NZXT LEXA User Manual

LEXA

User’s manual

NZXT. 1

NZXT. 2

Thank you.

Dear Valued Customers,

Thank you for purchasing our product. With the booming of
the gaming market and computer cases, NZXT would like to
differentiate ourselves from other case companies by continuously
providing innovative next generation cases. With every product, we
hope to break more boundaries and limits. I hope you like our
products and look for us again in your future purchases. Any
comments and critiques are always welcome. Thank you again.

After you complete your installation, please come by our community
forums at

www.nzxt.com/forum to meet the NZXT team and fellow

fans of NZXT.

Sincerely,

NZXT Team

NZXT. 3

Product Specifications

MOTHERBOARDS: ATX, MICRO-ATX, BABY AT
DRIVE BAYS:

4 EXTERNAL 5.25” DRIVE BAYS
2 EXTERNAL 3.5” DRIVE BAYS
5 INTERNAL 3.5” HDD DRIVE BAYS
7 Expansion Slots

COOLING FANS OPTIONS

Front, 1 X 120 mm ( Included )
Rear, 1 X 120 mm Blue LED Fan ( Included )
Side, 1 X 120 mm Blue LED Fan ( Included )
Top, 1 X 80 mm Fan ( Included )

CHASSIS

DIMENSIONS (WXDXH): 220 X 522 X 569 mm
CHASSIS MATERIAL: Aluminum
CHASSIS WEIGHT : 5.8 kg

NZXT. 4

Case Strap/Lan Bag Installation

1. The case is used for storage and safety during
transportation. In order to secure the bag onto the case,
align the side with the NZXT logo with the right side panel
and the locking mechanism on the left side.

2. Slide the two locks from under the case and secure it.

3. The case can be carried using the handle or the strap
provided.

Rear Cage (Cable Management) Installation

1. The Lexa case comes with a rear cage for easy cable
management.

2. Insert the plastic rear cage into the slot at the bottom of the
rear panel.

3. Lock the cage in place by pushing down on the cage and
sliding it into the slot at the top of the rear panel.

4. For more security use four screws to secure the cage in the
back over the two side panels.

Power Supply Installation (If Without Power)

Please refer to the case interior infrastructure and secure the power
supply at the back of the case by using the screws provided.

NOTE: CPU, RAM and any peripheral installation are not
included in this manual. Please refer to your motherboard manual
for related mountin

g

instructions and troubleshooting.

Slide the power supply from under the aluminum bar to match the 4

screws in the rear.

Secure the power supply by securing the four screws.

Side Door Lock

The Lexa provides a key and lock for the side panel for security
usage. In order to open the side panel, insert the key into the lock
and turn counter clock wise to open the lock. Turn the key in a clock­wise direction to lock.

NZXT. 5