Ohio Steel 5026V2 User Manual
5026V2
26 cu ft LAWN SWEEPER
U.S. Patent No. 7,610,646
READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS BEFORE USING THIS EQUIPMENT
6004083 - REV A 11/17
Safety Rules
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Read and understand all safety rules and operating instructions before using this
tractor attachment.
Follow all safety rules and operating instructions provided by your tractor's
manufacturer when using attachment.
Never allow children or untrained persons to operate tractor or attachment.
Reduce tractor speed to slowest setting when towing or operating on slopes.
Operate up and down slopes, never across the face of slopes.
Do not carry passengers on tractor or attachment.
Avoid sudden turns or maneuvers.
Use caution when backing up to prevent damaging attachment.
Do not tow attachment on public roadways.
Do not remove warning decals from product.
Check product for worn, loose, or damaged parts before each use. If any damage
is present, repair the product before using.
Check product for loose or missing fasteners before each use. Tighten or replace
fasteners as needed before using.
Do not fasten rope to any part of your body or clothing.
Do not hold rope while tractor and Lawn Sweeper are in motion.
Do not use Lawn Sweeper near fire or smoldering debris.
Always fasten rope to tractor to avoid contact with wheels and brushes.
Always empty hopper before storing to avoid spontaneous combustion of contents.
Do not exceed tractor speed of 6 miles per hour when towing or operating Lawn
Sweeper.
1
34
(x1)
(x2)
Carton Contents
35
(x2)
40
(x1)
36
(x2)
38
41
(x2)
(x2)
47
(x2)
44
39
(x2)
(x6)
43
(x2)
37
42
(x1)
(x1)
48
(x1)
TOOLS REQUIRED FOR ASSEMBLY:
9/16" Open End Box Wrench
•
2
Assembly Instructions
1
2
Remove tethered pin and unfold hitch from storage postion.
4
Replace pin in desired postion along Hitch Cross Tube
3
Attach Height Adjustment Handle Using a 9/16" Open End Box Wrench
2
3
Assembly Instructions
4
5
Insert Bottom Frame Tubes into Rear Frame Tube and snap into position.
35
35
Insert Top Frame Tubes into Rear Frame Tube and snap into position.
34
34
6
36
36
Slide Hopper Bar into pocket of Hopper Bag as shown.
40
37
4
Loading...