Page 1
Printing for
Professionals
Océ
VarioLink 9522
User’s Guide
POD Administrator’s
Reference
Page 2
Page 3
VarioLink 9522
POD Administrator’s Reference
User’s Guide
Page 4
Page 5
Contents
1 Introduction
1.1 Composition of User’s Guide .......................................................... 1-4
1.2 Outline of Machine Status Screen Settings ................................... 1-6
1.3 Outline of Utility Menu Settings ....................................................... 1-9
1.4 Outline of Browser Settings ........................................................... 1-11
1.4.1 Web Utilities ................................................................................. 1-11
1.4.2 Web Connection .......................................................................... 1-12
2 Paper Setting
2.1 Paper Setting Outlines ..................................................................... 2-3
2.1.1 Setting Items in Paper Setting ....................................................... 2-3
2.1.2 Paper Type Specifications ............................................................. 2-5
2.2 Registering Paper Type/Weight ...................................................... 2-8
2.3 Deleting Paper Type/Weight .......................................................... 2-12
2.4 Specifying Paper Size and Conditions for a Tray ........................ 2-14
2.5 Changing Paper Type/Weight Already Specified for a Tray ....... 2-19
2.6 Changing Paper Size Detected for Post Inserter Trays .............. 2-24
2.7 Registering/Deleting Custom Sizes .............................................. 2-26
2.7.1 Registering/Editing Custom Sizes ............................................... 2-26
2.7.2 Deleting Registered Custom Sizes .............................................. 2-28
3 Adjustment
3.1 Function Overview ............................................................................ 3-3
3.2 01 Finisher Adjustment .................................................................... 3-7
3.2.1 01 Fold & Staple Stopper Adjustment ........................................... 3-7
3.2.2 02 Half Fold Stopper Adjustment ................................................... 3-9
3.2.3 03 Trimming Stopper Adjustment ................................................ 3-11
3.2.4 04 Hole-Punch Position Adjustment - 01 Punch Kit Vert. Pos.
Adj. ............................................................................................... 3-13
3.2.5 04 Hole-Punch Position Adjustment - 02 Punch Kit Horiz. Pos.
3.2.6 04 Hole-Punch Position Adjustment - 03 Punch Unit Vert. Pos.
VarioLink 9522 x-3
Adj. ............................................................................................... 3-15
Adj. ............................................................................................... 3-17
Page 6
3.2.7 04 Hole-Punch Position Adjustment - 04 Punch Unit Horiz. Pos.
3.2.8 05 Z-Fold Position Adjustment - 01 First Fold Adjustment ..........3-21
3.2.9 05 Z-Fold Position Adjustment - 02 Second Fold Adjustment .....3-23
3.2.10 06 Tri-Fold Position Adjustment ...................................................3-25
3.2.11 07 Staple Finisher Pitch Adjustment (Finisher FS-611 only) .........3-27
3.2.12 08 Fold & Staple Pitch Adjustment ...............................................3-29
3.3 02 Timing Adjustment .....................................................................3-31
3.3.1 01 Printer S1 Restart Timing Adjustment .....................................3-31
3.3.2 02 Printer S2 Restart Timing Adjustment .....................................3-33
3.3.3 03 Printer Registration Loop Adjustment ......................................3-35
3.3.4 04 Printer Pre-registration Adjustment .........................................3-37
3.3.5 05 Printer Lead Edge Margin Adjustment .....................................3-39
3.3.6 07 Scanner Restart Timing Adjustment ........................................3-41
3.3.7 08 ADF Restart Timing Adjustment ..............................................3-43
3.3.8 09 ADF Registration Loop Adjustment .........................................3-45
3.4 03 Centering Adjustment ................................................................3-47
3.4.1 01 Printer Centering Adjustment ..................................................3-47
3.4.2 02 Scanner Centering Adjustment ................................................3-49
3.4.3 03 ADF Centering Adjustment ......................................................3-51
Adj. ................................................................................................3-19
4 Controller Setting
4.1 Function Overview .............................................................................4-3
4.1.1 List of the Controller Setting ...........................................................4-3
4.2 01 Report Type ...................................................................................4-9
4.3 02 Printer Setting .............................................................................4-10
4.4 03 Select Printer Setting .................................................................4-16
4.5 04 Spool Print Jobs in HDD before RIP .........................................4-17
4.6 05 I/F Timeout ..................................................................................4-18
4.7 06 Plug-in Form Password .............................................................4-19
4.8 07 Scan Setting ................................................................................4-20
4.9 08 Administrator Setting .................................................................4-22
x-4 VarioLink 9522
Page 7
5 Settings on Utility Menu Screen
5.1 Outlines of Settings on Utility Menu Screen .................................. 5-3
5.1.1 How to Access the Utility Menu Screen ........................................ 5-3
5.1.2 List of Utility Menu Settings ........................................................... 5-6
5.2 01 System Setting ........................................................................... 5-12
5.2.1 01 Language Setting .................................................................... 5-12
5.2.2 02 Unit Setting ............................................................................. 5-13
5.2.3 03 Buzzer Setting - 01 Buzzer On/Off, Volume Set ..................... 5-14
5.2.4 03 Buzzer Setting - 02 Buzzer for Job Stop Set .......................... 5-15
5.2.5 04 1 Shot Indication Time ............................................................ 5-16
5.2.6 05 Default Screen Setting ............................................................ 5-17
5.2.7 06 Auto Reset Setting .................................................................. 5-18
5.2.8 07 Key Response Time ................................................................ 5-19
5.2.9 08 Change User Password .......................................................... 5-20
5.2.10 09 Function Key Setting ............................................................... 5-21
5.3 02 Function Setting ......................................................................... 5-23
5.3.1 01 Feed Tray Setting - 01 Feed Tray Auto Selection ................... 5-23
5.3.2 01 Feed Tray Setting - 02 ATS Permit ......................................... 5-25
5.3.3 01 Feed Tray Setting - 03 Auto Paper Type ................................ 5-26
5.3.4 02 Individual Function Change Setting ........................................ 5-27
5.3.5 03 Density Setting - 01 Density by Original Type ........................ 5-29
5.3.6 03 Density Setting - 02 Preset Density Setting ............................ 5-30
5.3.7 03 Density Setting - 03 Photo Mode Density Selection ............... 5-31
5.3.8 03 Density Setting - 04 Image Density Selection ......................... 5-32
5.3.9 04 User Preset Zoom Setting ....................................................... 5-33
5.3.10 05 Tandem Setting ....................................................................... 5-34
5.3.11 06 User Paper Selection .............................................................. 5-38
5.4 03 Copy Setting ............................................................................... 5-39
5.4.1 01 Reset Setting - 01 Initial Setting ............................................. 5-39
5.4.2 01 Reset Setting - 02 Reset Function Setting .............................. 5-42
5.4.3 01 Reset Setting - 03 Initial by Key Counter Insert ...................... 5-43
5.4.4 02 Individual Function Change Setting ........................................ 5-44
VarioLink 9522 x-5
Page 8
5.5 04 Scan Setting ................................................................................5-47
5.5.1 01 Default Destination Setting ......................................................5-47
5.5.2 02 Individual Function Change Setting .........................................5-49
5.6 05 Touch Panel Adjustment ............................................................5-52
6 Administrator Setting
6.1 Administrator Setting Outlines .........................................................6-3
6.1.1 How to access the Administrator Setting Menu Screen .................6-3
6.1.2 List of the Administrator Setting .....................................................6-5
6.2 01 System Setting ............................................................................6-11
6.2.1 01 Power Save Setting .................................................................6-11
6.2.2 02 Time and Date Setting .............................................................6-13
6.2.3 03 Weekly Timer Setting ...............................................................6-15
6.2.4 03 Weekly Timer Setting - 01 Weekly Timer On/Off Setting .........6-15
6.2.5 03 Weekly Timer Setting - 02 Timer Reserve Setting ...................6-17
6.2.6 03 Weekly Timer Setting - 03 Timer Action On/Off Set ................6-19
6.2.7 03 Weekly Timer Setting - 04 Lunch Hour Off Setting ..................6-21
6.2.8 03 Weekly Timer Setting - 05 Timer Interrupt Password ..............6-22
6.2.9 04 Management List Print .............................................................6-23
6.2.10 05 Restrict User Access Setting ...................................................6-26
6.2.11 06 Expert Adjustment - 01 Original Scan Area Setting .................6-29
6.2.12 06 Expert Adjustment - 02 ADF Frame Erase Setting ..................6-30
6.2.13 06 Expert Adjustment - 03 Non-Image Area Erase Setting ..........6-31
6.2.14 07 Size Setting ..............................................................................6-32
6.2.15 08 Annotation Setting ...................................................................6-33
6.3 02 Admin./Machine Setting ............................................................6-40
6.3.1 01 Register Administrator .............................................................6-40
6.4 03 User Auth./ Account Track ........................................................6-42
6.4.1 01 Authentication Method - 01 Authentication Setting ................6-45
6.4.2 01 Authentication Method - 02 Account Track Setting ................6-48
6.4.3 02 Account Track ..........................................................................6-50
6.4.4 03 User Authentication Setting .....................................................6-56
6.4.5 04 Non Registered User/Output Setting .......................................6-64
x-6 VarioLink 9522
Page 9
6.5 04 Network Setting ......................................................................... 6-65
6.5.1 01 Machine NIC Setting - 01 TCP/IP Setting ............................... 6-65
6.5.2 02 Controller NIC Setting ............................................................. 6-67
6.5.3 List of IP NIC Setting .................................................................... 6-68
6.6 05 Copy/Printer Setting .................................................................. 6-83
6.6.1 01 Job Offset Operating ............................................................... 6-83
6.6.2 02 Continuation Print (Printer) ...................................................... 6-84
6.6.3 03 Page No. Position (Booklet) .................................................... 6-85
6.6.4 04 Fixing Prerotation Setting ....................................................... 6-86
6.6.5 05 Automatic Image Rotation Setting .......................................... 6-87
6.6.6 06 Interruption Suspend Setting .................................................. 6-88
6.6.7 07 Copy Reserve Operation ......................................................... 6-89
6.6.8 08 Scan Stop by Pulling Out Tray ................................................ 6-90
6.6.9 09 Continuation Print (Copy) ........................................................ 6-91
6.6.10 10 Original Glass SDF Method ..................................................... 6-92
6.6.11 11 SDF Auto Setting .................................................................... 6-93
6.7 06 System Connection ................................................................... 6-94
6.7.1 01 User Call .................................................................................. 6-94
6.8 07 Security Setting .......................................................................... 6-95
6.8.1 01 Administrator Password .......................................................... 6-95
6.8.2 02 HDD Management Setting - 01 Folder/User Box List
6.8.3 02 HDD Management Setting - 02 HDD Data Auto Delete
6.8.4 02 HDD Management Setting - 03 Change HDD Lock
6.8.5 02 HDD Management Setting - 04 Delete Temporary Data ...... 6-102
6.8.6 02 HDD Management Setting - 05 Delete All Data .................... 6-103
6.8.7 03 Security Strengthen Mode .................................................... 6-103
6.9 08 Scan Destination Register ...................................................... 6-106
6.9.1 01 Destination Address Edit/Delete ........................................... 6-106
Delete ........................................................................................... 6-97
Period ........................................................................................... 6-99
Password ................................................................................... 6-100
VarioLink 9522 x-7
Page 10
7 Web Utilities Setting
7.1 Web Utilities Outlines ........................................................................7-3
7.2 Setting Account Track Data .............................................................7-5
7.2.1 Adding Account Track ....................................................................7-5
7.2.2 Editing Account Track Data ............................................................7-8
7.3 Remote Panel Setting/Job History Setting ...................................7-16
7.4 Setting Scan Transmission Function .............................................7-20
7.5 Transmitting Machine Setting File .................................................7-26
7.6 Box Edit ............................................................................................7-34
7.7 Displaying Job History ....................................................................7-39
7.7.1 Turning On/Off Job History ...........................................................7-39
7.7.2 Displaying Job History List ...........................................................7-41
8 Web Connection Setting
8.1 Web Connection Outlines .................................................................8-3
8.1.1 System Requirements .....................................................................8-3
8.1.2 Web Browser Settings ....................................................................8-4
8.2 Access ................................................................................................8-5
8.3 Configuration of Administrator Mode Screen .................................8-7
8.4 Maintenance Tab ...............................................................................8-9
8.4.1 Meter Count ....................................................................................8-9
8.4.2 ROM Version .................................................................................8-10
8.4.3 Import/Export ................................................................................8-10
8.4.4 Status Notification Setting ............................................................8-11
8.4.5 Machine Setting ............................................................................8-13
8.4.6 Online Assistance .........................................................................8-14
8.4.7 Reset - Network Setting Clear ......................................................8-15
8.5 Security Tab .....................................................................................8-16
8.5.1 Authentication ...............................................................................8-16
8.5.2 User Registration ..........................................................................8-17
8.5.3 Account Track Registration ..........................................................8-19
8.5.4 SSL/TLS Setting - SSL/TLS Setting .............................................8-21
8.5.5 SSL/TLS Setting - Action for Invalid Certificate ............................8-27
8.5.6 Auto Logout ..................................................................................8-28
8.5.7 Administrator Password Setting ...................................................8-29
x-8 VarioLink 9522
Page 11
8.6 Box Tab ............................................................................................ 8-30
8.7 Print Setting Tab ............................................................................. 8-31
8.7.1 Default Setting ............................................................................. 8-31
8.7.2 Job Spool Setting ........................................................................ 8-34
8.7.3 Interface Setting ........................................................................... 8-35
8.7.4 Select Printer Setting ................................................................... 8-36
8.8 Scan Tab .......................................................................................... 8-37
8.8.1 Subject ......................................................................................... 8-37
8.8.2 Text .............................................................................................. 8-38
8.8.3 Scanner Setting ............................................................................ 8-40
8.9 Network Tab .................................................................................... 8-41
8.9.1 TCP/IP Setting - TCP/IP Setting .................................................. 8-41
8.9.2 TCP/IP Setting - IP Filtering ......................................................... 8-42
8.9.3 TCP/IP Setting - IPsec Setting ..................................................... 8-43
8.9.4 Time Adjustment Setting .............................................................. 8-46
8.9.5 E-mail RX (POP) ........................................................................... 8-46
8.9.6 E-mail TX (SMTP) ......................................................................... 8-47
8.9.7 LDAP Setting - LDAP Setting ....................................................... 8-48
8.9.8 LDAP Setting - Setting Up LDAP ................................................. 8-48
8.9.9 IPP Setting ................................................................................... 8-51
8.9.10 FTP Setting - FTP Send Setting ................................................... 8-52
8.9.11 FTP Setting - FTP Server Setting ................................................. 8-53
8.9.12 SNMP Setting .............................................................................. 8-54
8.9.13 SMB Setting - WINS Setting ........................................................ 8-54
8.9.14 SMB Setting - Client Setting ........................................................ 8-55
8.9.15 SMB Setting - Print Setting .......................................................... 8-56
8.9.16 Web Service Setting - Web Service Setting ................................ 8-57
8.9.17 Web Service Setting - Print Setting ............................................. 8-58
8.9.18 Web Service Setting - Scanner Settings ...................................... 8-59
8.9.19 Bonjour Setting ............................................................................ 8-60
8.9.20 NetWare Setting - NetWare Setting ............................................. 8-61
8.9.21 NetWare Setting - NetWare Status .............................................. 8-62
8.9.22 AppleTalk Setting ......................................................................... 8-62
8.9.23 OpenAPI Setting .......................................................................... 8-63
VarioLink 9522 x-9
Page 12
8.9.24 TCP Socket Setting ......................................................................8-64
8.9.25 JSP Setting ...................................................................................8-65
9 Appendix
9.1 How to Input Characters ..................................................................9-3
9.2 Importable/Exportable Setting Data - Devices ...............................9-5
9.3 Importable/Exportable Setting Data - Counters ...........................9-12
9.4 Importable/Exportable Setting Data - Authentication .................9-13
9.5 Demo Page .......................................................................................9-14
9.6 PCL Font List ...................................................................................9-22
9.7 Glossary ............................................................................................9-25
10 Index
x-10 VarioLink 9522
Page 13
1
Introduction
Page 14
Page 15
Introduction
1 Introduction
This section describes the overview of this document.
FEDERAL OR STATE STATUES MAY PROHIBIT THE COPYING OF
CERTAIN DOCUMENTS OR INFORMATION, RESULTING IN FINIES OR
IMPRISONMENT FOR VIOLATORS.
ACKNOWLEDGEMENTS
- Microsoft, MS, Windows and MS-DOS are registered trademarks or
trademarks of Microsoft Corporation in the United States and / or other
countries.
- IBM is a registered trademarks of the IBM Corporation.
- Macintosh and PowerMac are registered trademarks or trademarks of
Apple Computer, Inc. in the United States and / or other countries.
- Adobe, Adobe Logo, Acrobat, Acrobat Logo, PostScript and PostScript
Logo are registered trademarks or trademarks of Adobe Systems, Inc.
®
- RC4
- Other company names and product names used in this manual are the
is a registered trademark or trademark of RSA Security Inc. in the
United States and/or other countries.
registered trademarks or trademarks of their respective companies.
1
Copyright © 2009 GoAhead Software, Inc. All rights reserved.
EXEMPTION
- No part of this manual may be used or duplicated without permission.
- Manufacturer and Sales Company will have no liability for any influences
caused by using the printing system and this User’s Guide.
- The information written in this User’s Guide is subject to change without
prior notice.
VarioLink 9522 1-3
Page 16
1
1.1 Composition of User’s Guide
This machine is provided with the following user guides.
User’s Guide - Copier
This guide describes an outline of the machine and copy operations.
Please refer to this guide for safety information, turning on/off the machine,
paper supply, dealing with machine trouble such as paper jam, and copy
operation available on the machine.
User’s Guide - POD Administrator's Reference <This book>
This guide provides you with detailed information about the machine
management and how to customize the machine according to your daily use.
Please refer to this guide for a setup and management of the machine
including registration of copy paper, tray setting, and a network setup.
User’s Guide - Network Scanner
This guide describes the operation of the network scanner function equipped
for the machine as standard.
Please refer to this guide for full information on reading data or storing data
(Scan to HDD, Scan to E-mail, Scan to FTP, Scan to SMB).
Introduction
User’s Guide - Security
This guide describes the security functions.
Please refer to this guide for how to use the Enhanced Security mode, and
for detailed machine operation in Enhanced Security mode.
Trademarks/Copyrights
This guide describes trademarks, licenses, and copyrights concerning this
machine.
Be sure to read this guide before using the machine.
User’s Guide - Printer
This guide describes the operation of the printer function equipped for the
machine.
Please refer to this guide for how to use PCL driver, Adobe PS driver and
Web Connection in user mode.
1-4 VarioLink 9522
Page 17
Introduction
User’s Guide - Printer (PostScript3 Plug-in Driver)
This guide describes the operation of the printer function equipped for the
machine.
Please refer to this guide for how to use Plug-in driver in user mode.
To operate safely, be sure to read "Section 1: Precautions for Installation and
Use" in User’s Guide - Copier before using the machine.
1
VarioLink 9522 1-5
Page 18
1
1.2 Outline of Machine Status Screen Settings
The [Paper Setting], [Custom Size Reg.], [Adjustment], and [Controller] keys
are located at the bottom of the Machine Status Screen to display each
setting screen.
[Paper Setting] key: Displays the Paper Setting Screen.
Introduction
Make settings for each paper source tray by using predefined options.
This operation is also available by touching [Paper Setting] on the Copy
Screen; however, accessed from the Machine Status Screen, this screen
provides additional functions such as registering/deleting paper type/weight
entries and changing detectable sizes for upper and lower trays of the optional post inserter.
After completing the settings, touch [Close] to exit the Paper Setting mode.
1-6 VarioLink 9522
Page 19
Introduction
[Custom Size Reg.] key: Displays the Custom Size Regist Screen.
Use this function to register frequently used custom sizes to be recalled in
Size Setting.
After completing the settings, touch [Close] to exit the Custom Size Regist
mode.
[Adjustment] key: Displays the Adjustment Menu Screen.
1
Make adjustments concerning image control and finishing options.
After completing the adjustments, touch [Exit] to exit the Adjustment mode.
VarioLink 9522 1-7
Page 20
1
Introduction
[Controller] key: Displays the Controller Setting Menu Screen.
Make settings concerning an optional print controller.
After completing the settings, touch the [MACHINE] tab to return to the
Machine Status Screen.
1-8 VarioLink 9522
Page 21
Introduction
1.3 Outline of Utility Menu Settings
Press the [Utility/Counter] key on
the control panel to display the
Utility Menu Screen.
1
The Utility Menu Screen includes two types of setting items: user settings
and administrator settings. User settings are available to any user, while administrator settings are supposed to be performed by an administrator, requiring a unique password to access the setting menu.
2
Note
The administrator settings are initially accessible to the general user.
It is recommended to create an administrator who will be the sole person
to control the administrator settings. Please contact your service
representative to set up an administrator password.
Section 5 includes information on setting items available from the Utility
Menu Screen except the administrator settings.
Section 6 provides information on setting items available from the
Administrator Setting Menu Screen.
VarioLink 9522 1-9
Page 22
1
Introduction
[Exit] on the Utility Menu Screen
Touch [Exit] to exit the Utility mode and resume the screen displayed before
pressing [Utility/Counter] on the control panel.
Items available to be forbidden
The following menu items can be forbidden from the Utility Menu Screen.
Contact your service representative, if desired.
- Utility Menu - 05 Touch Panel Adjustment
- Utility Menu - 01 System Setting - 05 Default Screen Setting - Job List
2
Note
The setting to forbid the Job List Screen to be default is available only on
the machine with optional RC-501 mounted.
1-10 VarioLink 9522
Page 23
Introduction
1.4 Outline of Browser Settings
When the machine is connected with a PC over a local network, machine and
image controller settings are available using the web browser installed on the
PC.
1.4.1 Web Utilities
When the machine is connected with a PC over a network, the web browser
activated on the PC provides the following functions.
1. Account Track Setting
Make the account track settings of the administrator setting using the
web browser on a PC.
2. Remote Panel/ Remote Monitor/ Multi Monitor
Control/monitor the current state of the machine using the web browser
on a PC.
3. Scan Transmission Setting
Register the address for the transmission of the scanned image data
using the web browser.
4. Setting Data Import/Export
Transmit the setting data from the machine to a PC (export) using the web
browser, then return the data to the machine (import).
5. Box Edit
Change the name of the box or file created in the HDD, or display the
thumbnail of the top page of the file, using the web browser on a PC.
6. Job History List
Display the job history list of the machine using the web browser on a PC.
For details, see Section 7: Web Utilities Setting.
1
VarioLink 9522 1-11
Page 24
1
1.4.2 Web Connection
Web Connection is a device control utility program provided by the HTTP
server built into the image controller of the VarioLink 9522.
This utility can be used with a web browser to display the status of the
VarioLink 9522 printer, scanner and network, and to change default and
network settings.
For details, see Section 8: Web Connection Setting.
Introduction
1-12 VarioLink 9522
Page 25
2
Paper Setting
Page 26
Page 27
Paper Setting
2 Paper Setting
2.1 Paper Setting Outlines
This machine provides the optimum print result according to each characteristics of copy paper by specifying paper name, size, type, weight, both sides
adjustment, chart adjustment, punch, and color.
Paper Setting accessed from the Machine Status Screen
The paper conditions described above can be programed in advance, and
those programed properties can also be changed or deleted.
Paper Setting accessed from the Machine Status Screen and Copy
Screen
The programed settings can be recalled to each tray, and also can be altered
as required. The altered setting can be newly registered for future use.
This section describes each paper condition to be specified and setting procedure started from the Machine Status Screen.
2.1.1 Setting Items in Paper Setting
2
Paper Type
Select one of the following five types.
Fine, Plain, Embossed, User, Blank Insert
Name
Up to 12 alphanumeric characters can be used.
Weight
Select one of the following eleven options.
11-13 lb, 14-16 lb, 17-19 lb, 20-21 lb, 22-24 lb, 25-28 lb, 29-35 lb, 36-43 lb,
44-57 lb, 58-65 lb, 66-80 lb
!
Detail
See page 2-5 for details of paper type specifications and relation between paper type and weight.
VarioLink 9522 2-3
Page 28
2
Paper Setting
Both Sides Adjust
Specify the Vertical zoom, Horizontal zoom, Up/Down shift amount, and
Right/Left shift amount for both front and back pages.
Vertical: –9% to +9% (in 0.05% increments)
Horizontal: –9% to +9% (in 0.1% increments)
Up/Down: –99mm to +99mm (in 0.1 mm increments)
Right/Left: –99mm to +99mm (in 0.1 mm increments)
2
Note
We recommend you performing this adjustment every day or every time
the tray is loaded with different type of paper, because the coefficient of
contraction varies according to the paper type, brand, or the difference
in temperature and humidity of paper repository.
Chart Adjustment
Perform the Both Sides Adjustment by outputting a chart.
Setting range: 0.0–99.9
Paper Size
Select one of the following four types as paper size.
- Standard
- Custom
- Wide Paper
- Tab Paper (Standard/Custom)
Colored Paper
Select one of the following six types.
White, Transparent, Yellow, Pink, Blue, Green
Hole-Punch
Select either condition.
Pre-Punched or No Hole-Punch
2-4 VarioLink 9522
Page 29
Paper Setting
2.1.2 Paper Type Specifications
The following five paper types are provided according to the plainness of paper, etc.
Fine
The fine paper is non-coated paper generally used for offset printing. The fine
paper has a high degree of whiteness and used for various purposes.
Plain
The plain paper is used for copying in general and is called “PPC paper”. The
plain paper is usually not recycled paper; however, select [Plain] for the tray
in which recycled paper is loaded.
Embossed
The embossed paper has a non-smooth surface on which toner is hard to be
fixed. Fine paper types such as book paper and cotton paper are included in
this category.
Blank Insert
The Blank Insert is not a category of paper type. This is for the paper only to
be fed without being printed. When With Cover/Blank or Blank mode of Insert
Sheet, or Blank mode of OHP interleave is used, select [Blank Insert] for the
tray in which paper only to be fed is loaded.
2
User
When a paper type other than those can be specified on this machine is
used, select [User]. For details, contact your service representative.
VarioLink 9522 2-5
Page 30
2
(inch)
g
Paper Setting
Paper Weight Conversion Chart
Paper type
Basic size
/m
40.0 10.6 14.8 22.2 18.2 24.6 27.0
50.0 13.3 18.5 27.7 22.8 30.8 33.8
52.3 13.9 19.4 29.0 23.9 32.2 35.4
54.2 14.4 20.1 30.0 24.7 33.3 36.7
60.2 16.0 22.3 33.3 27.5 37.0 40.7
64.0 17.0 23.7 35.4 29.2 39.4 43.3
66.3 17.7 24.6 36.7 30.3 40.8 44.9
68.7 18.3 25.4 38.0 31.4 42.3 46.5
72.3 19.3 26.8 40.0 33.0 44.5 48.9
75.9 20.2 28.1 42.0 34.7 46.7 51.3
80.0 21.3 29.6 44.3 36.5 49.2 54.1
83.7 22.3 31.0 46.4 38.2 51.5 56.6
88.0 23.4 32.6 48.7 40.2 54.1 59.5
90.0 24.0 33.3 49.8 41.1 55.4 60.9
98.3 26.2 36.4 54.4 44.9 60.5 66.5
100.0 26.6 37.0 55.4 45.7 61.5 67.6
104.7 27.9 38.8 58.0 47.8 64.4 70.8
108.0 28.8 40.0 59.8 49.3 66.4 73.1
110.0 29.3 40.7 60.9 50.2 67.7 74.4
120.0 32.0 44.4 66.5 54.8 73.8 81.2
127.9 34.1 47.4 70.8 58.4 78.7 86.5
130.0 34.6 48.1 72.0 59.4 80.0 87.9
140.0 37.3 51.8 77.5 63.9 86.1 94.7
150.0 39.9 55.5 83.1 68.5 92.3 101.5
160.0 42.6 59.2 88.6 73.1 98.4 108.2
170.0 45.3 62.9 94.2 77.6 104.6 115.0
180.0 47.9 66.7 99.7 82.2 110.7 121.8
190.0 50.6 70.4 105.2 86.8 116.9 128.5
200.0 53.3 74.1 110.8 91.3 123.1 135.3
210.0 55.9 77.8 116.3 95.9 129.2 142.1
220.0 58.6 81.5 121.8 100.5 135.4 148.8
230.0 61.3 85.2 127.4 105.0 141.5 155.6
240.0 63.9 88.9 132.9 109.6 147.7 162.4
250.0 66.6 92.6 138.5 114.2 153.8 169.1
260.0 69.2 96.3 144.0 118.7 160.0 175.9
270.0 71.9 100.0 149.5 123.3 166.1 182.7
280.0 74.6 103.7 155.1 127.9 172.3 189.4
290.0 77.2 107.4 160.6 132.4 178.4 196.2
300.0 79.9 111.1 166.1 137.0 184.6 202.9
Bond
17x22
432x559
2
Cover
20x26
508x660
lb lb lb lb lb lb
Index
25.5x30.5
648x775
Bristol
22.5x28.5
572x724
Tag
24x36
610x914
Book
25x38
635x965
2-6 VarioLink 9522
Page 31
Paper Setting
2
2
Note
The Help Screen provides the paper weight conversion table.
Press [Help] on the control panel to display the Help Screen and find it
from the Top Menu, if desired.
VarioLink 9522 2-7
Page 32
2
2.2 Registering Paper Type/Weight
Follow the procedure below to register the paper type/weight according to
the paper to be used.
2
Note
Paper size setting is not included in this procedure.
Procedure
1 Touch [Paper Setting] on the Machine Status Screen, then touch [Reg-
ister Type/Weight].
Paper Setting
2 Touch the key to be registered.
The Input Condition Screen will be displayed.
2-8 VarioLink 9522
Page 33
Paper Setting
3 Touch [Paper Type] to select the paper type.
4 Touch [Name] to enter the desired name for the paper to be used.
2
– Touch [OK] to complete the setting and return to the Input Condi-
tion menu.
– The same name as the paper type specified in step 3 is currently
displayed in the text field. To change it, enter a new name and
touch [OK].
– For details on entering texts, see the appendix of this guide.
VarioLink 9522 2-9
Page 34
2
Paper Setting
5 Similarly, touch [Weight], [Colored Paper], and [Hole-Punch] to specify
each condition of the paper to be used.
2-10 VarioLink 9522
Page 35
Paper Setting
6 Touch [Both Sides Adj.] to make adjustments on Zoom and Image Shift
2
functions for both sides of paper, if desired.
– Touch [Front Side] or [Back Side] to select the printed side, then se-
lect an adjustment item from [Vertical], [Horizontal], [Up/Down], and
[Right/Left].
– Use [+<->-] to specify the adjustment value to be positive or nega-
tive.
– Use the touch panel keypad or arrow keys (+/,) to enter the de-
sired value.
7 Touch [OK] repeatedly to complete the setting, then touch [Close] on
the Paper Setting Screen.
The Machine Status Screen will be restored.
!
Detail
For available setting range of the Both Size Adjustment, see page 2-4.
Chart Adjustment is not available when programing paper conditions. For
details of this adjustment, see page 2-4.
VarioLink 9522 2-11
Page 36
2
2.3 Deleting Paper Type/Weight
Follow the procedure below to delete a paper type/weight previously registered.
Procedure
1 Touch [Paper Setting] on the Machine Status Screen, then touch [De-
lete Type/Weight].
2 Use [Next] or [Previous] to scroll to the desired entry on the list, touch
the key to highlight it, then touch [OK].
Paper Setting
A popup screen will appear to confirm that the selected entry is to be
deleted.
2-12 VarioLink 9522
Page 37
Paper Setting
3 Touch [Yes] to delete it, or touch [No] to cancel.
4 Touch [OK] to complete the setting.
5 Touch [Close].
2
– If more than one entry is to be deleted, repeat steps 2 and 3.
The Machine Status Screen will be restored.
VarioLink 9522 2-13
Page 38
2
Paper Setting
2.4 Specifying Paper Size and Conditions for a Tray
Select a paper size and programmed paper type/weight for each tray.
2
Reminder
When setting a wide paper size, be sure to specify actual dimensions of
the paper to be used. The dimensions of wide sizes provided on the
screen are not precisely specified in the initial setting.
Procedure
1 Touch [Paper Setting] on the Machine Status Screen, then touch [Tray
Setting].
2 Touch the tray key to be specified, then touch [Size Setting].
The Size Setting Screen will be displayed.
2-14 VarioLink 9522
Page 39
Paper Setting
3 To set a standard size, touch [Standard] to highlight it.
2
– If the selected tray is to be loaded with one of the following sizes,
touch [Detect Size Setting] to specify the desired size from the
screen: 5.5 × 8.5 v, 8.5 × 11 w, 8 × 13 w, 8.12 × 13.2 w, 8.25 × 13 w,
8.5 × 13 w, SRA4 w, 9 × 11 v.
If 5.5 × 8.5 is selected on the Detect Size Setting Screen, the machine will automatically detect 5.5 × 8.5 v instead of A5 v. Similarly,
8.5 × 11 w will be detected instead of A4 w, 8 × 13 w,
8.12 × 13.2 w, 8.25 × 13 w, 8.5 × 13 w, and SRA4 w instead of
8.5 × 14 w, and 9 × 11 v instead of 8.5 × 11 v.
– Touch [OK] to complete the setting, then proceed to step 7.
4 To set a custom size, touch [Custom] to highlight it, then specify its di-
mensions.
– Use the vertical/horizontal size key and touch panel keypad, or ar-
row keys (+/,) to enter the dimensions. From the minimum size of
140 × 182 mm to the maximum size of 314 × 445 mm can be entered.
VarioLink 9522 2-15
Page 40
2
Paper Setting
– To use a custom size previously registered, touch [Size Recall].
Scroll to the desired entry on the list, touch its number key to highlight it, then touch [OK].
– Touch [Lead Edge], [Rear Edge], or [Center] to specify the desired
image position.
– Touch [OK] to complete the setting, then proceed to step 7.
5 To set a wide size, touch [Wide Paper] to highlight it, then select the de-
sired wide size and specify its dimensions.
– Touch the desired wide size key to highlight it, then touch [Size In-
put]. Use the vertical/horizontal size key and touch panel keypad,
or arrow keys (+/,) to enter the dimensions of selected wide size.
The entered number should fall within the range from the vertical/horizontal size of the standard size corresponding to the selected wide size, to a maximum of 314 × 445 mm.
– Touch [Lead Edge], [Rear Edge], or [Center] to specify the desired
image position.
– Touch [OK] to complete the setting, then proceed to step 7.
2-16 VarioLink 9522
Page 41
Paper Setting
6 To set a tabbed paper size, touch [Tab Paper] to highlight it, then select
2
the desired size or specify the dimensions of custom size.
– Touch the desired tabbed paper size key to highlight it.
– If a custom tabbed paper size is desired, touch [Custom Size]. Use
the vertical/horizontal/index size key and touch panel keypad, or arrow keys (+/,) to enter the dimensions.
– Touch [Number of Tabs] to specify the number of tabs. Setting
range is from 1 to 15.
– Touch [OK] to complete the setting, then proceed to step 7.
VarioLink 9522 2-17
Page 42
2
Paper Setting
7 To set a paper type/weight, touch [Type/Weight] to display the
Type/Weight Screen.
– Use [Next] or [Previous] to scroll to the desired entry on the list,
touch the key to highlight it, then touch [OK].
8 Touch [Close] repeatedly to return to the Machine Status Screen.
!
Detail
The minimum size provided in Custom size setting can be changed as
desired. For details, contact your service representative.
2-18 VarioLink 9522
Page 43
Paper Setting
2
2.5 Changing Paper Type/Weight Already Specified for a Tray
To make a partial change of Paper Type/Weight already specified for a tray,
follow the procedure below. The modified setting can be registered as a new
entry of Paper Type/Weight list.
2
Note
Both Sides Adjustment is required every time the paper type is changed
or as a daily maintenance, because a shrinkage ratio varies depending
upon the paper type, paper brand, and temperature and/or humidity of
storage location.
Procedure
1 Touch [Paper Setting] on the Machine Status Screen, then touch [Tray
Setting].
VarioLink 9522 2-19
Page 44
2
Paper Setting
2 Touch the tray key to be changed, then touch [Change Setting].
3 Touch the key of the setting item to be changed, then change the cur-
rent selection as desired.
– To change the setting, follow the same procedure as registering the
paper conditions. See page 2-9 to page 2-11.
2-20 VarioLink 9522
Page 45
Paper Setting
4 Touch [Both Sides Adj.], then output a chart for setting an adjustment
2
value.
– Touch [Front Side]/[Back Side] to select the printed side, then touch
[Chart Adjustment].
Touch [Print Mode] to display the Copy Screen, then press [Start]
on the control panel to output a chart.
– With the front side selected, use a scale to measure each point,
then enter the value from the screen keypad.
Measurement point: (1) to (8)
Adjustment range: 0.0–300.0, 1 step = 0.1 mm
VarioLink 9522 2-21
Page 46
2
Paper Setting
– With the back side selected, measure the positional gap between
the front side and back side.
Measurement point: (1) to (4)
Adjustment range: X (horizontal) –99.9 (left) to +99.9 (right), Y (vertical) –99.9 (top) to +99.9 (bottom), 1 step = 0.1 mm
– To start the adjustment, touch [Adjustment Start].
Repeat this procedure till the desired result is obtained.
5 Touch [OK] repeatedly to complete the setting and restore the Tray
Setting Screen.
6 To newly register the modified setting, touch [Register].
– To simply change the setting, touch [Close] repeatedly to return to
the Machine Status Screen.
2-22 VarioLink 9522
Page 47
Paper Setting
7 Touch the desired key to be registered, enter the desired name, then
8 Touch [Close] repeatedly to return to the Machine Status Screen.
2
touch [OK] repeatedly to complete the registration.
– If selected key has already been named, that name will be dis-
played in the text field. Delete it and enter a new name, if desired.
– For details on entering texts, see the appendix of this guide.
VarioLink 9522 2-23
Page 48
2
Paper Setting
2.6 Changing Paper Size Detected for Post Inserter Trays
Use this function to change the paper size to be detected for the post inserter.
- PI (Upper) Detect Size
If 5.5 × 8.5 v is selected, the machine will automatically detect 5.5 × 8.5 v
instead of A5 v.
Similarly, 8.5 × 11 w can be detected instead of A4 w, an d 9 × 11 v in-
stead of 8.5 × 11 v.
- PI (Lower) Detect Size
If 5.5 × 8.5 v is selected on the Detect Size Setting Screen, the machine
will automatically detect 5 .5 × 8.5 v instead of A5 v.
Similarly, 8.5 × 11 w can be detected instead of A4 w, 9 × 11 v instead of
8.5 × 11 v, and 8 × 13 w, 8.12 × 13.2 w, 8.25 × 13 w, 8.5 × 13 w, and
SRA4 w instead of 8.5 × 14 w.
Procedure
1 Touch [Paper Setting] on the Machine Status Screen.
2 Touch [PI (Upper) Detect Size] or [PI (Lower) Detect Size].
2-24 VarioLink 9522
Page 49
Paper Setting
3 Touch the desired paper size keys to highlight them.
4 Touch [OK] to complete the setting, or touch [Cancel] to resume the
5 Touch [Close].
2
previous setting.
The Machine Status Screen will be restored.
VarioLink 9522 2-25
Page 50
2
2.7 Registering/Deleting Custom Sizes
Follow the procedure below to register/delete custom paper sizes.
2
Note
A custom size specified for a tray in Size Setting of Paper Setting cannot
be registered as in this procedure.
2.7.1 Registering/Editing Custom Sizes
Procedure
1 Touch [Custom Size Reg.] on the Machine Status Screen.
Paper Setting
The Custom Size Regist Screen will be displayed.
2 Touch the number key to be registered, then touch [Add/Edit].
2-26 VarioLink 9522
Page 51
Paper Setting
3 Specify the dimensions of the custom size.
2
The Custom Size Setting Screen will be displayed.
– Use the vertical/horizontal size key and touch panel keypad, or ar-
row keys (+/,) to enter the dimensions. From the minimum size of
100 × 140 mm to the maximum size of 314 × 460 mm can be entered.
– Touch [Lead Edge], [Rear Edge], or [Center] to specify the desired
image position
4 Touch [Set].
The Name Input Screen will be displayed.
5 Enter the desired name, then touch [OK].
6 When setting is completed, touch [Close].
The Machine Status Screen will be restored.
VarioLink 9522 2-27
Page 52
2
2.7.2 Deleting Registered Custom Sizes
Procedure
1 Touch [Custom Size Reg.] on the Machine Status Screen.
The Custom Size Regist Screen will be displayed.
2 Touch the number key to be deleted, then touch [Delete].
Paper Setting
A popup screen will appear to confirm that the selected entry is to be
deleted.
2-28 VarioLink 9522
Page 53
Paper Setting
3 Touch [Yes] to delete it, or touch [No] to cancel.
4 When setting is completed, touch [Close].
2
The Machine Status Screen will be restored.
VarioLink 9522 2-29
Page 54
Page 55
3
Adjustment
Page 56
Page 57
Adjustment
3 Adjustment
3.1 Function Overview
This section describes various adjustments for finishing options and image
control functions available from the Adjustment Menu Screen.
Touch [Adjustment] on the Machine Status Screen to display the Adjustment
Menu Screen.
3
The menu comprises the following adjustments.
Menu item and description Available range
01 Finisher Adjustment
01 Fold & Staple Stopper Adj.
Adjust the dislocation of the center position of staples
processed by Finisher FS-611.
02 Half Fold Stopper Adj.
Adjust the dislocation of the half-fold position processed
by Finisher FS-611.
A3 w, B4 w, A4 w, SRA4 w,
11 × 17 w, 8.5 × 14 w, 8.5 ×
11 w, 8K w, 11 × 17W w,
A3W w, B4W w, A4W w, 8.5
× 11W w, Custom
–128 (wide) to +127 (narrow),
= 0.1mm
1 step
A3 w, B4 w, A4 w, SRA4 w,
11 × 17 w, 8.5 × 14 w, 8.5 ×
11 w, 8K w, 11 × 17W w,
A3W w, B4W w, A4W w, 8.5
× 11W w, Custom
–128 (wide) to +127 (narrow),
= 0.1 mm
1 step
VarioLink 9522 3-3
Page 58
3
Menu item and description Available range
03 Trimming Stopper Adj.
Adjust the trimming stopper position processed by Trimmer Unit TU-502.
04 Hole-Punch Position Adj.
01 Punch Kit Vert. Pos. Adj.
Adjust the vertical position holes processed by Punch
Kit PK-505.
02 Punch Kit Horiz. Pos. Adj.
Adjust the horizontal position holes processed by
Punch Kit PK-505.
03 Punch Unit Vert. Pos. Adj.
Adjust the vertical position of punch hole processed
by Z-fold Unit ZU-607.
04 Punch Unit Horiz. Pos. Adj.
Adjust the horizontal position of punch hole processed by Z-fold Unit ZU-607.
05 Z-Fold Position Adj.
Adjust the dislocation of the z-fold position processed by
Z-Fold Unit ZU-607.
01 First Fold Adjustment
02 Second Fold Adjustment
A3 w, B4 w, A4 w, SRA4 w,
11 × 17 w, 8.5 × 14 w, 8.5 ×
11 w, 8K w, 11 × 17W w,
A3W w, B4W w, A4W w, 8.5
× 11W w, Custom
–128 (wide) to +127 (narrow),
1 step
= 0.1 mm
A3 w, B4 w, A4 w, SRA4 w,
11 × 17 w, 8.5 × 14 w, 8.5 ×
11 w, B5 w, 9 × 11 v, 8.5 ×
11 v, 5.5 × 8.5 w, A4 v, A5
w, B5 v, A5 v, 5.5 × 8.5 v,
8.12 × 13.2 w, 8 × 13 w, 8.25
× 13 w, 8.5 × 13 w, 8K w,
16K v
–50 (wide) to +50 (narrow),
1 step = 0.1 mm
Main Feed, PI Feed
–50 (wide) to +50 (narrow),
1 step = 0.1 mm
A3 w, B4 w, A4 w, SRA4 w,
11 × 17 w, 8.5 × 14 w, 8.5 ×
11 w, B5 w, 9 × 11 v, 8.5 ×
11 v, 5.5 × 8.5 w, A4 v, A5
w, B5 v, A5 v, 5.5 × 8.5 v,
8.12 × 13.2 w, 8 × 13 w, 8.25
× 13 w, 8.5 × 13 w, 8K w,
16K v
–50 (wide) to +50 (narrow),
1 step = 0.1 mm
Main Feed only
–50 (wide) to +50 (narrow),
1 step = 0.1 mm
A3 w, B4 w, 11 × 17 w, 8.5 ×
14 w, 8K w
–128 (wide) to +127 (narrow),
= 0.1 mm
1 step
A3 w, B4 w, 11 × 17 w, 8.5 ×
14 w, 8K w
–128 (wide) to +127 (narrow),
= 0.1 mm
1 step
Adjustment
3-4 VarioLink 9522
Page 59
Adjustment
Menu item and description Available range
06 Tri-Fold Position Adj.
Adjust the dislocation of the trifold position processed by
Finisher FS-611.
07 Staple Finisher Pitch Adj.
Adjust the pitch of two staples in stapled sets processed
by Finisher FS-528/FS-611
08 Fold & Staple Pitch Adj.
Adjust the staple pitch of folded and stapled sets processed by Finisher FS-611.
02 Timing Adjustment
01 Printer S1 Restart Timing
Adjust the restart timing for the Side 1 (right side).
02 Printer S2 Restart Timing
Adjust the restart timing for the Side 2 (reverse side).
03 Printer Registration Loop
Adjust the amount of registered loop based on a paper
feed tray.
04 Printer Pre-registration
Adjust the amount to pre-register based on a paper feed
tray.
05 Printer Lead Edge Margin
Adjust the amount of image erase from the edge of paper. –20 (wide) to +40 (narrow),
07 Scanner Restart Timing Adj.
Adjust the restart timing in scanning the original from the
original glass.
08 ADF Restart Timing Adj.
Adjust the restart timing in scanning the original from the
ADF.
09 ADF Registration Loop Adj.
Adjust the amount of registered loop in scanning the original from the ADF.
A4 w, 8.5 × 11 w
–128 (wide) to +127 (narrow),
1 step
= 0.1 mm
128 (wide) to 160 (narrow),
1 step = 1 mm
128 (wide) to 160 (narrow),
1 step = 1 mm
General, Tray 1 Offset, Tray 2
Offset, Tray 3 Offset, Tray 4
Offset, Bypass Offset
–30 (short) to +30 (long),
1 step = 0.1 mm
Tray 1 Offset, Tray 2 Offset,
Tray 3 Offset, Tray 4 Offset,
Bypass Offset
–30 (short) to +30 (long),
1 step = 0.1 mm
–5 (wide) to +5 (narrow),
1 step = 2 ms for TrayS1 and
TrayS1 Thick
–10 (wide) to +10 (narrow),
1 step = 2 ms for BypassS1,
S2 460, BypassS1 Thick, and
S2 Thick 460
–10 (wide) to +10 (narrow),
1 step = 4 ms for S2 290 and
S2 Thick 290
Tray 1, Tray 2, Tray 3, Tray 4
–5 (wide) to +5 (narrow), 1
= 2 ms
step
1 step = 0.1 mm
–40 (fast) to +40 (slow),
1 step = 0.1 mm
Side 1, Side2
–50 (fast) to +50 (slow),
1 step = 0.1 mm
Side 1, Side2
–10 (short) to +10 (long),
1 step = 0.5 mm
3
VarioLink 9522 3-5
Page 60
3
Menu item and description Available range
03 Centering Adjustment
01 Printer Centering Adj.
Adjust the printed image position to the direction of paper
feed.
02 Scanner Centering Adj.
Adjust the position of the image scanned from the original
glass.
03 ADF Centering Adj.
Adjust the position of the image scanned from the ADF. Side 1: Small, Side 2: Small
–64 (forward) to +63 (backward), 1 step = 0.1 mm
–30 (forward) to +30 (backward), 1 step = 0.1 mm
Side 1: Large, Side 2: Large
–30 (forward) to +30 (backward), 1 step = 0.1 mm
Adjustment
3-6 VarioLink 9522
Page 61
Adjustment
3.2 01 Finisher Adjustment
3.2.1 01 Fold & Staple Stopper Adjustment
Adjust the dislocation of staple positions in widthwise direction of paper using Fold & Staple mode operated by the Finisher FS-611.
[02 Half Fold Stopper Adj.] is supposed to be completed before this adjustment.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [01 Finisher Adjustment] and [01 Fold & Staple Stopper Adj.].
The Fold & Staple Stopper Adjustment Screen will be displayed.
3 Touch [Next] or [Back] to select the paper size to be adjusted.
3
4 Touch [COPY] tab to display the Copy Screen.
5 Load the desired size of paper to be adjusted on a tray, and select the
tray key.
6 Press [Start] on the control panel.
A sample pattern will be output.
VarioLink 9522 3-7
Page 62
3
Adjustment
7 Check the misalignment center fold and position of staples on output
sheets.
Allowance: a=0 ± 1 mm
a
8 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Fold & Staple Stopper Adjustment Screen will be restored.
9 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -128 (upward) to +127 (downward), 1 step = 0.1 mm
10 Repeat the adjustment steps from 3 to 9 until the desired result is
obtained.
11 Touch [Return] to restore the Adjustment Menu Screen.
3-8 VarioLink 9522
Page 63
Adjustment
3.2.2 02 Half Fold Stopper Adjustment
Perform this adjustment for the double-folding position processed by the
Finisher FS-611.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [01 Finisher Adjustment] and [02 Half Fold Stopper Adj.].
The Half Fold Stopper Adjustment Screen will be displayed.
3 Touch [Next] or [Back] to select the paper size to be adjusted.
3
4 Touch [COPY] tab to display the Copy Screen.
5 Load the desired size of paper to be adjusted on a tray, and select the
tray key.
6 Press [Start] on the control panel.
A sample pattern will be output.
VarioLink 9522 3-9
Page 64
3
Adjustment
7 Check the misalignment (a) of the edge of the feeding sheets.
Allowance: a=0 ± 1 mm
a
8 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Half Fold Stopper Adjustment Screen will be restored.
9 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -128 to +127, 1 step = 0.1 mm
10 Repeat the adjustment steps from 3 to 9 until the desired result is
obtained.
11 Touch [Return] to restore the Adjustment Menu Screen.
3-10 VarioLink 9522
Page 65
Adjustment
3.2.3 03 Trimming Stopper Adjustment
Perform this adjustment for the trimmed width by the Trimmer Unit TU-502.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [01 Finisher Adjustment], and [03 Trimming Stopper Adj.].
The Trimming Stopper Adjustment Screen will be displayed.
3 Touch [Next] or [Back] to select the paper size to be adjusted.
3
4 Touch [COPY] tab to display the Copy Screen.
5 Load the desired size of paper to be adjusted on a tray, and select the
tray key.
6 Press [Start] on the control panel.
A sample pattern will be output.
VarioLink 9522 3-11
Page 66
3
Adjustment
7 Check the trimmed width (a) from the edge of the feeding sheet.
Allowance: 2 mm more over
a
8 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Trimming Stopper Adjustment Screen will be restored.
9 Touch [+ <--> -] to specify the value to be positive or negative.
Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: -128 (narrow) to +127 (wide), 1 step = 0.1 mm
10 Repeat the adjustment steps from 3 to 9 until the desired result is ob-
tained.
11 Touch [Return] to restore the Adjustment Menu Screen.
2
Note
Enter the value so that the cover should be cut more than 2.0 mm.
3-12 VarioLink 9522
Page 67
Adjustment
3.2.4 04 Hole-Punch Position Adjustment - 01 Punch Kit Vert. Pos. Adj.
Perform this adjustment for the center position of punch holes operated by
the Punch Kit PK-505.
2
Reminder
If the machine is installed with Z Folding Unit ZU-607, this adjustment is
unavailable using paper fed from the main body trays. Load paper into
the lower tray of the post inserter, then press the Start/Stop button to
output the sample pattern.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [01 Finisher Adjustment], [04 Hole-Punch Position Adj.], and
then [01 Punch Kit Vert. Pos. Adj.].
The Punch Kit Vertical Position Adjustment Screen is displayed.
3 Touch [Next] or [Back] to select the paper size to be adjusted.
3
4 Touch [COPY] tab to display the Copy Screen.
5 Load the desired size of paper to be adjusted on a tray, and select the
tray key.
If the machine is installed with Z Folding Unit ZU-607, load the paper
size to be adjusted into the lower tray of the post inserter.
VarioLink 9522 3-13
Page 68
3
Adjustment
6 Press [Start] on the control panel.
A sample pattern will be output.
For the machine with Z Folding Unit ZU-607 installed, press the
Start/Stop button of the post inserter. In this case, the sample pattern
will not be printed.
7 Check the value of misalignment (a) between the center-fold line and
punch position.
Allowance: a=0 ± 2 mm
(1) Center of paper
(2) Center of punch position
[1]
a
[2]
8 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Punch Kit Vertical Position Adjustment Screen will be restored.
9 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -50 (forward) to +50 (backward), 1 step = 0.1 mm
10 Repeat the adjustment steps from 3 to 9 until the desired result is
obtained.
11 Touch [Return] to restore the Adjustment Menu Screen.
3-14 VarioLink 9522
Page 69
Adjustment
3.2.5 04 Hole-Punch Position Adjustment - 02 Punch Kit Horiz. Pos. Adj.
Perform this adjustment for the position of punch holes in the feeding
direction operated by the Punch Kit PK-505.
2
Reminder
If the machine is installed with Z Folding Unit ZU-607, this adjustment is
unavailable using paper fed from the main body trays. Be sure to select
"PI Feed" on the Punch Kit Horizontal Position Adjustment Screen.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [01 Finisher Adjustment], [04 Hole-Punch Position Adj.], and
then [02 Punch Kit Horiz. Pos. Adj.].
The Punch Kit Horizontal Position Adjustment Screen is displayed.
3 Touch [Next] or [Back] to select Main Feed or PI Feed.
If the machine is installed with Z Folding Unit ZU-607, be sure to select
PI Feed.
3
4 Touch [COPY] tab to display the Copy Screen.
5 To adjust the main body tray, load the paper on the desired main body
tray, then press [Start] on the control panel.
To adjust the post inserter tray, load the paper in the lower tray of the
post inserter, then press the Start/Stop button.
A sample pattern will be output.
VarioLink 9522 3-15
Page 70
3
Adjustment
6 Check the distance (a) from the edge of the output sheet to the center
of the punch hole.
Allowance: a=10.5 ± 5.0 mm
a
7 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Punch Kit Horizontal Position Adjustment Screen will be restored.
8 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -50 (narrow) to +50 (wide), 1 step = 0.1 mm
9 Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
10 Touch [Return] to restore the Adjustment Menu Screen.
3-16 VarioLink 9522
Page 71
Adjustment
3.2.6 04 Hole-Punch Position Adjustment - 03 Punch Unit Vert. Pos. Adj.
Perform this adjustment for the center position of punch holes operated by
the Z-Fold Unit ZU-607.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [01 Finisher Adjustment], [04 Hole-Punch Position Adj.], and
then [03 Punch Unit Vert. Pos. Adj.].
The Punch Unit Vertical Position Adjustment Screen is displayed.
3 Touch [Next] or [Back] to select the paper size to be adjusted.
3
4 Touch [COPY] tab to display the Copy Screen.
5 Load the desired size of paper to be adjusted on a tray, and select the
tray key.
6 Press [Start] on the control panel.
A sample pattern will be output.
VarioLink 9522 3-17
Page 72
3
Adjustment
7 Check the value of misalignment (a) between the center-fold line and
punch position.
Allowance: a=0 ± 2 mm
(1) Center of paper
(2) Center of punch position
[1]
a
[2]
8 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Punch Unit Vertical Position Adjustment Screen will be restored.
9 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -50 (forward) to +50 (backward), 1 step = 0.1 mm
10 Repeat the adjustment steps from 3 to 9 until the desired result is
obtained.
11 Touch [Return] to restore the Adjustment Menu Screen.
3-18 VarioLink 9522
Page 73
Adjustment
3
3.2.7 04 Hole-Punch Position Adjustment - 04 Punch Unit Horiz. Pos. Adj.
Perform this adjustment for the position of punch holes in the feeding
direction operated by the Z-Fold Unit ZU-607.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [01 Finisher Adjustment], [04 Hole-Punch Position Adj.], and
then [04 Punch Unit Horiz. Pos. Adj.].
The Punch Unit Horizontal Position Adjustment Screen is displayed.
3 Touch [COPY] tab to display the Copy Screen.
4 Load the paper on the desired main body tray, then press [Start] on the
control panel.
A sample pattern will be output.
VarioLink 9522 3-19
Page 74
3
Adjustment
5 Check the distance (a) from the edge of the output sheet to the center
of the punch hole.
Allowance: a=10.5 ± 5.0 mm
a
6 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Punch Unit Horizontal Position Adjustment Screen will be restored.
7 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -50 (narrow) to +50 (wide), 1 step = 0.1 mm
8 Repeat the adjustment steps from 3 to 7 until the desired result is
obtained.
9 Touch [Return] to restore the Adjustment Menu Screen.
3-20 VarioLink 9522
Page 75
Adjustment
3.2.8 05 Z-Fold Position Adjustment - 01 First Fold Adjustment
Adjust the dislocation for the first folding position in Z-Fold mode processed
by the Z-Fold Unit ZU-607.
2
Reminder
When adjusting both First Fold and Second Fold, be sure to start with the
First Fold adjustment.
The baseline of First Fold is calculated from the edge of the sheet, while
that of Second Fold is calculated from the position of the first fold line,
therefore a distance (b) in step 7 will be altered by changing the position
of either First Fold or Second Fold.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [01 Finisher Adjustment], [05 Z-Fold Position Adj.], and then [01
First Fold Adjustment].
The First Fold Adjustment Screen will be displayed.
3
3 Touch [Next] or [Back] to select the paper size to be adjusted.
4 Touch [COPY] tab to display the Copy Screen.
5 Load the desired size of paper to be adjusted on a tray, and select the
tray key.
VarioLink 9522 3-21
Page 76
3
Adjustment
6 Press [Start] on the control panel.
A sample pattern will be output.
7 Check a distance (a) and distance (b) on the output sheet.
Allowance: a=3.5 ± 1.5 mm
b=209 mm or less (A3 w)
b=181 mm or less (B4 w)
[1]: First fold
[2]: Second fold
[2]
a
b
[1]
8 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The First Fold Adjustment Screen will be restored.
9 Touch [+ <--> -] to specify the value to be positive or negative.
Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: -128 (wide) to +127 (narrow), 1 step = 0.1 mm
10 Repeat the adjustment steps from 3 to 9 until the desired result is ob-
tained.
11 Touch [Return] to restore the Adjustment Menu Screen.
3-22 VarioLink 9522
Page 77
Adjustment
3.2.9 05 Z-Fold Position Adjustment - 02 Second Fold Adjustment
Adjust the dislocation for the second folding position in Z-Fold mode processed by the Z-Fold Unit ZU-607.
2
Reminder
When adjusting both First Fold and Second Fold, be sure to start with the
First Fold adjustment.
The baseline of First Fold is calculated from the edge of the sheet, while
that of Second Fold is calculated from the position of the first fold line,
therefore a distance (b) in step 7 will be altered by changing the position
of either First Fold or Second Fold.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [01 Finisher Adjustment], [05 Z-Fold Position Adj.], and then [02
Second Fold Adjustment].
The Second Fold Adjustment Screen will be displayed.
3
3 Touch [Next] or [Back] to select the paper size to be adjusted.
4 Touch [COPY] tab to display the Copy Screen.
5 Load the desired size of paper to be adjusted on a tray, and select the
tray key.
VarioLink 9522 3-23
Page 78
3
Adjustment
6 Press [Start] on the control panel.
A sample pattern will be output.
7 Check a distance (a) and distance (b) on the output sheet.
Allowance: a=3.5 ± 1.5 mm
b=209 mm or less (A3 w)
b=181 mm or less (B4 w)
[1]: First fold
[2]: Second fold
[2]
a
b
[1]
8 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Second Fold Adjustment Screen will be restored.
9 Touch [+ <--> -] to specify the value to be positive or negative.
Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: -128 (wide) to +127 (narrow), 1 step = 0.1 mm
10 Repeat the adjustment steps from 3 to 9 until the desired result is ob-
tained.
11 Touch [Return] to restore the Adjustment Menu Screen.
3-24 VarioLink 9522
Page 79
Adjustment
3.2.10 06 Tri-Fold Position Adjustment
Perform this adjustment for the first folding position of three-folding
processed by the Finisher FS-611.
The adjustment for the second folding position is not available.
If the adjustment is provided, contact your service representative.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [01 Finisher Adjustment], and then [06 Tri-Fold Position Adj.].
The Tri-Fold Position Adjustment Screen will be displayed.
3 Touch [Next] or [Back] to select 8.5" × 11" w or A4 w.
3
4 Touch [COPY] tab to display the Copy Screen.
5 Load the desired size of paper to be adjusted on a tray, and select tray
key.
6 Press [Start] on the control panel.
A sample pattern will be output.
VarioLink 9522 3-25
Page 80
3
Adjustment
7 Check the folding length (a) on the output sheet.
Allowance: a=93 ± 2 mm or less (A4 w)
a=86.4 ± 2 mm or less (8.5" × 11"w)
b=second folding
c
a
b
8 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Tri-Fold Adjustment Screen will be restored.
9 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -128 (wide) to +127 (narrow), 1 step = 0.1 mm
10 Repeat steps from 3 to 9 until the desired result is obtained.
11 Touch [Return] to restore the Adjustment Menu Screen.
3-26 VarioLink 9522
Page 81
Adjustment
3.2.11 07 Staple Finisher Pitch Adjustment (Finisher FS-611 only)
Perform this adjustment for the staple pitch in Staple modes.
2
Note
Not only the Finisher FS-611 but also FS-528 provides the 2 positions
stapling function, however, the staple pitch is fixed and cannot be adjusted for FS-528.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [01 Finisher Adjustment], and then [07 Staple Finisher Pitch
Adj.].
The Staple Finisher Pitch Adjustment Screen will be displayed.
3 Touch [COPY] tab to display the Copy Screen.
3
4 Load the desired size of paper to be adjusted on a tray and select the
tray key.
5 Press [Start] on the control panel.
A sample pattern will be output.
VarioLink 9522 3-27
Page 82
3
Adjustment
6 Check the length (a) of staple pitch.
Allowance: a=128 ± 6 mm
a
7 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Staple Finisher Pitch Adjustment Screen will be restored.
8 Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: 128 to 160, 1 step = 1 mm
9 Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
10 Touch [Return] to restore the Adjustment Menu Screen.
3-28 VarioLink 9522
Page 83
Adjustment
3.2.12 08 Fold & Staple Pitch Adjustment
Perform this adjustment for the staple pitch in Fold & Staple modes.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [01 Finisher Adjustment], and then [08 Fold & Staple Pitch Adj.].
The Fold & Staple Pitch Adjustment Screen will be displayed.
3 Touch [COPY] tab to display the Copy Screen.
3
4 Load the desired size of paper to be adjusted on a tray and select the
tray key.
5 Press [Start] on the control panel.
A sample pattern will be output.
VarioLink 9522 3-29
Page 84
3
Adjustment
6 Check the length (a) of staple pitch.
Allowance: a=128 ± 6 mm
a
7 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Fold & Staple Pitch Adjustment Screen will be restored.
8 Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: 128 to 160, 1 step = 1 mm
9 Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
10 Touch [Return] to restore the Adjustment Menu Screen.
3-30 VarioLink 9522
Page 85
Adjustment
3.3 02 Timing Adjustment
Use this function to perform the timing adjustments provided as follows.
3.3.1 01 Printer S1 Restart Timing Adjustment
Perform this adjustment to control the restart timing for Side 1.
This adjustment is actually made by changing the laser exposure time.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [02 Timing Adjustment], and then [01 Printer S1 Restart Timing].
The Printer S1 Restart Timing Adjustment Screen will be displayed.
3 Touch [Next] or [Back] to select the desired tray.
3
4 Touch [COPY] tab to display the Copy Screen.
5 Select 11" × 17" w paper.
6 Press [Start] on the control panel.
A sample pattern will be output.
VarioLink 9522 3-31
Page 86
3
Adjustment
7 Measure the resultant restart timing.
Allowance: a=25.4 ± 0.5 mm
a
8 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Printer S1 Restart Timing Adjustment Screen will be restored.
9 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -30 (narrow) to +30 (wide), 1 step = 0.1 mm
10 Repeat the adjustment steps from 3 to 9 until the desired result is
obtained.
11 Touch [Return] to restore the Adjustment Menu Screen.
3-32 VarioLink 9522
Page 87
Adjustment
3.3.2 02 Printer S2 Restart Timing Adjustment
Perform this adjustment to control the restart timing for Side 2.
This adjustment is actually made by changing the laser exposure time.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [02 Timing Adjustment], and then [02 Printer S2 Restart Timing].
The Printer S2 Restart Timing Adjustment Screen will be displayed.
3 Touch [Next] or [Back] to select the desired tray.
3
4 Touch [COPY] tab to display the Copy Screen.
5 Select 11" × 17" w paper.
6 Press [Start] on the control panel.
A sample pattern will be output.
VarioLink 9522 3-33
Page 88
3
Adjustment
7 Measure the resultant restart timing.
Allowance: a=25.4 ± 0.5 mm
a
8 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Printer S2 Restart Timing Adjustment Screen will be restored.
9 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -30 (wide) to +30 (narrow), 1 step = 0.1 mm
10 Repeat the adjustment steps from 3 to 9 until the desired result is
obtained.
11 Touch [Return] to restore the Adjustment Menu Screen.
3-34 VarioLink 9522
Page 89
Adjustment
3.3.3 03 Printer Registration Loop Adjustment
Perform this adjustment to ease the skew, crease, or misfeed of copy paper
in pre-registration part by changing the paper loop amount in pre-registration
roller.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [02 Timing Adjustment], and then [03 Printer Registration Loop].
The Printer Registration Loop Adjustment Screen will be displayed.
3 Touch [Next] or [Back] to select the desired item.
3
4 Touch [COPY] tab to display the Copy Screen.
5 Select 11" × 17" w paper.
6 Specify copy conditions according to the item selected in step 3, press
[Start] on the control panel.
A sample pattern will be output.
7 If the machine still has the same trouble, touch [ADJUSTMENT] tab.
The Printer Registration Loop Adjustment Screen will be restored.
VarioLink 9522 3-35
Page 90
3
Adjustment
8 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range for Tray S1/ Tray S1 Thick: -5 to +5, 1 step = 2 ms
Available range for Bypass S1/ S2460/ Bypass S1 Thick/ S2 Thick 460:
-10 to +10, 1 step = 2 ms
Available range for S2 290/ S2 Thick 290: -10 to +10, 1 step = 4 ms
9 Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
10 Touch [Return] to restore the Adjustment Menu Screen.
3-36 VarioLink 9522
Page 91
Adjustment
3.3.4 04 Printer Pre-registration Adjustment
Perform this adjustment to ease the skew, crease, or misfeed of copy paper
in pre-registration part by changing the paper loop amount in pre-registration
roller.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [02 Timing Adjustment], and then [04 Printer Pre-registration].
The Printer Pre-registration Adjustment Screen will be displayed.
3 Touch [Next] or [Back] to select the desired item.
3
4 Touch [COPY] tab to display the Copy Screen.
5 Load 11"x17" w paper into the tray selected in step 3, then select the
tray on the screen.
6 Press [Start] on the control panel.
A sample pattern will be output.
7 If the machine still has the same trouble, touch [ADJUSTMENT] tab.
The Printer Pre-registration Adjustment Screen will be restored.
VarioLink 9522 3-37
Page 92
3
Adjustment
8 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -5(fast) to +5(slow), 1 step = 2 ms
9 Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
10 Touch [Return] to restore the Adjustment Menu Screen.
3-38 VarioLink 9522
Page 93
Adjustment
3.3.5 05 Printer Lead Edge Margin Adjustment
Adjust the amount of image to be erased from the lead edge of the paper.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [02 Timing Adjustment], and then [05 Printer Lead Edge Margin].
The Printer Lead Edge Margin Adjustment Screen will be displayed.
3 Touch [COPY] tab to display the Copy Screen.
3
4 Select 11" × 17" w paper.
5 Press [Start] on the control panel.
A sample pattern will be output.
VarioLink 9522 3-39
Page 94
3
Adjustment
6 Measure the margin of printer lead edge (a).
Allowance: a=4 mm or less
a
7 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Printer Lead Edge Margin Adjustment Screen will be restored.
8 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -20 (narrow) to +40 (wide), 1 step = 0.1 mm
9 Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
10 Touch [Return] to restore the Adjustment Menu Screen.
3-40 VarioLink 9522
Page 95
Adjustment
3.3.6 07 Scanner Restart Timing Adjustment
Perform this adjustment to control the restart timing in scanning the original
with the original glass.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [02 Timing Adjustment], and then [07 Scanner Restart Timing].
The Scanner Restart Timing Adjustment Screen will be displayed.
3 Touch [COPY] tab to display the Copy Screen.
3
4 Select 11" × 17" w paper.
5 Place the original of which a misalignment can be easily monitored on
the original glass, then press [Start] on the control panel.
A sample pattern will be output.
6 Check the misalignment by comparing the original and output.
Allowance: a=0 ± 1.5 mm or less
7 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Scanner Restart Timing Adjustment Screen will be restored.
VarioLink 9522 3-41
Page 96
3
Adjustment
8 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -40 (fast) to +40 (slow), 1 step = 0.1 mm
9 Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
10 Touch [Return] to restore the Adjustment Menu Screen.
3-42 VarioLink 9522
Page 97
Adjustment
3.3.7 08 ADF Restart Timing Adjustment
Perform this adjustment to control the restart timing in scanning the original
with ADF.
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [02 Timing Adjustment], and then [08 ADF Restart Timing Adj.].
The ADF Restart Timing Adjustment Screen will be displayed.
3 Touch [Next] or [Back] to select the original size to be adjusted.
3
4 Touch [COPY] tab to display the Copy Screen.
5 Select 11" × 17" w paper.
6 Place the original of which a misalignment can be easily monitored in
ADF, then press [Start] on the control panel.
A sample pattern will be output.
7 Check the misalignment by comparing the original and output.
Allowance: a=0 ± 2 mm or less
8 If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The ADF Restart Timing Adjustment Screen will be restored.
VarioLink 9522 3-43
Page 98
3
Adjustment
9 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -50 (fast) to +50 (slow), 1 step = 0.1 mm
10 Repeat the adjustment steps from 3 to 9 until the desired result is
obtained.
11 Touch [Return] to restore the Adjustment Menu Screen.
3-44 VarioLink 9522
Page 99
Adjustment
3.3.8 09 ADF Registration Loop Adjustment
Procedure
1 Touch [Adjustment] on the Machine Status Screen.
The Adjustment Menu Screen will be displayed.
2 Touch [02 Timing Adjustment], and then [09 ADF Registration Loop
Adj.].
The ADF Registration Loop Adjustment Screen will be displayed.
3 Touch [Next] or [Back] to select original side to be adjusted.
3
4 Touch [COPY] tab to display the Copy Screen.
5 Select 11" × 17" w paper.
6 Place the original of which a misalignment can be easily monitored in
ADF, then press [Start] on the control panel.
A sample pattern will be output.
7 If the machine still has the same trouble, touch [ADJUSTMENT] tab.
The ADF Registration Loop Adjustment Screen will be restored.
8 Touch [+ <--> -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -10 (narrow) to +10 (wide), 1 step = 0.5 mm
VarioLink 9522 3-45
Page 100
3
Adjustment
9 Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
10 Touch [Return] to restore the Adjustment Menu Screen.
3-46 VarioLink 9522
Loading...