Ohaus V12P3, V12P30, V12P6, V12P15 User Manual
Valor
1000 Series
Instruction Manual
TM
ValorTM 1000 Series EN-1
Table of Contents
1. INTRODUCTION .................................................................................................. 2
1.1 Safety Information ........................................................................................ 2
1.2 Intended Use ............................................................................................... 3
1.2 Controls ....................................................................................................... 4
1.3 Display ......................................................................................................... 4
2. INSTALLATION .................................................................................................... 5
2.1 Location ....................................................................................................... 5
2.2 Power .......................................................................................................... 5
2.3 Rechargeable Battery Power ....................................................................... 5
2.4 Initial Calibration .......................................................................................... 6
3. OPERATION ......................................................................................................... 6
3.1 Turning Scale On/Off ................................................................................... 6
3.2 Weighing ...................................................................................................... 6
4. SETTINGS ............................................................................................................ 7
4.1 Calibration Menu .......................................................................................... 7
4.2 Setup Menu ................................................................................................. 8
5. LEGAL FOR TRADE........................................................................................... 10
5.1 Settings ...................................................................................................... 10
5.2 Verification ................................................................................................. 10
5.3 Sealing ....................................................................................................... 10
6. MAINTENANCE .................................................................................................. 12
6.1 Cleaning .................................................................................................... 12
6.2 Troubleshooting ......................................................................................... 12
6.3 Service Information .................................................................................... 13
7. TECHNICAL DATA ............................................................................................. 13
7.1 Specifications............................................................................................. 14
7.2 Compliance ................................................................................................ 17
EN-2 ValorTM 1000 Series
WARNING
For a hazardous situation with medium risk, possibly resulting in severe
injuries or death if not avoided.
CAUTION
For a hazardous situation with low risk, resulting in damage to the device
or the property or in loss of data, or minor or medium injuries if not
avoided.
ATTENTION
For important information about the product. May lead to equipment
damage if not avoided.
NOTE
For useful information about the product.
General
hazard
Explosion
hazard
Electrical
shock hazard
1. INTRODUCTION
This manual contains installation, operation and maintenance instructions for the
Ohaus ValorTM 1000 Series Scales. Please read the manual completely before
using the scale.
1.1 Safety Information
Definition of Signal Warnings and Symbols
Safety notes are marked with signal words and warning symbols. These show
safety issues and warnings. Ignoring the safety notes may lead to personal injury,
damage to the instrument, malfunctions and false results.
Warning Symbols
Safety Precautions
CAUTION: Read all safety warnings before installing, making
connections, or servicing this equipment. Failure to comply with these
warnings could result in personal injury and/or property damage. Retain
all instructions for future reference.
Before connecting power, verify that the AC adapter’s input voltage
range and plug type are Ð compatible with the local AC mains power
supply.
Do not position the equipment such that it is difficult to reach the
power connection.
Make sure that the power cord does not pose a potential obstacle or
tripping hazard.
Operate the equipment only under ambient conditions specified in
these instructions.
The equipment is for indoor use only.
Do not operate the equipment in wet, hazardous or unstable
environments.
Do not allow liquids to enter the equipment.
ValorTM 1000 Series EN-3
Do not load the equipment above it's rated capacity.
Do not drop loads on the platform.
Do not place the equipment upside down on the platform.
Use only approved accessories and peripherals.
Disconnect the equipment from the power supply when cleaning.
Service should only be performed by authorized personnel.
WARNING: Never work in an environment subject to explosion hazards!
The housing of the instrument is not gas tight. (Explosion hazard due to
spark formation, corrosion caused by the ingress of gases).
CAUTION: Battery is to be replaced only by an authorized Ohaus service
dealer. Risk of explosion can occur if the rechargeable battery is
replaced with the wrong type or if it is not properly connected. Dispose of
the rechargeable battery according to local laws and regulations.
1.2 Intended Use
This instrument is intended for use in businesses and light industry. It shall only be
used for measuring the parameters described in these operating instructions. Any
other type of use and operation beyond the limits of technical specifications, without
written consent from OHAUS, is considered as not intended. This instrument
complies with current industry standards and the recognized safety regulations;
however, it can constitute a hazard in use.
If the instrument is not used according to these operating instructions, the intended
protection provided by the instrument may be impaired.
EN-4 ValorTM 1000 Series
Button
Functions
Press (when off): Turns the scale on
Short Press (when on): Sets display to zero
Long Press (when on): Turns the scale off
Press (in Menu): Confirm（Enter）
Short Press: Enters / clears a Tare value
Long Press: Enters User Menu
Press (in Menu): Changes menu selections (Forward)
Item
Description
1
Battery charge symbol
2
Center of Zero symbol
3
Negative symbol
4
Stable weight symbol
5
NET symbol
1
2
3
4
5
1.3 Controls
Notes:
Short Press: Press less than 3 seconds.
Long Press: Press and hold for more than 3 seconds.
1.4 Display
ValorTM 1000 Series EN-5
Level Bubble
4 x Leveling Feet
2. INSTALLATION
2.1 Location
Use the scale on a firm, steady surface. Avoid locations with excessive air current,
vibrations, heat sources, or rapid temperature changes. Adjust the leveling feet so
the bubble is centered in the circle.
Figure 2-1. Leveling the Scale.
2.2 Power
Connect the AC Adaptor to the AC mains supply. Connect the plug to the DC jack
on the bottom of the scale. The scale may be operated on the AC Adapter
connected to mains supply or 4 alkaline batteries.
Note: The AC adapter maybe optional or included with the scale, depending on the
region.
2.3 Rechargeable Battery Power
Allow the battery to charge for 12 hours before using the scale on battery power.
The instrument can be operated during charging, and the battery is protected
against overcharging. For maximum operating time, the battery should be charged
at room temperature.
Note: Availability is depending on region as accessory.
WARNING: Only charge the battery when the ambient temperature is between 0
and 140 °F / 0 and 40 °C.
Loading...