Oben CC-2461L, AC-2341L, CC-2361L, AC-2361L, CC-2481L User manual

AC-2300L/CC-2300L/2400L Series

Lateral Tripod

You’re on steady ground™

1

Introduction

Thank You for choosing Oben!

Congratulations on your purchase of this sturdy, multi-featured Oben AC-2300L/CC-2300L/ CC-2400L Series lateral tripod. It will deliver lightweight, rock-solid support for your camera for years to come. In addition to providing normal vertical tripod support for your camera, the center column of this tripod can be placed in a horizontal position and rotated from 90° up to 90° down from the horizontal. The camera can be placed at any point in this 180° range. This is ideal for close-up macro photography, document photography, or any photography requiring a camera position that’s not available in the traditional tripod configuration.

Adjusting the tripod’s height is simple: just open the flip locks to extend or retract each telescopic leg separately. The center column locking knob releases the center column in a split second to slide up or down for further height adjustment. The center column has a square shape to prevent it from rotating accidentally.

Each leg can be positioned independently at 3 locking angles (24˚, 55˚, or 80˚), and a built-in bubble level helps keep the tripod aligned with the horizon — both essential when working on uneven terrain. Rubberized non-slip leg warmers (for aluminum models only) on two of the legs protect your hands in hot or cold weather.

Please read this entire manual before using the Oben AC-2300L/CC-2300L/CC-2400L Series tripod.

Note: Images are for illustrative purposes only. Actual product may vary.

2

TABLE OF CONTENTS

Key Features										5
Retractable Spiked Feet										6
Leg Length Adjustment										6
Leg Angle Adjustment												6
Center Column Adjustment											7
Low-Angle Setup										8
Mounting the Head										9
Warnings												10
Notes												11

3

KEY FEATURES

	A
F	E
C	B
	D
	G
	L

H

J

I

K

4