Page 1
Memory DIMM
Installation Instructions
For DIMM Part Numbers
256 MB: 70051601
512 MB: 70051701
59388101, Am Eng
Page 2
Copyright Information
© 2006 by Oki Data Americas, Inc. All rights reserved.
Document Information
Memory DIMM Installation Instructions
P/N 59388101
June, 2006
Disclaimer
Every effort has been made to ensure that the information in this document is
complete, accurate, and up-to-date. The manufacturer assumes no responsibility for
the results of errors beyond its control. The manufacturer also cannot guarantee that
changes in software and equipment made by other manufacturers and referred to in
this guide will not affect the applicability of the information in it. Mention of software
products manufactured by other companies does not necessarily constitute
endorsement by the manufacturer.
For the latest product information, printer drivers, manuals, special offers, etc., go to
www.okiprintingsolutions.com
Trademark Information
OKI is a registered trademark of Oki Electric Industry Company, Ltd.
Macintosh is a trademark of Apple Computer, Inc., registered in the U.S. and other
countries.
Windows and Windows NT are either registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
Other product names and brand names are registered trademarks or trademarks of
their proprietors.
Page 3
Installation
Caution!
Circuit boards can be damaged by static electricity and rough
handling. Keep the board in its packaging until you're ready to install
it.
1. Turn off the printer (1).
2. Unplug the power cord (2).
3. Detach the interface cable from the back of the printer (3).
C6100_1.jpg
3
Page 4
4. Open the top cover.
C6100_2.jpg
5. Open the front cover.
c6100_3.jpg
4
Page 5
6. Loosen the thumbscrew holding the printer side cover in place.
c6100_4.jpg
5
Page 6
7. Lift up on the ends. Remove the side panel from the printer.
c6100_5.jpg
8. Locate the DIMM socket.
c6100_7.jpg
6
Page 7
Caution!
To avoid damage, ground yourself (touch metal) before handling
DIMMs.
9. Remove the DIMM from its shipping package.
10. Position the DIMM as shown.
c6100_6.jpg
7
Page 8
11. Hold the DIMM at about a 30o angle and press the DIMM in firmly
into the socket until the DIMM snaps into place.
c6100_8.jpg
8
Page 9
12. Once the DIMM is firmly seated, push back until it snaps flat
against the main board.
Note: The gold connectors on the DIMM should not be visible.
C6100_10.jpg
9
Page 10
13. Place the side panel on the printer. Use the thumbscrew to secure
the panel.
c6100_4.jpg
10
Page 11
14. Close the front cover.
c6100_15.jpg
15. Close the top cover.
c6100_16.jpg
16. Attach the interface cable.
17. Plug in the power cord.
18. Turn on the printer.
11
Page 12
Verify the Installation
Print the MenuMap
Note: The MenuMap is a list of the current menu settings.
Keypad.eps
1. Press + one or more times until INFORMATION MENU displays.
2. Press
The MenuMap prints.
3. Look at the top of the printout. Find the Total Memory Size.
Total Memory Size = Standard Memory + Additional Memory.
If the number on the MenuMap is wrong
Repeat the installation steps (page 3) until the Total Memory Size
on the MenuMap is correct.
ENTER twice.
12
Loading...