NZXT DUET User Manual

Duet

U se r’s m a n u a l

NZXT. 1

Thank you.

Dear Valued Customers,

Thank you for purchasing our product. With the booming of
the gaming market and computer cases, NZXT would like to
differentiate ourselves from other case companies by continuously
providing innovative next generation cases. With every product, we
hope to break more boundaries and limits. I hope you like our
products and look for us again in your future purchases. Any
comments and critiques are always welcome. Thank you again.

After you complete your installation, please come by our community
forums at www.nzxt.com/forum.

Sincerely,

NZXT Team

NZXT. 2

Duet Specifications

Features

Aluminum plated front panel
Small and compact design
Dual positioning, vertical or horizontal depending on home setup
Dual use vents for cooling or expandability, Install dual 120mm fan
capability or dual hard drives
Usb 2.0, Firewire, Intel HD audio and mic support

MOTHERBOARDS: ATX, MICRO ATX
DRIVE BAYS:

2 E XTE R N A L 5.25” DRIVE BAYS
1 E XTE R N A L 3.5” DRIVE BAYS
3 IN TE R N A L 3.5” H D D D R IV E B A YS
7 Expansion Slots

COOLING OPTIONS

Front, 1 X 80 mm
Rear, 2 X 80 mm ( Included )

CHASSIS DIMENSIONS (WXDXH): 370 X 455 X 148 mm
CHASSIS MATERIAL: Steel
CHASSIS WEIGHT: 5.0 kg

NZXT. 3

Before Beginning..

For safety issues, it is highly recommended that all users wear
gloves during installation. Also, if you have any questions during
installation, please send an email to [e-mail] before
proceeding. Thank you.

Removing the front and side panels

The NZXT Duet front and side panels needs to be removed when
installing devices and fans. Please follow the steps below to remove
the panels.

1. With the panel facing forward, use one hand to hold the case
in place.

2. Place the other hand on the opening at the bottom of the
front panel and pull to detach.

Detaching the front panel

NOTE: CPU, RAM and any peripheral installation are not
included in this manual. Please refer to your motherboard manual
for related mounting instructions and troubleshooting.

NZXT. 4

3. To remove the side panel, use a Phillips (cross shaped)
screw driver and remove the screws on the panel.

4. Pull the panel to remove.

Unscrewing the side panel

Pull the side panel to remove it

Motherboard Installation

The NZXT Duet supports the following motherboard: ATX and
MICRO ATX. The Index for the standoff holes are as follows. (