STTC
.54"
0.4mm
.016"
13.7mm
.63"
Soldering Tip Cartridges
STTC soldering tip cartridges are for use with the MX and the STSS soldering/rework hand-pieces only.
They cannot be used with the SP systems, the Talon
®
or desoldering hand-pieces.
FREQUENTLY USED TIP CARTRIDGES
STTC-X36* Chisel 30° .10” (2.5mm)
For medium to heavy load joints requiring extra reach.
STTC-X37* Chisel 30° .07”(1.78mm)
For a wide variety of tasks. If you are choosing the first tip for your
Metcal system, the STTC-037 is ideal.
STTC-X38* Chisel 30° .06” (1.5mm)
A finer version of the STTC-037. Ideal for medium to light throughhole and general surface mount touch-up.
MX Tips
STTC-X25 Chisel 30° .04” (1.0mm)
Good for a variety of light soldering tasks. Looking for a surface
mount touch-up tip? The STTC-025 should be your first choice.
STTC-X07 Conical Sharp .04” (1.0mm)
General-purpose SMT and through-hole tip when access is limited.
STTC-X22 Conical Sharp .016” (0.4mm)
Sharp tip cartridges for soldering SMT components or fine wire
applications (not for general through-hole tasks).
STTC-X06 Conical Sharp .016” (0.4mm)
For limited access SMT rework.
STTC-X40 Sharp Bent 30° .016” (0.4mm)
Tip for soldering SMT components. The bend makes it much
easier to work on small circuits and PLCCs.
STTC-X45 Bevel 60° .016” (0.4mm)
An extended length fine tip for surface mount or fine wire
applications (not for general through-hole tasks).
page
07
For Lead Free STTC Power tip enhancements, please see page 20.
500 SERIES X=5 600 SERIES X=0 700 SERIES X=1 800 SERIES X=8, WHEN FOLLOWED BY AN *
OTHER STANDARD TIP CARTRIDGES
.07"
.63"
1.78mm
16.0mm
.39"
.07"
9.9mm
30°
.39"
1.78mm
.07"
14.2mm
60°
1.78mm
.56"
.46"
.07"
30°
1.78mm
11.7mm
MX Tips
STTC-X17*
Extra Large Chisel
.20” (5.0mm)
STTC-X65
Large Chisel
.20” (5.0mm)
STTC-X20
Long Reach
Chisel 12°
.15” (3.8mm)
STTC-X03*
Chisel 90°
.12” (3.0mm)
STTC-X13
Chisel 90º
.12” (3.0mm)
STTC-X33
Chisel 90°
.10” (2.5mm)
STTC-X02
Conical Sharp
.07” (1.78mm)
STTC-X01
Conical Sharp
.04” (1.0mm)
STTC-X31
Conical Sharp
.04” (1.0mm)
STTC-X43
Conical Sharp
.02” (0.5mm)
STTC-X12
Conical
.08” (2.03mm)
STTC-X11
Conical
.02” (0.5mm)
page
08
STTC-X04
Chisel 90°
.07” (1.78mm)
STTC-X42
Long Reach Chisel 60°
.07” (1.78mm)
STTC-X98
Chisel Bent 30º
.07” (1.78mm)
STTC-X99
Chisel Bent 30°
.06” (1.5mm)
STTC-X41
Chisel 30°
.05” (1.3mm)
STTC-X83
Conical Grooved
.08” (2.0mm)
STTC-X32
Conical Sharp
.07” (1.78mm)
STTC-X16
Conical
.02” (0.5mm)
STTC-X44
Sharp Bent 30º
.02” (0.5mm)
STTC-X26
Sharp Bent 30°
.016” (0.4mm)
STTC-X14
Bevel 45º
.08” (2.03mm)
STTC-X35
Bevel 30°
.07” (1.78mm)
STTC-X47
Bevel 60°
.07” (1.78mm)
STTC-X05
Bevel 30°
.07” (1.78mm)