Ohsung Electronics URCSNP2 User Manual

G

Order Number

: GETEC-C1-13-352

FCC Part 15 subpart B

Test Report Number

: GETEC-E3-13-089 Page 1 / 1

APPENDIX G

: USER’S MANUAL

EUT Type: Streaming Network Player

FCC ID.: OZ5URCSNP2

Owner's Manual

SNP-2

Streaming Network

Music Player

SNP-2 Owner’s Manual ©2013 Universal Remote Control, Inc.

The information in this Owner’s Manual is copyright protected. No part of this
manual may be copied or reproduced in any form without prior written consent
from Universal Remote Control, Inc.

UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR
OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN
THIS MANUAL.

The information in this Owner’s Manual may be subject to change without prior
notice.

Total Control is a registered trademark of Universal Remote Control, Inc.

URC - Control the Experience is a registered trademark of Universal Remote
Control, Inc.

SiruisXM, Rhapsody, vTuner and Pandora are all registered trademarks.
All other brand or product names are trademarks or registered trademarks
of their respective companies or organizations.

Universal Remote Control,Inc.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: [phone] Fax: [phone]

TABLE OF CONTENTS

Congratulations! 1

Features and Benefits 1

Parts Guide 2

Front Panel Description 3

Rear Panel Description 4

Installation 5

Navigation 8

Music Services 11

Settings 15

Specifications 28

Limited Warranty Statement 29

End User Agreement 31

Federal Communication Commission
Interference Statement 32

Declaration of Conformity 33

SNP-2 STREAMING NETWORK PLAYER

Congratulations!

Thank you for purchasing the SNP-2 Streaming Network Music
Player! Listen to popular music services like Rhapsody, Pandora,
vTuner, and SiriusXM. Also listen to your stored music via
Windows Media Player or My Music, which will play music from
local shared folders and iTunes playlists. Integrate the SNP-2 with a
Total Control system to listen throughout your home or office, use
as a standalone device using Complete Control or other third party
control products.

View, and control what is playing from any Total Control remote,
keypad or iOS device. Also use the SNP-2’s HDMI output to view
and control its interactive and engaging on-screen interface.

Features and Benefits

• HDMI Output
Utilize the SNP-2’s HDMI output to enjoy and quickly
navigate through its interactive and colorful onscreen
television experience.

• Streams Popular Music Services
Subscribe and listen to popular music services such as
SiriusXM, Rhapsody, Pandora and vTuner.

• Plays Compatible Network Music
Access stored music via My Music or Windows Media
Player, on your PC, Mac or network attached storage hard
drives. Compatible audio formats include: MP3 (16 kbps to

320 kbps), WMA, ACC, OGG, FLAC (16 & 24 bit and up to
192kHz sample rate), ALAC (Apple Lossless), M4A, and WAV.

• Full Two-way Communication
View song information on your television as well as your
Total Control remote, keypad or mobile device.

• Third-Party Integration

Easily integrate other brands with the SNP-2 by using the
analog or digital outputs.

• Easy rack-mounting
Streamline and organize your SNP-2 along with the rest of
the Total Control system by integrating the optional RMK-1

rack-mounting kit.

Page 1

SNP-2 STREAMING NETWORK PLAYER

Parts Guide

The SNP-2 Streaming Network Player includes:

1 - SNP-2 Streaming Network Player 1 - AC Power Adapter
1 - Ethernet Cable 1 - Owner’s Manual

Page 2

SNP-2 STREAMING NETWORK PLAYER

Front Panel Description

Ethernet

Power

Reset

Power LED: Indicates the SNP-2 is connected to power.

Ethernet LED: Indicates the network connectivity status.

● ON = Connected

● OFF = Not Connected

● Blinking = Attempting to connect

Reset Button: The front panel reset button offers a quick way to
power cycle or reset the SNP-2 back to its factory state.

● Power Cycle: Press to turn the unit OFF then back ON
again while retaining your music account information.

(Ie. login and music libraries.)

● Factory State: Pressing and holding for 15 seconds will
revert the SNP-2 back to its factory state while also
removing your music account information. (Ie. login and

music libraries.)

Page 3

SNP-2 STREAMING NETWORK PLAYER

Rear Panel Description

Power Control IR IN

LAN

Analog Audio

Coaxial

HDMI Output

Power 12V (1A): The power socket accepts either UL/CSA approved
110V power cords or CE approved 220V power cables to be used
with the power supply. The power supply’s operating range is from
100V to 240V.

LAN: A 10/100 LAN connection ensures that the SNP-2 sends a
network stream to the DMS amplifiers. Also receives streams from
popular music services and networked hard drives.

Control IR IN: Connect a URC RF base station to control the SNP-2
with a one-way URC remote control.

HDMI Output: HDMI, 1.4A compatible, contains both digital
audio and digital video signals.

Coaxial Digital Audio Output: Connect to a coaxial digital input of
a device to enjoy digital quality music.

Analog Audio (L, R): Connect to the analog inputs of a device.

Page 4

SNP-2 STREAMING NETWORK PLAYER

Installation

Total Control Interface View Only (Streaming Audio Device)

The SNP-2 can be used as a streaming audio device in up to 32
zones by broadcasting its proprietary audio signal over the local
area network to the Total Control system. The signal is then received
by a DMS-100, DMS-1200 or a DMS-AV, all while the user controls
the music selection from one of the Total Control interfaces like the
TRC-1080.

TRC‐1080

1. Plug the power cord into the rear of the SNP-2 and the other
end into a power outlet.

2. Plug the Ethernet RJ45 cable to the LAN port in the rear of
the SNP-2 and plug the other end into an available port of a
router or URC MFS switch.

3. Control the SNP-2 directly from a Total Control interface such
as a TRC-1080. (Requires the Custom Professional to

download the program to the Total Control system.)

Page 5

SNP-2 STREAMING NETWORK PLAYER

Hybrid Total Control System

While the SNP-2 is streaming over the network, its interface can be
viewed and controlled via an HDMI display such as a television or
an audio/video receiver.

TRC‐1080

1. Plug the power cord into the rear of the SNP-2 and the other
end into a power outlet.

2. Plug the Ethernet RJ45 cable to the LAN port in the rear of
the SNP-2 and plug the other end into an available port of a
router or URC MFS switch.

3. Connect an HDMI cable to the rear of the SNP-2 and an
HDMI TV.

4. Control the SNP-2 from a Total Control interface or from the
television. (Requires the Custom Professional to download

the program to the Total Control system.)

Page 6

SNP-2 STREAMING NETWORK PLAYER

Standalone Operation

The SNP-2 also functions without a Total Control system, by simply
adding a URC Complete Control RF base station and RF remote
control.

MX‐780

1. Plug the power cord into the rear of the SNP-2 and the other
end into a power outlet.

2. Plug the Ethernet RJ45 cable to the LAN port in the rear of
the SNP-2 and plug the other end into an available port of a
router or URC MFS switch.

3. Connect an HDMI cable to the rear of the SNP-2 and an
HDMI TV.

4. Connect a URC RF base station to the IR input of the SNP-2.

5. Program a compatible one-way URC remote to communicate
with the RF base station. (Requires the URC Certified Custom

Professional to program the URC remote and base station.)

Page 7

SNP-2 STREAMING NETWORK PLAYER

Navigation

Music Menu

The SNP-2’s on-screen interface displays a title bar, music services
and recent stations or tracks. Navigate all screens using any of the
Total Control interfaces, such as a TRC-1080 or a compatible mobile
device using the Total Control Mobile app.

Music Services Ribbon

Title Bar

Title Bar

Quick Selection List

The Title Bar is available on all SNP-2 screens and displays the Date
and Time, Title Name and Now Playing metadata.

Date and Time Now PlayingTitle name

● The Date and Time are automatically updated via the

internet.

● The Title Name may differ based on how it was programmed

by your URC Certified Custom Professional.

● The Now Playing section of the Title bar displays information

for the current audio selection.

Music Services Ribbon
Select one of the music services using the remote’s Left/Right
navigation arrows to scroll. Then press the Select button to choose a
service.

Quick Selection List
When selected, each music service lists its recently played stations
and tracks. This provides instant access to your common stations.
After selecting a service, press the Down arrow to choose from the
recent list, then Select to choose a recently played item.

Page 8

SNP-2 STREAMING NETWORK PLAYER

Music Service

The Music Service options will vary per service and provide specific
categories for you to browse. However, navigation with the
directional arrows remains the same.

Music Service Options Alpha Index

Menu/ Music Menu Button

Music Service Options
Use the Left/Right and Up/Down navigation buttons to move to the
next icon. Pressing the CH+/CH- buttons will quickly scroll
through a list a page at a time. Pressing and holding the navigation
buttons will continously cycle to the next item.

Alpha Index
Some screens display an alphabetical index so you can quickly
search your music library. When available, the Alpha Index search
displays for 2 seconds. Simply press the Right navigation arrow to
move to the index, then press the Up or Down arrows to select a
letter. Press the Select button to choose.

Menu/Music Menu Button
Selecting the Menu/Music Menu button will return you to the
previous menu or the Main SNP-2 screen.

Page 9