Ohsung Electronics URCTDC7100 User Manual

Order Number : GETEC-C1-16-340 FCC Part 15 subpart C

Test Report Number : GETEC-E3-16-047 Page 1 / 1

APPENDIX H

: USER’S MANUAL

EUT Type: Wireless Remote Controller

FCC ID.: OZ5URCTDC7100

TDC-7100

Owner’s Manual

Introducing the TDC-7100

Thank you for purchasing the TDC-7100 table top networking keypad. Its easy intuitive design
helps to simplify your life while adding control of more things than you thought possible.

Enjoy some key features like:

Audio Video Intercom

Easily communicate throughout your home using the Audio Video Intercom feature amongst all
Intercom enabled devices, including Total Control Mobile devices (iOS and Android), on the
network. You can also make sure the baby is safe and sound by viewing the baby monitor right on
the TDC-7100.

Proximity Sensor

The TDC-7100 comes to life and is ready for action as it automatically senses how close you are to
the keypad. Utilizing its proximity sensor, it can detect distances from up to 100cm away, this
setting can be adjusted from within the Settings menu.

Inductive Charging

Readily charge the TDC-7100 with its sleek, easy to place charging dock. This quickly charges the
keypad in approximately five (hours) and holds a charge for up to three (3) days.

Wi-Fi Ready

Charging Dock

Connecting to the network is made easy with built in Wi-Fi on the TDC-7100. It seamlessly
connects to your network with the Quick Wi-Fi feature and can be used anywhere in the home,
where wireless signal is available.

Parts List

Included with the TDC-7100:

1x - TDC-7100

1x - TDC-7100 Inductive Charging Dock

TDC-7100

Main Menu Navigation

Although specific screen design and certain options are dictated by the custom integrator that
programmed the Total Control system, the general layout remains the same. Actual navigation is
performed through screen swipes ( ) while selecting any item is as simple as
pressing the icon/text to be selected.

Title Bar

The Title Bar is present on all TDC-7100 screens and contains valuable information during normal
use. Easily find out the time, weather, now playing and the room that the keypad is controlling.

Time & Weather

This data, found on the left-hand side of the Title bar shows the
current time, date, and weather information. Pressing this area of
the Title Bar opens the Time & Weather Module. For
information about this module, refer to the Time & Weather
Module section, later in this manual.

Current Room

The current room portion of the Title Bar shows the room that
the TDC-7100 is controlling. Remember, in a Total Control
system, although each room’s keypad defaults to control the
room in which is is placed, using the Rooms Menu allows it to
control any other room in the system.

Now Playing

Appearing on the right-hand side of the Title Bar, this displays the source that is currently being
used in the room that the keypad is controlling.

● The Now Playing display shows the device that is being used (in this case, William’s iPod),
associated artwork, and metadata information is displayed since it is a URC media device.

● If an activity is being performed (like DVD or cable) in the selected room, the Now Playing
section displays the activity:

Category/Device Ribbon

This ribbon shows the various categories of control that are available to the selected room. The
quantity of categories is determined by the system setup and can vary from one to however many
categories were programmed by the system designer.

Although only seven categories can fit on the screen at any moment, navigate to other categories
( ) by swiping left or right.

Select a category by pressing the appropriate icon; this reveals the devices/activities available for
that category ( ).

Device List

Submenus contain the devices/activities that were placed in the chosen category by the system
programmer.

Scroll up or down through the list by swiping upwards or downwards, select a device/activity by
pressing its icon.

Core Buttons

These key system navigation buttons always are present at the bottom of the screen.

Vol-, Vol+, & Mute

These audio controls affect the volume for the room to which
the TDC-7100 is assigned. See the Rooms Menu section of
this manual for more details.

Main

Selecting this button always returns the user to the Main
screen.

Shortcuts

These user-configurable shortcuts allow the end-user to store
up to six (6) favorite activities. For more information about
using short cuts, refer to the Using Shortcuts section of this
manual.

Rooms

This button opens the Rooms menu which allows you to take
control of any room programmed into your Total Control
system. For more information on the Rooms menu, please
refer to the Rooms Menu section.

Power Menu

This button opens the Power menu which gives you the
ability turn off the entire home, a single room, and more.
Refer to the Power Menu section for more information.

Status Bar

The Status Bar, located directly above the Core Buttons, provides valuable status and feedback of
the Total Control System. The four sections of the Status Bar are determined by the system
programmer and are customizable per keypad. It is not possible to explain how your keypad looks;
however, after reviewing the following possibilities, there should be no need for further
explanation.

Sunrise Time: Updated at midnight every day, this shows the
sunrise time for the next day.

Sunset Time: Updated at midnight every day, this shows the
sunset time for the next day.

URC Thermostat Temperature: If a THZ-100 (URC’s
thermostat) is included in the home, this shows the current
temperature status based upon the internal sensor, additional
sensor, or the mean temperature of both.

Alarm Clock: If the room being controlled has an Alarm that is
set to activate for that room, the status bar displays an alarm
clock icon and the next scheduled time/day.

Surround Mode: When used with URC’s DMS-AV Surround
Processor, this displays the current surround mode of the
processor.

Room Linked Status: Whenever the chosen room/area is
“linked” to other rooms, this shows a link acknowledgement
and icon.

Weather Alerts: Based on the current location entered by the
system programmer, the words “weather alert” appear if an
automatic alert is received via Internet.

Vacation Mode: Whenever the Vacation Mode is activated for
the Total Control system, the status bar displays “Vacation
Mode: ON”.

Audio Video Intercom Menu

The Intercom module communicates with other installed TDC-7100’s via audio, audio & video, or a
baby monitor. In order to use the intercom it must first be enabled within the Settings screen.

Using the Intercom

1. Touch the screen and navigate through the Category ribbon (scroll left or right) to locate

the Intercom icon.

2. Press the Intercom icon.

3. A list of available client (other TDC-7100 clients) are shown. Select an available client.

Unavailable
client set to
do not
disturb.

Available
client

Busy client
on call

4. When an available client is selected, you have the option to select from audio only, audio
and video, or a baby monitor.

● Audio: Two-way communication between
clients and via audio only.

● Audio and Video: Two-way communication
between clients via audio and video.

● Baby Monitor: One-way communication to
view and listen to a room where the secondary
client cannot hear or see you.

5. After selecting an option, the TDC-7100 turns the unit’s camera ON (

) displaying an onscreen image of the selected client.

6. Pressing the End Call button displays an onscreen message concluding the call.