MSH-05
Monopod Support Holster
You’re on steady ground
®
Thank you for choosing Oben.
The Oben MSH-05 monopod support holster will
hold an extended monopod in the support pocket
to minimize arm fatigue or conveniently carry a
collapsed monopod in the holster sleeve.
Touch-connect strips create a belt loop for support
that’s comfortable to wear over extended periods.
Setup
1. Unfold the holster with
the pockets facing
away from you.
2. Fold the top flap over
and behind your belt,
and attach it to the
touch-connect strip on
the back of the holster.
Monopod Support
To support an extended
monopod, place the
monopod’s foot in the
front pocket.
1
Monopod Holster
For use as a holster,
place a collapsed
monopod foot-first into
the rear sleeve.
Packing Up
1. Unfasten the belt
loop, and remove it
from your belt.
2. Smooth the pockets
down so the holster
is flat.
3. Fold up the holster
from the bottom,
and attach the
touch-connect strips.
4. Use the carabiner to
attach the folded
holster to a belt loop,
camera bag, or
backpack.
2
One-Year Limited Warranty
This Oben product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a
period of one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that fails during
normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by
the warranty provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of equivalent quality
and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY
EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT
NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with
specific legal rights, and you may also have additional rights that vary from
state to state.
To obtain warranty coverage, contact the Oben Customer Service Department
to obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Oben along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.ObenSupports.com or
call Customer Service at 212-594-2353.
®
OBEN
A Gradus Group Brand
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Oben is a registered trademark of the Gradus Group.
© 2018 Gradus Group LLC. All Rights Reserved.
GG1
Loading...