Oasis P12FPM User Manual

FULLY-RECESSED

P8FPM, P12FPM

Suggested Specification

Model P8FPM shall deliver 8.0 gph of 50° F at 90° F ambient
and 80° F inlet water. Model P12FPM shall deliver 11.7 gph of
50° F at 90° F ambient and 80° F inlet water. Model P8FPM and
P12FPM have a push button on the front of the cabinet. Water
flows as long as the button is depressed. Cabinet finish shall be
brushed stainless steel. Cooling system shall use R-134a
refrigerant. Shall comply with ANSI A117.1. Shall be listed by
Underwriters’ Laboratories to U.S. and Canadian standards and
conform to European Union Directives.

Models

P8FPM delivers 8 gph of chilled drinking water when the

mechanical push-button is depressed, water continues to flow
as long as the button is depressed.
P12FPM delivers 11.7 gph of chilled drinking water when the
mechanical push-button is depressed, water continues to flow
as long as the button is depressed.

Standard Features

> Waterways Are Lead-Free In Materials & Construction
> Stainless Steel Surfaces
> Welded, Heavy-Gauge Steel Wall Mounting Frame
> High-Efficiency Cooling Tank and Coil
> Refrigerant R-134a
> Limited 5-year Warranty

Finishes

> Standard Cabinet Finish: Stainless Steel
> Optional finishes (at additional cost): Regency Bronze

Installation

> Prior to roughing-in consult with local, state, and federal
codes for proper mounting height.
> Shipped with complete instructions and wall mounting
sleeve
> Removable panels provide easy access for installation.

Accessory

□ Glass/Carafe Filler (Factory Installed 030239-003)

Limited 5-Year Warranty (Continental limits of the United
States and Canada): Five years on the sealed refrigeration
system and most component parts. Detailed warranty
certificate enclosed with each water cooler; sample available
upon request.

Export Warranty: One year on sealed refrigeration system

and most components parts. Detailed warranty certificate
enclosed with each drinking fountain; sample copy available
upon request.

Product Certified to NSF/ANSI Standard 61, Annex G

(weighted average lead content of <=0.25%) and is in

compliance with California's Health & Safety Code Section

116875 (commonly known as AB1953).

Models covered by this specification complies with all

known Plumbing Codes. Listed by Underwriters’ Laboratories

to U.S. and Canadian standards and conform to European

Union Directives.

Components in these water coolers are lead free as
defined by the Safe Water Act Amendments of 1986,
and the Lead Contamination Control Act of 1988.

50° F Drinking Water

90° F Ambient Air Temp*

Model

P8FPM ** 8.0 8.0 No No 1/5 4.3 380

P12FPM ** .sbL 69 seY seY

* Air Conditioning and Refrigeration Institute Standard Rating Condition 80° F inlet water temperature
** Special export models available, operable on 220-240 volts, 50 Hertz. UL. CBA and ARI certification not applicable

Rated Capacity

GPH

11.7 11.7 No No 1/3 8.7 690

Base Rate

GPH

Pre-Cooler Hot ’N Cold™

Model

Compr.

HP

115 Volts, 60 HZ

Full Load

Amps

Rated
Watts

**Specifications subject to change without notice

Glass Filler
Acc. Option

Yes Yes 92 Lbs.

Cabinet

Color Finish

Net Wt.
Approx.

Form 3728 | Rev. 06/09

Oasis International | 222 East Campus View Blvd. | Columbus, OH 43235

For Customer Service and Technical Helpline assistance call: 800.950.3226

OASIS

™

FULLY-RECESSED WATER COOLER MODEL P8FPM, P12FPM

www.oasiscoolers.com

OASIS is a trademark of Oasis International

2009 Oasis International