Oasis P5CP User Manual

COMPACT FLOOR STANDING
WATER COOLER

P5CP

Suggested Specification

Pressure drinking water cooler shall deliver at least 5 gph
of water at 50ºF (10ºC) cooled from 80ºF (26.7ºC) inlet water at
90ºF (32.2ºC) ambient. Bubbler shall have flexible guard, have
a non-squirt feature and a lever handle shall activate water flow.
Bubbler shall provide smooth steady water flow by means of
integral regulator that operates from 20 to 120 PSI supply
pressure. Evaporator shall be high efficiency tank type and shall
be encapsulated in insulation. R-134a refrigeration system shall
be hermetically sealed and refrigerant flow shall be capillary tube
controlled. An adjustable thermostat having an off position shall
control refrigeration system. Stainless steel top shall have an
integral drain strainer. Exterior panels shall be powder coated
galvanized steel (standard finish) or stainless steel (optional
finish). Potable water system components shall comply with
the Safe Drinking Water Act Amendments, the 1988 Lead
Contamination Control Act and shall be Certified to NSF/ANSI 61,
Section 9. Cooler shall be Listed by Underwriters’ Laboratories
Inc. to U.S. and Canadian safety standards.

Model

P5CP delivers 5 gph of chilled drinking water

Standard Features

> Waterways are Lead-Free in Materials and Construction
> Bubbler with activation lever
> Stainless steel top
> Heavy-gauge steel cabinet with separate galvanized steel base
> High-efficiency cooling tank and coil.
> Refrigerant R-134a
> Limited 5-Year Warranty

Finishes

> Standard Cabinet Finish: Sandstone powder coated paint
on galvanized steel
> Optional finishes at additional cost: Stainless Steel and
optional powder coated finishes.

Installation

> Prior to roughing-in, consult local, state and federal codes
> Shipped with complete instructions

Options

□ Push Handle glassfiller 029603-004
□ Push Back glassfiller 029603-005
□ Push Down glassfiller 029603-006
□ 031505-001 required for Field installation of glass fillers
□ Foot pedal operated

Limited 5-Year Warranty (Continental limits of the United
States and Canada): Five years on the sealed refrigeration
system and most components parts. Detailed warranty
certificate enclosed with each water cooler; sample copy
available upon request.

Export Warranty: One year on sealed refrigeration system
and most parts. Detailed warranty certificate enclosed
with each water cooler; sample copy available upon
request.

Product Certified to NSF/ANSI Standard 61, Annex G
(weighted average lead content of <=0.25%) and is in
compliance with California's Health & Safety Code Section
116875 (commonly known as AB1953).

Models covered by this specification comply with all known
Plumbing Codes. Listed by Underwriters’ Laboratories to
U.S. and Canadian standards and European Union
Directives.

Components in this cooler are lead free as defined
by the Safe Drinking Water Act Amendments of
1986, and the Lead Contamination Control Act of

1988.

50° F Drinking Water

90° F Ambient Air Temp*

Model

P5CP *** Yes Yes 69 Lbs.

Specifications subject to change without notice
* Industry Standard Rating Condition 80°F inlet water temperature. ** Not N’ Cold model delivers 45 six-ounce cups of water per hour in addition to cold water.
** Special export models available, operable on 220-240 volts, 50/60 Hertz. cULus certification not applicable.

Rated Capacity

GPH

Base Rate

GPH

5.0

Pre-Cooler Hot ’N Cold™

No

Model**

Compr.

HP

115 Volts, 60 HZ

Full Load

Amps

6.35/1oN0.5

Rated
Watts

250

Glass Filler
Acc. Option

Cabinet

Color Finish

Net Wt.
Approx.

Form 3952 | Rev. 06/09

Oasis International | 222 East Campus View Blvd. | Columbus, OH 43235

For Customer Service and Technical Helpline assistance call: 800.950.3226

OASIS

™

FREE-STANDING WATER COOLER MODEL P5CP

www.oasiscoolers.com

OASIS is a trademark of Oasis International

2009 Oasis International