.

Rear of TV

Red

White

Yellow

TV Installation and Connection Guide

ANT

Ear Phone

Audio

Output

Component-1 Component-2

Connecting to an Audio Receiver

/ Home Theater System

Disconnect all power sources before making any connections.

1.Using an audio cable, connect the TV's audio OUT jack to the audio receiver's audio IN or AUX IN jacks.

Audio Receiver

Audio cable

Red

White

Note: When connecting an Audio output signal, an external Audio amplifier is necessary to amplify the signal for external speakers.

Note: If the audio out is hooked up to a home theatre sound system, please disable the audio in the OSD by selecing off in audio section . Volume adjustment must be made on the home theatre receiver. By not disabling the TV's speaker it could damage the speakers or TV itself.

TV Installation and Connection Guide

ANT

Ear Phone

S-Video

VIDEO-1 VIDEO-2

Audio

Output

Component-1 Component-2

Connecting to a DVD Player with A/V or S Video Cables

Disconnect all power sources before making any connections.

Use this hookup if your DVD player does not have component (Y, Pb, Pr) jacks. Note: If your DVD player has component video output connectors, for best picture quality, use the connection described for Connecting to a

DVD Player With Component Connectors.(See page.17)

1.Using an A/V cable, connect the DVD player's Audio OUT jacks to the TV's Audio IN jacks.

2.Using an SVideo Cable, connect the DVD player's S Video OUT jack to the TV's S Video IN jack.

DVD player

A/V cable with RCA connector

S Video cable

Note: When you connect video equipment to both the same Video and S-Video input jacks, the display will automatically select S-Video first. To view Video signal, please disconnect the S-Video jack or turn off the Video signal on the video equipment.

S-Video is strongly recommended for use if your VCR or video equipment has the option. S-Video input has better quality of picture than a composite Video signal.

Rear of TV

Red

White

Yellow

TV Installation and Connection Guide

ANT

Ear Phone

VIDEO-1 VIDEO-2

Audio

Output

Component-1 Component-2

Connecting to a DVD Player With Component Cables

Disconnect all power sources before making any connections.

Use this hookup if your DVD Player has component (Y, Pb, Pr) jacks.

1.Using a component video cable, connect the DVD Player's Y, Pb and Pr jacks to the Y, Pb and Pr jacks on the TV.

Colors on Component Video connectors:

Y: Green Pb (also identified as Cb, CB or B-Y): Blue Pr (also identified as Cr, CR or R-Y): Red

Note: The Y, Pb and Pr jacks on your DVD player are sometimes labeled as Y, Cb and Cr, or B-Y and R-Y. If so, connect the cables to the matching colors.

2.Using an Audio cable, connect the DVD player's Audio OUT jacks to the TV's Audio in jacks.

DVD player

Audio cable

Component cable with RCA connector

Note: The Y, Pb and Pr jacks do not provide audio, so audio cables must be connected to provide sound.

Note: The YPbPr connection provides the best quality of video signal compared to AV (Composite) and S-Video connection.

Rear of TV

Red

White

Red

Blue

Green

TV Installation and Connection Guide

ANT

Ear Phone

S-Video

VIDEO-1 VIDEO-2

Audio

Output

Component-1 Component-2

Connecting to a Satellite Receiver or Cable Box with A/V Connectors

Disconnect all power sources before making any connections.

1.Using Audio and S Video cables, connect the satellite receiver's Audio

and S Video OUT jacks to the TV Audio and S Video IN jacks.

2.Connect a 75-ohm coaxial cable from your cable or antenna to the

Satellite Receiver's or Cable Box's Ant (Antenna) jack.

75-ohm coaxial cable

Satellite Receiver or Cable Box

Red

A/V cable with RCA connector

White

Yellow

S VIDEO cable

Note: When you connect video equipment to both the same Video and S Video input jacks, display will automatically select S Video first. To view S Video signal, please disconnect Video jack or turn off the Video signal on the video equipment.

S-Video is strongly recommended for use if your VCR or video equipment has it because S-Video input has better quality of picture than a composite Video signal.

Rear of TV

TV Installation and Connection Guide

ANT

Ear Phone

VIDEO-1 VIDEO-2

Audio

Output

Component-1 Component-2

Connecting to a Satellite Receiver or Cable Box With Component Connectors

Disconnect all power sources before making any connections.

Use this hookup if your Satellite Receiver or Cable Box has component (Y, Pb, Pr) jacks.

1.Using a component video cable, connect the Satellite Receiver or Cable Boxes' Y, Pb and Pr jacks to the Y, Pb and Pr jacks on the TV.

Colors on Component Video connectors:

Y: Green Pb (also identified as Cb, CB or B-Y): Blue Pr (also identified as Cr, CR or R-Y): Red

Note: The Y, Pb and Pr jacks on your Satellite Receiver or Cable Box are sometimes labelled as Y, Cb and Cr, or B-Y and R-Y. If so, connect the cables to the matching colors.

2.Using an Audio cable, connect the Satellite Receiver or Cable Boxes' Audio OUT jacks to the TV's Audio in jacks.

Satellite Receiver or Cable Box

Audio cable

White

Component cable with RCA connector

Green

Note: The Y, Pb and Pr jacks do not provide audio, so audio cables must be connected to provide sound.

Note: The YPbPr connection provides the best quality of video signal compared to AV (composite) and S-Video connection.

Rear of TV

Red

Blue

TV Installation and Connection Guide

Connecting to a PC with VGA Connector

Disconnect all power sources before making any connections.

1.Using a D-Sub 15 pin cable, connect the VGA output terminal of the PC to the TV's VGA signal input terminal.

2.You may need to use a Stereo mini jack to RCA L/R connectors to receive audio.

Connecting to a DVD Player or HDReceiver with a DVI/HDCP Cable

Disconnect all power sources before making any connections.

1.Using a DVI cable, connect the DVD's DVI output terminal to the TV's DVI-HDCP input terminal.

2.Using an Audio cable, connect the DVD's Audio OUT jacks to the TV's Audio IN jacks.

Rear of TV

D-sub 15 pin cable

Rear of TV

DVI / HDCP

VGA

Red

VGA

Red White

Service Port

White

Note: VGA and DVI/HDCP Connectors share the same audio input

Note: HDCP is a copy protected digital connection that receives analog or digital video signals from equipment with DVI ouput that features the HDCP function. DVI allows the transfer of digital uncompressed data to the TV. DVI technology is better than Component, S Video or AV (composite) connections.

Note: DVI signal is purely digital and provides a crystal clear technology better than component, S-Video or Video connections. It is strongly recommended to use this connection if you have this function on your equipment.

DVI cable

Audio cable with stereo mini jack

ANT

Ear Phone

Audio

Output

Component-1 Component-2

TV Installation and Connection Guide

ANT

Ear Phone

Audio

Output

Component-1 Component-2

Other Connections

Disconnect all power sources before making any connections.

See setup instructions for: Connecting to an Audio Receiver on page 15.

Speaker Outputs

Rear of TV

Red

White

Headphone Set

Right Side of TV

Note: When headphone is plugged in the speaker will turn into mute mode.

Remote Control Guide

Remote Function Keys & Description

Regular Buttons

POWER Press to turn display on/off.

CH + / CH - Press to adjust channel up and

channel down.

NUMBER BUTTONS Press the number buttons to select channels on the display.

VOL+/ VOL- Press to adjust the volume.

RETURN (Channel Return) Press to return the

to previous-channel.

MTS Press to select from SAP, Mono or Stereo mode

buttons (Direction Buttons) Press to move highlighted selection through menus or submenus.

SOURCE Press to show the source input from TV 1, AV 1, AV 2, SV 1, SV 2, YPbPr 1, YPbPr 2, DVI and VGA.

ENTER Press to enter the channel number, highlighted menu or submenu item.

MUTE Press to mute the sound.

MENU Press to activate or close the On Screen Display menu. In OSD Menu, acts as a cancel button while navigating through the OSD.

DISPLA Y Press to display the information of current channel number.

Hotkeys Press to directly access certain

Shortcut TV functions..

Remote Control Guide

Hot Keys Tutorial

The remote control contains 15 additional "Hotkeys" that represent direct access to a certain function on your TV. Hotkeys enable you to directly change the setting to your preference without having to navigate through the OSD (On Screen Display) Menu.

How to use your Hot Keys

HOT KEY FUNCTION

TV / VIDEO Press to select a video signal from different sources (TV 1

, AV 1, AV 2, SV 1, SV 2, YPbPr 1, YPbPr 2, DVI and VGA ) .

AUTO ( Auto adjustment ) Under VGA mode, the screen position could be automatically adjusted by pressing "Auto" button, when the screen image is not centered.

VIEW Press to select and program PIP, Split Screen or viewing options.

SWAP Press to select TV channels between main and sub screen. (This

function is only in the PIP and Split Screen modes.)

EQ1 This function will provide an environmental effect to the audio for an added live experience.

FAVORITE Press to select favorite channels. Can be preset in OSD Menu.

C.C. Press to call up the Close Caption (CC) and Caption Service (CS) list. You can pre-select one to see Closed Caption.

EQ2 This function will provide a preset equalized effect to the audio for

added audio definition.

Note: EQ1 and EQ2 selections can be used simultaneously to suite your preference.

Battery Installation

1.Push the tab and pull it out as illustrated below.

2.Insert two size AAA batteries (supplied) by matching the (+) and (-) on the batteries to the diagram inside the remote control's battery department.

3.Replace the cover back and make sure the cover "snaps" into the remote control.

Remote Control Guide

Note:

1.The display unit comes with two new AAA batteries as accessories. However, due to uncontrollable causes, the electricity of the accessorized batteries may be partially or completely drained. We do not warrant the quality of the batteries in any case since many factors are considered. If replacement is needed, please purchase two AAA batteries.

2.Handle remote with care. Avoid dropping it, placing in direct sunlight, near a heater, high areas of humidity or getting it wet. If the remote gets wet, please wipe it dry immediately. In the event of the remote not working properly or is inoperational, a replacement of remote control may be required.

3.If you do not use the remote control for a long period of time, please remove the batteries and store in a cool place to preserve battery life.

4.Do not mix new and used or with different types of batteries for operation.

Adjusting On Screen Displays (OSD)

Introduction

After you have finished connecting your TV, you are now ready to choose and personalize your TV settings in the OSD (On Screen Display) menu.

There are four main sections in the OSD Menu:

Video Audio

Miscellaneous

Screen

To Operate in the OSD

1. Press "Menu" button to enter OSD menu mode.

2. In Main OSD Menu, use the and keys to select and enter each

main OSD Section: Video; Audio; Miscellaneous; Screen. Note: The OSD Section appears at the bottom left corner of the OSD Screen at all times.

3. In Each OSD Section, press the and to select the function, and

the button to make an adjustment or selection.

4. To adjust the value bar, use the keys and

5. After choosing your setting, press the to go back into Main OSD

Section. To exit, press to go back to Main OSD Menu.

6. To exit the OSD menu, press "Menu" until you exit the OSD menu,

or without action for 12 seconds of inactivity. This is also adjustable in the OSD.

OSD-Video

VIDEO Adjusting TV Picture Settings

Advance Video Quality

In this Setup Index, you can adjust the video and picture settings to suit your personal preferences.

Adjusting On Screen Displays (OSD)

Video Settings

Item

Brightness Contrast Saturation Hue Sharpness Color temp

Red Gain Green Gain Blue Gain

Backlight Auto Setting Advance Picture Adjust

Adjustment

0~100 0~100 0~100 0~100 0~100 Cool / Middle / Warm / User

0~100 0~100 0~100

Bright / Middle / Dark Enter Enter

Function

Adjusts picture brightness contrast Adjusts picture color contrast Adjusts the color intensity Adjusts the tint or shade of picture Adjusts the picture sharpness or softness Adjusts image color intensity.

Cool: More blue-tinted colors Middle: Standard color temperature Warm: More red-tinted colors

User: Allows User to adjust RGB Gain Adjusts the color control with red tones Adjusts the color controls with green tones Adjusts the color controls with green tones

Adjusts the darkness or lightness of the screen Adjusts OSD Settings back to factory default Adjusts additional specific picture settings ( DNR, Black Level Extender, White Peak Limitator, Flesh Tone, Adaptive Luma Control )

Adjusting On Screen Displays (OSD)

Advance Picture Adjust

To further adjust specific picture settings, enter this function by pressing the button.

Advance Picture Adjust

Definition of Terms

Item

DNR

Black Level Extender

White Peak Limitator

Flesh Tone

Adaptive Luma Control

Status

Off/Low/Middle/Strong

On/Off

Description and Function

DNR-Dynamic Noise Reduction. Reduces high frequency noise dynamically. Off- Dynamic Noise Reduction is disabled. Low/Middle/Strong---Set the DNR in low/medium/strong degree. Black Level Extender -Extends "grays" to black so a more accurate picture is produced with a wider contrast scale. On-The Black Level Extender is enabled. Off-The Black Level Extender is disabled. White Peak Limitator-Limit the signal amplitude varying degree resulted in brightness over saturation. On-The White Peak Limitator is enabled. Off-The White Peak Limitator is disabled. Most LCD TV's video processing solutions have a red push to the their color matrix. With the FleshTone Control option, it helps to tone down these strong reds and produce more naturalistic color tones. On-Flesh tone adjustment is enabled. Off-Flesh tone adjustment is disabled. Control the luminance adaptively. On-The Adaptive Luma control feature is enabled. Off-The Adaptive Luma control feature is disabled.

OSD-Video

Adjusting On Screen Displays (OSD)

To Adjust Settings:

Use the and remote buttons to adjust each Video picture setting, as seen below:

Brightness

Saturation

Hue

To exit, press the Button

Enter

To Reset Factory Settings

If, at any time, you wish to go back to original factory setting, you may do so by choosing the Default setting in the OSD Picture and Audio Sections.

Selecting "Default," will reset all OSD settings to the original manufacture settings. The only items which will remain unaffected, are:

Clock

Auto Scan Channels Edited Channels Parental Control Password

Adjusting On Screen Displays (OSD)

Audio Adjusting Sound Quality

Audio setting

Definition of Terms

Item

Treble Bass Balance Surround

Equalizer 1

Equalizer 2

MTS

Speakers

Adjustment

-50~50

-20~20

On / Off

Off, Concert, Living Room, Hall, Arena, Church Off, Rock, Pop, Live, Classic, Soft Mono, Stereo, SAP

On / Off

Function

Adjusts higher pitched sounds Adjusts lower pitched sounds Adjusts volume balance in Left and Right Creates a panoramic stereo audio image by producing deep and rich bass tones and clear treble tones. This enables you to enjoy powerful sound effects like those in a movie theatre Adjusts the sound as occurred in an enclosed space of varying spaces Adjusts the volume of different bands (ranges of frequencies (HZ)) to control the overall sound Adjusts sound reception of stereo, bilingual and mono programs under the TV Source. Turns off the speakers of the TV when using a Receiver or Home Theater System.

OSD-Audio

Adjusting On Screen Displays (OSD)

To Adjust Settings:

Use the and remote buttons to adjust each Audio sound quality, as seen below:

Treble

Bass

Balance

Surround Sound is an available option for creating a panoramic stereo

audio image by producing deep and rich bass tones and clear treble tones. This enables you to enjoy powerful sound effects like those in a movie theater.

Speakers

Must turn off speakers of the TV when using a Receiver or Home Theater System.

Adjusting On Screen Displays (OSD)

OSD Audio Settings: Equalizer 1

OSD-Audio

OSD Audio Settings: Equalizer 2

OSD-Audio

Adjusting On Screen Displays (OSD)

MTS System for Stereo TV

You can enjoy stereo, bilingual and mono programs.

Additionally, you can press the hotkey "MTS" until the desired sound in dication appears. Each time you press the button, the sound indication changes as follows:

Mono, Sap, Stereo

Definifion of Terms

Sound Effect

Stereo

SAP

Mono

Description

Select for stereo reception when viewing a program broadcast in stereo Select to automatically switch the TV to Secondary Analog Program when a signal is received. (If no SAP signal is present, the TV remains in Stereo Mode) Select for mono reception. (Use to reduce noise during weak stereo broadcasts)

Adjusting On Screen Displays (OSD)

MISCELLANEOUS Adjusting Personal TV Settings

In this Section, you can adjust additional TV settings to your personal preference, including channel setup, choosing tuner modes, setting up timer, closed caption services, parental controls, and viewing the OSD in your preferred language.

OSD-Miscellaneous

Description of Settings

Item

Channel Setup Channel-Favorite Channel-Skip

Channel-Name Tuner Mode Auto Search

Timer

Closed Caption

Parental

Language

Default

Adjustment

24 favorite channels setting

Air / Cable

Time, Start/Stop Time, Channel, Activate option, Display option C1, C2, C3, C4, T1, T2, T3, T4

MPAA G/PG/PG-13/R/NC-17/X Tv rating TV-Y/ TV-Y7/ TV-Y7-FV NPAA Unrated TV-G/ TV-PG(V,S,L,D)/ TV-14(V,S,L,D) / TV-MA(V,S,L) TV None Rating Password

English / Deutsch / Francese / Italiano

/ Espanol / Portugues and Pycc .

Function

Setting up Channel functions Stores the favorite channels Sets up available channels. Add : To add available channel. Skip : To cancel available channel Stores channel names

Selects to auto scan the available channels of the TV or CATV. Set Alarm with channel preference

Switches different types of caption or cancel caption functions. Adjusts MPAA and TV Ratings under parental control settings and setup password lock.

KNN

Switches the OSD language

Resets OSD setting to default.

OSD-Miscellaneous

Adjusting On Screen Displays (OSD)

Setting the Channels

After you finish connecting your TV, you can run Auto Scan program to setup your channels. The program will scan and preset all receivable channels automatically.

To Cancel Auto Program

Exit auto scan program by pressing "menu" Key.

Note: The Auto Scan is set to scan cable TV channels by default. You cannot receive and set the cable TV channels VHF/ UHF channels at the same time.

Setting Favorites Channels

You can select and store a list of your favorite channel settings. Selected favorite channels are marked with a icon.

You can preset favorite channels on this page. You can also access this function by pressing the " FAVORITE" hotkey on the remote control and select or switch between your favorite channels .

1. Enter "Channel-Favorite" mode.

2. Press "Edit " to enter the channel(s) using the number keys. You can "Delete" channels per line or "Empty" all channels at once.

3. Press "View" to see the selected channel display in real time.

4. Press "Enter" to exit when complete.

Adjusting On Screen Displays (OSD)

Watching favorite channels

To watch you favorite channels after specifying your preferences, just press the Hotkey "FAVORITE" to browse through each favorite channel.

Editing Channels

You can also edit channels to your personal preference. Once you edit a channel, it will be skipped when surfing through TV channels.

OSD-Miscellaneous

To Skip or Lock a Channel

1.Make sure Channel Skip or Channel Lock is highlighted.

2.Enter the channel number you wish to skip or lock, or scroll through channels using the and Arrow.

3.Press "Enter" to make your selection or adjustment. Note: You will see a checkmark next to Skipped Channels, and a small lock icon next to Locked Channels.

4.Press to exit when complete.

To Undo a Skipped or Locked Channel:

1.Make sure Channel Skip or Channel Lock is highlighted.

2.Enter channel number you wish you undo, or scroll through channels using the and Arrow.

3.Press "Enter" to make your selection or adjustment. Note: You will NOT see a checkmark next to Skipped Channels, or a small lock icon next to Locked Channels afterwards.

4. Press to exit when complete.

OSD-Miscellaneous

Adjusting On Screen Displays (OSD)

Personal Channel Preferences: Channel Naming

You can also create personal names for each channel, which will show up in the upper Right hand corner of the TV screen.

To Name a Channel:

1. Enter Channel Name sub-page

2. Enter Channel name using alphabet-numerical keypad as seen below:

3. Press "Okay" to exit keypad when naming is complete.

Once you have named a channel, your preset channel name will show up on the TV screen when flipping through channels, or by pressing the Display Key.

If you named your favorite channel, you will see the heart icon next to the channel name.

Adjusting On Screen Displays (OSD)

Setting up the TV Timer

To setup the time on the TV:

1.Using and keys, enter in HH: MM: SS Enter the time using the number keys found on the remote.

2.press "Enter" when complete.

OSD-Miscellaneous

NOTE: Clock will NOT BE affected when Factory Default settings are reset.Under Activate, "ON" allows the start/stop time to be ongoing whereas, "ONCE" allows it to only function once.

However, when the power cord is not connected to the TV, you will lose all previous time adjustments.

OSD-Miscellaneous

Adjusting On Screen Displays (OSD)

Timer: Start Time / Stop Time

You can set the TV to turn On and/or Off automatically at a predetermined time through the timer function. Use the Start Time to setup the hour and minute preferences. Your TV will automatically turn on at the set time. Use the Stop Time to setup the hour and minute preferences. Your TV will automatically turn off at the set time.

Note: Alarm WILL BE affected when Factory Default settings are reset.

When the power cord is not connected to the TV, you will lose all previous saved adjustments.

Watching with Closed Caption

You can display closed captioning if the broadcaster offers this service.

Close Caption option can be set On/Off from the OSD page. This function also can be accessed by pressing "C.C " hotkey on the remote control.

1. Not all programs offer the Closed Caption option.

2. Closed Caption may not be seen clearly (white blocks, strange characters, etc.) if the signal condition is poor, or if there are technical difficulties with the broadcaster.

3. If no TEXT broadcast is being received while viewing in the [TEXT] mode, the screen may become dark and blank for some programs. Switch Off the Closed Caption mode.

Adjusting On Screen Displays (OSD)

TV OSD Languages

There are nine language formats available for the OSD Menu. You may choose from the following: English, Chinese Traditional, Chinese Simplified, Deutsch, Francese, Italiano, Espanol, Portugues and Pycc .

~ ~

^ ^

KNN

OSD-Miscellaneous

Using the Parental Control Feature

To block programs you feel unsuitable for your children, you need to Set the TV for desired rating systems. The TV Parental Control feature functions by receiving the rating signal from your local broadcasting station or cable service provider.

The TV programs and movies shown on TV are given a rating signal based on the following rating systems.

In U.S.A.: U.S. Television Parental Guidelines to rate television pro grams (U.S. TV Ratings) and Motion Picture Association of America (MPAA) Guidelines to rate movies including those shown on TV (Movie ratings).

In Canada: Canadian English Language ratings to rate television programs in English, and Canadian French Language ratings to rate those in French.

OSD-Miscellaneous

Adjusting On Screen Displays (OSD)

Parental Control

1. This function allows programs to be restricted and controlled by parents based on FCC regulation. It prevents children from watching program contents that may be prohibited by parents.

2. Restriction of programs is based on three Rating Systems: MPAA Rating, TV (Child) Rating and TV (Entire Audience) Rating. The MPAA Rating restricts based on age. TV (Child) rating and TV (Entire Audience) Rating restrict based on age and contents.

3. When you block the lower rating, the higher age-based ratings are blocked automatically.

4. When you enter "Parental control" mode, those messages display for different state.

The Parental Control Main Menu contains four options in the following categories:

1.MPAA Rating

2.TV Rating

3.MPAA Unrated

4.TV Unrating

Adjusting On Screen Displays (OSD)

Activating the Parental Control Feature

Once you enter the highlighted section of Parental Control, you will have to enter your password. The Factory Default password is"9999". Once you enter the Parental Control Menu, you may change the password to your personal preference.

To setup, enter each sub-menu to setup your parental controlled TV channels.

OSD-Miscellaneous

MPAA Rating controls channels and movies that are rated from G, PG-13, R, NC-17, and X.

Adjusting On Screen Displays (OSD)

TV Rating controls channels and movies that have been rated from TV-Y, TV Y-7, TV-G, TV-PG, TV-14, and TV-MA.

To Block Unrated Channels

You may choose "YES" for Block MPAA Unrated and Block TV None Rating. This will lock you from accessing any channels that do not contain MPAA or TV Ratings. To watch unrated channels, re-activate Block MPAA Unrated and Block TV None Rating to "NO".

Adjusting On Screen Displays (OSD)

Setting up Parental Control Password

Enter the password sub-page. Enter the current password. If this is the first time, you do not have to enter a password.

You will have to enter and confirm your password before changing to a new password. Please keep password within 4 numbers.

OSD-Miscellaneous

If you enter the incorrect password, you will see an error page. Please re-enter the new password and confirmation password again.

Note: If you forget the password, press "9999" to lift the Password lock and change to a new preferred password.

OSD-Miscellaneous

Adjusting On Screen Displays (OSD)

Factory Default Option

Reset Factory Settings:

Initiating Factory Default will reset all OSD settings to original manufacture settings. The only items, which will remain unaffected are:

Clock

Auto Scan Channels Edited Channels Parental Control Password

Adjusting On Screen Displays (OSD)

Adjusting Screen Modes

There are two option in the Screen Modes, "aspect & "View." Apect will allow user to select different aspect ratios, whereas, View will all different modes of viewing 1 or 2 sources.

Changing the Screen Mode

You can alter the aspect ratio of a picture by choosing between these four options:

Input

4:3

Input

16:9

Full Screen

Full Screen Enlarges the picture to 16:9 wide mode, by stretching the picture horizontally only.

4:3 Returns the 4:3 picture to its original size. This is considered the "normal" viewing mode.

16:9 Enlarges (zoom-in) the size of a 4:3 picture on screen as geometric ratio, keeping the

original image as much as possible.

Panoramic select to widen the displayed image. (only applies to content larger than 16:9)

4:3

16:9

Panoramic

OSD-Screen

Adjusting On Screen Displays (OSD)

Changing the View Modes

You can select four view types of picture modes that best suits the program you are watching. You can set a different view mode for each video mode for each input and store it manually.

View Modes

PIP

Split Screen

Function

Picture-in-Picture has a Main screen and small screen view

Full Screen split in two Views

Picture in Picture (PIP)

Allows you to view a main screen (Picture 1)and a secondary small screen (Picture 2). Press 'source' button to switch from P1 to P2 and vice versa.

You may also choose the settings of P1 and P2 as well as the position of P2 on screen.

OSD View

TV View

Adjusting On Screen Displays (OSD)

OSD-Screen

Adjusting On Screen Displays (OSD)

PIP mode

You may adjust setting for each Picture source. Pic 1 allows for a TV, AV1, AV2 and DVI sources while Pic 2 supports all other input sources.

Item

PIP Position

PIP-Pic1 PIP-Pic2

Adjustment

Upper Left / Upper Right / Lower Left / Lower Right TV1,AV1, AV2, DVI AV1, AV2, S-Video1, S-Video2, YpbPr1, YpbPr2, DVI, VGA

Function

Changes the position of Picture 2

Switches the source of Picture 1 Switches the source of Picture 2

Note: Pic 1 allows for a TV, AV1, AV2 and DVI. Pic 2 allows for all sources except TV or if you are already using one of the other sources from Pic 1. When you use the swap function, the signals from the main window and the PIP window will swap positions no matter what sources you specified on either window.

Adjusting On Screen Displays (OSD)

Split Screen

Allows you to view two separate screens simultaneously (Picture 1 and Picture 2). Press 'source' button to switch from P1 to P2 and vice versa.

OSD View

OSD-Screen

TV View

Pic1

Pic2

Adjusting On Screen Displays (OSD)

Split Screen mode

You may adjust setting for each Picture source. Only Pic1 supports a TV input source, while Pic2 supports all other TV input sources.

Item

Pic1 Pic2

Adjustment

TV1, AV1, AV2, DVI AV1, AV2, S-Video1, S-Video2, YpbPr1, YpbPr2, DVI, VGA

Function

Switches the source of Picture 1 Switches the source of Picture 2

Specifications

Panel Size

Aspect Ratio

Pixels

Dynamic Contrast Ratio

H/V(View Angle)

Gray to Gray Response Time

Video/Graphic Processing

PC Compatible Frequency

Video Compatibility

DTV & HDTV Compatibility

Aspect Ratio Adjustment

3D Comb Filter

3 2 / 2 : 2 Pu ll Down

Digital Noise Reduction

Adjustable Color Temperature

De-interlacer

VGA Auto Frequency Correction

TV Auto Frequency Detection

Audio Processing

Auto Sound Level Control

Output Watt

Sound Effect

Input Terminals

TV Tuner

Video Input(Rear Side)

Graphic Input(Rear)

Service Port(Rear)

LT32HVE

32"

16:9

1366 X 768

1600:1

178 (H) / 178 (V)

8 ms

30~85 KHz(H) / 50~80Hz(V) Max. 1360x768 @60Hz

NTSC

480i, 480p, 720p, 1080i

Full screen, 4:3, 16:9, Panoramic

ON/OFF, Low, Middle, Strong

Cool, Middle, Warm, User

15W + 15W

MTS (Mono / Stereo / SAP)

EQ1 and EQ2

NTSC VHF/UHF tuner x 1

Input 1:AV x1, S-Video x1, RL x1 Input 2:AV x1, S-Video x1, RL x1 Input 3:Y, Pb/Cr, Pr/Cr x1, RLx1 Input 4:Y, Pb/Cb, PrCr x1, RLx1

Input 1:RGB D-Sub 15 pin x1

Input 2:DVI-D(HDCP)x1, RL x1

RS-232 mini DIN 6 pins X 1

LT32HVM

32"

16:9

1366 X 768

1600:1

178 (H) / 178 (V)

12 ms

30~85 KHz(H) / 50~80Hz(V) Max. 1360x768 @60Hz

NTSC

480i, 480p, 720p, 1080i

Full screen, 4:3, 16:9, Panoramic

ON/OFF, Low, Middle, Strong

Cool, Middle, Warm, User

15W + 15W

MTS (Mono / Stereo / SAP)

EQ1 and EQ2

NTSC VHF/UHF tuner x 1

Input 1:AV x1, S-Video x1, RL x1 Input 2:AV x1, S-Video x1, RL x1 Input 3:Y, Pb/Cr, Pr/Cr x1, RLx1 Input 4:Y, Pb/Cb, PrCr x1, RLx1

Input 1:RGB D-Sub 15 pin x1

Input 2:DVI-D(HDCP)x1, RL x1

RS-232 mini DIN 6 pins X 1

* NOTE : Product Specification is Subject to Change without Notice.

Specifications

Output Terminals

Audio Output(Rear)

Others

(Voltage)

Power

(Power Consumption)

Stand-by

Dimensions (W x D x H)

Carton Dimensions (W x D x H)

Weight w/o stand

Weight

Gross Weight

Dimensional drawing

LT32HVE LT32HVM

Output 1: Stereo Audio R/L x1

Output 2: Earphone x 1

100~240 VAC / 50-60 Hz

135W

< 3W

39.8 in x 5.1 in x 21.72 in

42.52 in x 12 in x 26.38 in

lbs

46.71

lbs

50.72

66.15 Ibs

20.5in

Output 1: Stereo Audio R/L x1

Output 2: Earphone x 1

100~240 VAC / 50-60 Hz

135W

< 3W

39.8 in x 5.1 in x 21.72 in

42.52 in x 12 in x 26.38 in

lbs

42.31

lbs

46.3

61.74 Ibs

21.72in

5.1in

25.59in

39.8in

9.06in

Timing Mode for VGA and DVI

Source

YPbPr

VGA

Resolution

480p

720p

1080i

512 x 384

640 x 350

640 x 400

640x480

720 x 350

720 x 400

800 x 600

832 x 624

1024 x 768

59.94

60.147

74.6

Horizontal frequency (Khz)Vertical frequency(Hz)

31.469

33.75

24.48

37.861

24.823

30.296

30.295

34.975

37.861

37.5

39.375

43.269

31.469

37.927

39.444

35.156

37.879

48.077

46.875

53.674

49.725

48.193

47.699

48.363

56.476

56.287

57.87

60.241

Pixel rate (MHZ)

74.25

15.667

31.5

21.05

24.964

25.024

30.24

31.34

30.24

31.5

28.32

35.5

49.5

56.25

64.1

Timing Mode for VGA and DVI

Source

VGA

DVI

Resolution

1024 x 768

1152 x 864

1152 x 870

1152 x 900

1024 x 1024

1280x 960

1280 x 720

1280 x 768

1280 x 1024

1366 x 768

1024 x 768

1280 x 720

800 x 600

1024 x 768

1280 x 768

1366 x 768

Vertical frequency(Hz) Horizontal frequency (Khz)

70.012

75.062

65.95

66.004

76.047

76.149

61.399

50.014

56.041

60.317

60.004

60.241

62.937

61.08

60.023

62.04

68.677

63.851

67.5

68.681

61.795

61.846

71.713

71.809

63.36

65.286

48.36

63.981

47.7

48.363

37.879

48.363

48.36

47.7

Pixel rate (MHZ)

84.6

78.75

84.4

94.5

108

100

92.9

94.5

105.6

108

89.2

92.9

108

74.25

81.631

108

85.8

32.5

74.25

81.631

Pixels Policy

Syntax's D.O.A. Policy for LCD TVs for Defective Pixels on LCD Panels

(Applicable to the LCD TV sold within USA & Canada only)

Syntax LCD TVs are evaluated at a distance of approximately 50 centimeters (approximately 20 inches) between the LCD panel and the eyes of the user at a 90 degrees viewing angle. All LCD panels have been tested to ensure they comply with our factory standards. Our evaluation is based on the number of defective pixels and the distance between any two defective pixels. Bright dots are dots that appear bright and unchanged in size when a LCD TV screen displays under a black pattern; dark dots are dots that appear dark and unchanged in size when a LCD TV screen is displayed under pure red, green, or blue patterns ("defective pixels"). Adjacent dots are dots located directly next to each other.

Customers are required to check their LCD panel immediately after purchase. To identify defective pixels, the LCD panel should be examined under normal operating conditions as mentioned above, preferably in its native display resolution, and with a 90 degrees viewing angle.

A LCD TV will be considered dead on arrival (D.O.A.) with regards to defective pixels on the LCD panel when any one of the following criteria is met:

A total of 7 defective pixels including both bright dots and dark dots are present (the typical 30" LCD Television screen has 16.7 million pixels), or 2 or more pairs of adjacent bright dots are present, or 3 adjacent bright dots are present, or 3 adjacent dark dots are present.

In view of customers' concerns about dead pixels, Syntax would like to address that defective pixels are not ultimately avoidable with the current LCD industry standard panel manufacturing processes. We always strive to improve our technology and minimize the chance of occurrence of defective pixels by applying strict screening processes in our factory production processes. However, Syntax cannot guarantee that a return unit to our customers will be 100% free of defective pixels.

For questions, please call our toll free service number in the USA at 888-SYNTAX-8.

"At SyntaxGroups, a satisfied customer is our most important focus."

Glossary

3:2 pull down - Process of converting 24 frames per second film to video by repeating one film frame

as three fields, then the next film frame as two fields.

1 1 1 2 2 1 1 1 2 2

480I - 480 lines of display every 1/60 of a second; image is displayed by interlace scanning. See

also Interlaced

480P - 480 lines of display every 1/60 of a second; image is displayed by progressive scanning. See

also Progressive.

720P - 720 lines of display every 1/60 of a second; image is displayed by progressive scanning. See

also Progressive.

1080I - 540 lines of display x 2 every 1/30 of a second; image is displayed by interlace scanning.

Olevia LT32HVM, LT32HVE User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual