Oki 10i User Manual
Read Me First
Every effort has been made to ensure that the information in
this document is complete, accurate, and up-to-date. Oki
assumes no responsibility for the results of errors beyond its
control. Oki also cannot guarantee that changes in software
and equipment made by other manufacturers and referred to
in this guide will not affect the applicability of the
information in it. Mention of software products manufactured
by other companies does not necessarily constitute
endorsement by Oki.
Copyright 1997 by Oki. All rights reserved.
First edition 08/1997.
Written and produced by the Oki Documentation Dept.
Oki Systems (UK) Limited
550 Dundee Road
Slough Trading Estate
Slough, Berks. SL1 4LE
Tel: 01753-819819
Fax: 01753-819899
http://www.oki.co.uk
Oki is a registered trademark of Oki Electric Industry
Company Ltd.
ENERGY STAR is a trademark of the United States
Environmental Protection Agency
TrueType is a registered trademark of Apple Computer
Company
Hewlett-Packard, HP, and LaserJet are registered trademarks
of Hewlett-Packard Company.
IBM is a registered trademark of International Business
Machines Corp.
Microsoft and MS-DOS are registered trademarks and
Windows is a trademark of Microsoft Corporation.
Oki Systems (Ireland) Limited
The Square Industrial Complex Hawthorn Business Centre
Tallaght Adelaide Industrial Estate
Dublin 24 Falcon Road
Belfast BT12 6HP
Tel: (01) 4598666 Tel: (01232) 572355
Fax: (01) 4598840 Fax: (01232) 572350
http://www.oki.ie http://www.oki.ie
This product complies with the requirements of the Council
Directives 89/336/EEC and 73/23/EEC on the approximation of
the laws of the member states relating to electromagnetic
compatibility and low voltage.
NERGY STAR Partner, Oki has determined that this product
As an E
meets the ENERGY STA R guidelines for energy efficiency .
OKIPAGE 10i2
Contents
Safety Instructions .......................................................... 4
Important Wiring Instructions ....................................... 5
Printer Features ............................................................... 6
Optional Accessories ......................................................6
Check the Contents ......................................................... 7
Printer Components ........................................................ 8
Setting Up Your Printer ................................................... 9
Remove the Protective Sheet ..................................... 9
Installing Toner ........................................................ 1 0
Installing Paper ........................................................ 1 2
Connecting Your Printer .............................................. 1 3
Installing the Printer Driver ........................................ 1 4
From Windows™ 3.1x/NT 3.51 ............................. 1 4
From Windows 95™ ................................................ 1 4
From Windows™ NT 4.0 ......................................... 14
Changing the Language ............................................... 1 5
Creating Sample Printouts ........................................... 15
Demo Page ................................................................ 1 5
Sample Font Listing ................................................. 1 5
Index ............................................................................. 16
English
Read Me First 3
Safety Instructions
Your Oki printer has been carefully designed to give you
years of safe, reliable performance. As with all electrical
equipment, however, there are a few basic precautions you
should take to avoid hurting yourself or damaging the printer:
• Read the setup instructions in this handbook carefully.
Be sure to save it for future reference.
• Read and follow all warning and instruction labels on
the printer itself.
• Unplug the printer before you clean it. Use only a damp
cloth; do not use liquid or aerosol cleaners.
• Place your printer on a firm, solid surface. If you put it
on something unsteady, it may fall and be damaged; if
you place it on a soft surface, such as a rug, sofa, or bed,
the vents may become blocked, causing the printer to
overheat.
• To protect your printer from overheating, make sure all
openings on the printer are not blocked. Do not put the
printer on or near a heat source, such as a radiator or
heat register. Keep it out of direct sunlight. Allow enough
room around the printer for adequate ventilation and
easy access to the paper trays.
• Do not use your pr inter near water, or spill liquid of any
kind into it.
• Be certain that your power source matches the rating
listed on the back of the printer. If you are not sure, check
with your dealer or with your local power company.
• Your printer has an earthed, 3-pin plug as a safety fea ture,
and it will only fit into an earthed outlet. If you can not
plug it in, chances are you have an older, non-earthed
outlet; contact an electrician to have the outlet replaced.
Do not use an adapter to defeat the earthing.
• To avoid damaging the power cable, do not put anything
on it or place it where it will be walked on. If the cable
becomes damaged or frayed, replace it immediately.
• If you are using an extension cable or power strip with
the printer, make sure that the total of the amperes
required by all the equipment on the extension is less than
the extension’s rating. The total ratings of all equipment
plugged into the outlet should not exceed 13 amperes.
• This printer must be installed near to a power outlet
switch which shall remain easily accessible.
• It is recommended that the printer be switched off prior
to opening or removing covers
• Do not insert anything into the ventilation slots on the
printer; you could get a shock or cause a fire.
OKIPAGE 10i4
Important Wiring Instructions
• Aside from the routine maintenance described in this
handbook, do not try to service the printer yourself;
opening the cover may expose you to shocks or other
hazards.
• Lifting the top cover exposes hot surfaces. These are
clearly labelled. Do NOT touch them.
• Do not make any adjustments other than those outlined
in the handbook, you may cause damage requiring
extensive repair work.
If anything happens that indicates that your printer is not
working properly or has been damaged, unplug it
immediately and contact your dealer.
These are some of the things to look for:
• The power cable or plug is frayed or damaged.
• Liquid has been spilled into the printer, or it has been
exposed to water.
• The printer has been dropped, or the cabinet is damaged.
• The printer does not function normally when you are
following the operating instructions.
The wires in the power cable are coloured in accordance with
the following code:
Green and Yellow — Earth
Blue — Neutral
Brown — Live
If the colours of the wires in the power cable of this printer
do not correspond with the markings of the terminals of your
plug, proceed as follows:
• Green and Yellow must be connected to the terminal
marked with the letter E (or the safety earth symbol) or
the terminal coloured Green or Green & Yellow.
• Brown must be connected to the terminal marked with
the letter L or coloured Red.
• Blue must be connected to the terminal marked with the
letter N or coloured Blue or Black.
This printer must be earthed.
If you are in any doubt regarding the wiring, please contact
a qualified electrician.
English
Read Me First 5
Loading...