Ohio Steel 3448HKD User Manual

3448HKD REPAIR PART LIST

3448HKD

16 CUBIC FOOT

HEAPED DUMP CART

ASSEMBLY MANUAL

REF. NO.PART NO. QTY. DESCRIPTION REF. NO.PART NO. QTY. DESCRIPTION

1 262-01 1 RIGHT BOD Y H ALF 16 26-16A 1 HITCH BR ACKET 2 262-02 1 LEFT BODY HALF 17 26-17 1 AXLE 3 26-03 1 FRONT GATE 18 26-18 2 HDPE SPACER 4 55-04 2 CORN ER 19 ST DWA1000T 4 AXLE W ASHER 5 26-05 1 REAR SUPPORT BAR 21 26-21 2 WHEEL 6 262-06 1 TAIL GATE 23 STDNK313 50 5/16"-18 KEPS NUT 7 55-7A 1 GAT E RET AINER RIGHT 25 ST DBP3130750 50 5/16" -18 x 3/4 PAN HEAD 8 55-8A 2 GAT E RET AINER LEFT 28 STD BH 3750750 1 3/8"-16 X 3/4" HEX HEAD

9 55-9A 1 FRONT SUPPORT 29 ST DNC375 2 3/8"-16 LOCK NU T 11 26-11 1 AXLE HOLD ER 30 ST DHP375 1 HIT CH PIN 12 26-12A 1 HITCH ASSEMBLY 31 STDPH7 3 HAIR PIN 13 55-13A 1 LATCH POST BAR 36 262-36 1 ASSEMBLY MANUAL 14 ST DBH3754000 1 LATCH BOLT 3/8"-16 x 4" HEX 41 262-BB 1 H ARDWARE BAG 15 55-15A 1 LATCH SPRING

REV-E

CAUTION: READ AND FOLLOW ALL SAFETY RULES

Ohio Steel Industries Columbus, OH 43224 U.S.A.

Visit our website: www.ohiosteel.com AND INSTRUCTIONS BEFORE USING THIS EQUIPMENT

For missing parts or questions

Call 1-800-652-2321

FULL TWO-YEAR WARRANTY

If this product fails due to a defect in material or workmanship within two years from the date of purchase, Ohio Steel will at its option repair or replace it free of charge. This warranty excludes Tires and Wheels which are expendable and become worn during normal use.

Proof of purchase required

This warranty does not cover:

· Repairs necessary because of operator abuse or negligence.

· Equipment use for commercial or rental purposes.

Contact Ohio Steel to arrange for product repair, or return this product to place of purchase for replacement.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This Warranty applies only while this product is in use in the United States.

TOOLS REQUIRED

Large blade screwdriver. 1/2" wrench and/or socket. Pliers.

SAFETY INSTRUCTION

Do not carry passengers in cart.• Do not tow cart on public roads.• Never exceed LOAD CAPACITY of 1250lbs.• Avoid sudden turns or maneuvers.• When operating on slopes, use lowest •

ground speed and limit load to 200lbs.

Operate up and down slopes, never •

across the face.

MAINTENANCE

Check tire pressure regularly, 30psi.• Periodically check all bolts.• Keep cart clean to prevent rust.• Store inside a clean dry area.•

CARTON CONTENTS

REF. NO. QTY. DESCRIPTION

11RIGHT BODY HALF 2 1 LEFT BODY HALF 3 1 FRONT GATE 42CORNER 5 1 REAR SUPPORT BAR 61TAIL GATE 7 1 GATE RETAINER RIGHT 8 2 GATE RETAINER LEFT

9 1 FRONT SUPPORT 11 1 AXLE HOLDER 12 1 HITCH ASSEMBLY 17 1 AXLE 21 2 WHEEL 36 1 ASSEMBLY MANUAL 41 1 HARDW ARE BAG

Step3. Loosely attach front gate and corners. Square assembly and tighten all bolts.

Axle Washer

Axle Spacer

Hair Pin

Axle Washer

Step 4. Center axle through axle holder & drawbar.

Place washer, spacer, washer, wheel onto axle.

Lock in place with hair pin cotter.

Axle Washer

Step1. Loosely assemble body halves as shown.

Axle Washer

Axle Spacer

Hair Pin

Step 5. Attach rear support bar and gate retainers. Insert tail gate and tighten bolts. Insert hitch pin and secure with hairpin cotter.

Step2. Loosely attach front support and axle holder.

Hitch

Hair Pin