Ohaus AS 142 User Manual

Ohaus Corporation
29 Hanover Road Florham Park NJ 07932-0900
MODEL AS142 Impact Printer
Instruction Manual
NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY
WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERAT­ED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. HOWEVER, THERE IS NO GUARANTEE THAT INTERFERENCE WILL NOT OCCUR IN A PARTICULAR INSTALLATION. IF THIS EQUIPMENT DOES CAUSE HARMFUL INTERFERENCE TO RADIO OR TELEVISION RECEPTION, WHICH CAN BE DETERMINED BY TURNING THE EQUIPMENT OFF AND ON, THE USER IS ENCOURAGED TO TRY TO CORRECT THE INTERFER­ENCE BY ONE OR MORE OF THE FOLLOWING MEASURES:
-REORIENT OR RELOCATE THE RECEIVING ANTENNA.
-INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVER.
-CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH THE RECEIVER IS CONNECTED.
-CONSULT THE DEALER OR AN EXPERIENCED RADIO/TV TECHNICIAN FOR HELP.
Unauthorized changes or modifications to this equipment are not permitted.
2
TABLE OF CONTENTSTABLE OF CONTENTS

TABLE OF CONTENTS

TABLE OF CONTENTSTABLE OF CONTENTS
INTRODUCTION .................................................................................................. 4
DESCRIPTION ..................................................................................................... 4
UNPACKING ........................................................................................................ 5
INSTALLATION .................................................................................................... 5
Environment .................................................................................................. 5
Controls ......................................................................................................... 5
OPERATION
Indicators and Switches Operation ............................................................... 6
Self-Test Mode .......................................................................................... 6
On/Off Mode .............................................................................................. 6
Baud rate Selection ....................................................................................... 7
Parity Selection ............................................................................................ 7
Serial Interface Connection ........................................................................... 8
Ribbon Cassette Loading .............................................................................. 8
Loading Paper ............................................................................................. 11
CARE AND MAINTENANCE.............................................................................. 13
SERVICE INFORMATION ................................................................................. 14
SPECIFICATIONS ............................................................................................. 14
PARTS INFORMATION ..................................................................................... 14
REPLACEMENT PARTS ................................................................................... 15
ACCESSORIES ................................................................................................. 15
LIMITED WARRANTY........................................................................................ 15
3

INTRODUCTION

This manual covers installation and operation for the Ohaus Model AS142 lmpact Printer. To insure proper operation of the printer, please read this manual completely.
DESCRIPTIONDESCRIPTION

DESCRIPTION

DESCRIPTIONDESCRIPTION
The Ohaus Model AS142 Impact Printer, is a dot-matrix microprinter which can interface directly to various Ohaus Balances which contain an RS232 lnterface connector. The printer can be used with Ohaus Balances Models AP, AS, GT, TP, TS, CT, MB200, I5, I10, I20W, Explorer and Voyager. The printer interface is serial, RS232 compatible. Internal DIP switches can be set to baud rates from 150 to 9600. Additional internal switches are used to set parity and handshaking. There are two LED lamps, Power and SEL indicators, and two push button switches, SEL select on/ off line and LF line feed switch. The printer utilizes an impact dot matrix head in a 5 x 7 format with 42 characters per line, and can print one line per second. Ribbon life is 10,000 lines. Printing paper width is 2.25 “/5.7cm. Power is supplied through an AC Adapter which is included and provides 9 volts dc, 1 A to the printer.
4
UNPACKINGUNPACKING

UNPACKING

UNPACKINGUNPACKING
Your AS142 was shipped with the following items:
AC power adapter
Instruction manual
A paper roll and a ribbon are loaded inside the printer before packing.
It is recommended to save the carton and packing material for storing, transporting the balance or returning it for service.
INSTALLATIONINSTALLATION

INSTALLATION

INSTALLATIONINSTALLATION
EnvironmentEnvironment

Environment

EnvironmentEnvironment
The printer should always be used in an environment which is free from corrosives, vibration, and temperature or humidity extremes.
ControlsControls

Controls

ControlsControls
The controls, indicators and connectors of the model AS142 impact printer are shown in the illustration below.
CAUTION:CAUTION:
CAUTION:
CAUTION:CAUTION:
5
Loading...
+ 11 hidden pages