Oki 6120e, 6120i Product update [es]

OkiLAN® 6120e & 6120i

Product Update

Revised Regulatory Information

Federal Communications Commission

(FCC)

FCC General Statement

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.

FCC Radio Frequency Interference Statement

WARNING: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
commercial environment. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct
the interference at their own expense.

Note:

Changes or modifications not expressly approved by Oki Data
may void your authority to operate this device.

Industry Canada (IC) Statements

IC Radio Interference Statement

This Oki Data apparatus complies with the Class A limits for
radio interference as specified in the IC Radio Interference
Regulations.

It is the responsibility of the user to obtain the required
shielded cable in order to ensure compliance of this
equipment with FCC regulations.

TELNET

These network print servers do not support TELNET.

Resetting to Factory Defaults

1. Turn off the printer.

2. Turn on the printer and wait for the print server to boot up
(about 30 seconds).

3. Press and hold the TEST button on the print server for about
15 seconds.

6120e_8 CROP.jpg

4. Release the TEST button.

The print server resets to the factory default settings and
reboots.

IC Interference-Causing Equipment Regulations

This Class A digital apparatus complies with Industry Canada
ICES-003. Cet appareil numérique de la classe A est conforme
à la norme NMB-003 du Canada.

European Union Council of th e
European Communities
Statement of Conformance

This product complies with the requirements of the Council
Directives 89/336/EEC (EMC) and 73/23/EEC (LVD) as
amended where applicable on the approximation of the laws of
the member states relating to electromagnetic compatibility
and low voltage.

WARNING!

environment this product may cause radio interference, in
which case the user may be required to take adequate
measures.

© 2006 Oki Data Americas, Inc. 58380001

This is a Class A product. In a domestic

OkiLAN ® Oki Electric Industry Company, Ltd.