Ohio Steel 3048HKD User Manual

3048HKD REPAIR PART LIST

HEAPED DUMP CART

3048HKD

12 CUBIC FOOT

ASSEMBLY MANUAL

28K

REF. NO. PART NO. QTY. DESCRIPTION REF. NO. PART NO. QTY. DESCRIPTION

1 5-1 1Body half - Right 16 5-16A 1Hitch bracket 2 5-2 1 Body half - Left 17 5-17 1 Axle 3 5-3 1 Front gate 18 5-18 2 HDPE spac er 4 5-4 2 Corner 19 5-19 4 Axle washer 5 5-5 1 Rear support bar 21 5-21 2 Wheel 7 5-7A 1 Gate retainer - Right 23 5-23N 46 5/16"-18 keps nut 8 5-8A 1 Gate retainer - Left 25 5- 25 46 5/16"-18 x 3/4" pan head

9 5-9A 1 Front Support 28 5-28 1 3/8"-16 x 3/4" hex head 11 5-11 1 Axle Holder 28K 5-28K 2 3/8"-16 keps nut 12 5-12A 1 Drawbar 30 5-30 1 Hitc h pin 13 5-13A 1 Latch post bar 31 5-31 3 Hair pin cott er 14 5-14A 1 Latch bolt 33 5-33 1 Tail gat e 15 5-15A 1 Latch spring 34 5-34 1 Assembly manual

REV-G

CAUTION: READ AND FOLLOW ALL SAFETY RULES

Ohio Steel Industries Columbus, OH 43224 U.S.A.

Visit our website: www.ohiosteel.com AND INSTRUCTIONS BEFORE USING THIS EQUIPMENT

For missing parts or questions

Call 1-800-652-2321

FULL TWO-YEAR WARRANTY

If this product fails due to a defect in material or workmanship within two years from the date of purchase, Ohio Steel will at its option repair or replace it free of charge. This warranty excludes Tires and Wheels which are expendable and become worn during normal use.

Proof of purchase required

This warranty does not cover:

· Repairs necessary because of operator abuse or negligence.

· Equipment use for commercial or rental purposes.

Contact Ohio Steel to arrange for product repair, or return this product to place of purchase for replacement.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This Warranty applies only while this product is in use in the United States.

TOOLS REQUIRED

Large blade screwdriver. 1/2" wrench and/or socket. Pliers.

SAFETY INSTRUCTION

Do not carry passengers in cart.• Do not tow cart on public roads.• Never exceed LOAD CAPACITY of 1000lbs.• Avoid sudden turns or maneuvers.• When operating on slopes, use lowest •

ground speed and limit load to 200lbs.

Operate up and down slopes, never •

across the face.

MAINTENANCE

Check tire pressure regularly, 30psi.• Periodically check all bolts.• Keep cart clean to prevent rust.• Store inside a clean dry area.•

CARTON CONTENTS

REF. NO. QTY. DESCRIPTION

1 1 Body half - Right 2 1 Body half - Left 3 1 Front gate 4 2 Corner 5 1 Rear support bar 7 1 Tail gate retainer - Right 8 1 Tail gate retainer - Left

9 1 Front support 11 1 Axle holder 12 1 Drawbar assembly 17 1 Axle 21 2 Wheel 33 1 Tail gate 34 1 Assembly manual

BB 1 Hardware bag

Step3. Loosely attach front gate and corners. Square assembly and tighten all bolts.

Hair Pin

Axle Washer

Axle Spacer

Axle Washer

Hair Pin

Step 4. Center axle through axle holder & drawbar. Place washer, spacer, wheel, washer onto axle. Lock in place with hair pin cotter.

Step1. Loosely assemble body halves as shown.

Axle Washer

Axle Spacer

Step 5. Attach rear support bar and gate retainers. Insert tail gate and tighten bolts. Insert hitch pin and secure with hairpin cotter.

Step2. Loosely attach front support and axle holder.

Hitch Pin

Hair Pin