Oce TCS400 Specification

Océ TCS400 Color Copy, Print and Scan System
Productive color. Extremely easy.
Océ
TCS400 Specifications
Productive wide-format color is really easy. Easy printing. Easy copying. Easy job submission. Easy media handling. Easy operator panel. If you are a central print provider wanting higher productivity or a small to medium sized company wanting versatility then you should take a look at the Océ TCS400.
Océ TCS400 Print Engine
Technology • Multi printhead thermal ink jet Printheads • 10 semi-permanent printheads each
with 208 nozzles (4 › black, 2 › cyan, 2 › magenta, 2 › yellow)
Tr ue resolution • 600 › 600 dpi Minimum pen • .0032 inches thickness Calibration • Automatic printhead alignment
• Failing nozzle compensation
• Unattended printing in the overnight mode
Size of ink tanks • 400 ml Ink level monitoring • Ink level indication
• Out of ink signalling
Margins Leading and trailing strip: .2 inch
Left and right sides: .12 inch
Width detection Automatic Media types • Uncoated (17–24#)
• Coated (24#)
• Polyester films (3–4 mil)
• Alternate photo glossy (50#)
• Vellum (16–20#)
Media sources • 1, 2 or 3 front loadable rolls Media core size • 2" Maximum roll length • 300 feet Output delivery • Slide, front-accessible
• Copy receiving rack
Noise level • Less than 44 dB (A) standby
• Less than 65 dB (A) printing
Dimensions • 58" (h) › 77" (w) › 41" (d) Electrical • 100/120/230 Volt 50/60 Hz requirements Power consumption • EPA-sleepmode (printer only)* 38 W
• Standby 108 W
• Run 159 W Note: Printer and Océ Power Logic
®
controller excluding monitor
Weight • 364–397 lbs. Safety approvals • CE-compliance, TÜV-GS (IEC60950),
UL, Cul (according to standard CAN/CSA C22.2 No 60950), CB Compliance with EN 60950
Other • Energy Star
®
compliant
Océ TCS400 Scan unit
Technology Fully integrated RGB color scanning Cameras 3› Reduction type CCD Cameras Optical resolution 508 dpi Calibration • Automatic colour calibration based on
IT8.7-card
• Automatic camera alignment
• Automatic stitching control
Océ TCS400 specifications
Mechanical speed • Max 8 ips Scanning width • Max. 40" Original thickness • Max. 0.60 inch Original feed • Face down Original out • Rewind and hold
• Feed and release
• Feed and hold
Original delivery • Slide, front accessible
• Optional: original delivery rack at the back
Dimensions • 42" (h) › 53" (w) › 20" (d) Electrical • 100/120/230 Volt 50/60 Hz requirements Power consumption • Sleepmode: 45 W
• Stand-by: 135 W
• Run: 135W
Wa rm up time • From sleep mode: about 6 min.
• From cold start (timer controllable) about 6 min.
Weight • 232 lbs. Safety approvals • CE Compliance, TÜV-GS (IEC60950),
UL, CB compliance with EN60950, EMC Compliance
Océ Power Logic®Controller hardware
Platform • Océ controller with embedded
Windows XP
Memory • 512 MB, expandable to 1024 MB with copy
and scan-to-file modules
Hard disk capacity • 80 GB maximum Graphic User Interface • Optional: keyboard, mouse and monitor
(mandatory with scan-to-file module)
Power consumption • Controller < 75 W
• Monitor 200 W
Electrical • 120/230 V, 50/60 Hz requirements Standard interface • RJ45 Network • Ethernet 10/100baseT Network protocol • TCP/IP, IPX/SPX Printing protocol • LPR/LPD/LPQ/LPRM, Pserver (Novell)
3.x/4.x/5.x, FTP
Océ Power Logic Controller software
Core module
• File spooling on the controller
• Concurrent receiving/processing/ printing/copying/scanning
• Océ Setting Editor
• Océ System Control Panel
• Océ Advanced Queue Manager
Optional • Océ Account Logging
Print module
Print processing • Print Optimization Kernel technology Printer transfer curves • Standard inclusive ink reduction Color modes • B&W/Grayscale, Color Quality modes • Check, Release, Presentation Content modes • Text & Lines, Area fills Language sensing • Automatic Standard file formats • Vector: HPGL, HPGL/2, Calcomp
• Raster: HP-RTL, TIFF 6.0, CALS, C4, NIRS/NIFF
Optional • Adobe PS3/PDF-printing Number of prints • 1–999, send once, process once, print many Roll selection and • Manual, Automatic switching Plot manipulation • Rotation, auto-scaling, positioning
• Pen management
• Leading and trailing strip adjustment (add or remove up to 16 inches), horizontal mirroring
Cut length • Standard, synchro or user defined Supported media • DIN, ANSI, ARCHI formats
Copy module
Copy processing
• Océ Image Logic®Color
technology Color management • Based on OMP-profiles Number of copies • 1–99
• Set Memory: scan once, process once, print many
Original handling • Manual or automatic size detection
• Automatic Deskewing
Job settings • Programmable default setting
• 5 programmable templates—standard
• Pre-programming of the next copy
• Single sheet or multiple sheet/set
• Priority setting on job level
• Start printing while scanning
Copy color modes • Grayscale, color, blueprint Copy quality modes • Check, release, presentation
• Automatic resolution optimization
Copy content modes • Text & lines, Area fills Copy image types • Line art, Photo, Maps, Artwork Exposure control • Manual fine adjustment
• Automatic background compensation (on/off)
Loading...
+ 2 hidden pages