NXP Semiconductors KITMPR121EVM Quick Start Manual

Unpack the board.

Verify package contents
according to the kit Web
site: www.freescale.com/

sensortoolbox

Assemble the hardware by connecting
a development board to the interface
board. Any Sensor Toolbox electrode
boards, including the ones in this kit can
be used with this interface board.

At www.freescale.com/

sensortoolbox download

the latest software version by
clicking the link.

All Sensor Toolbox kits use the same
software and driver, so the install only
needs to be done once. Follow the
on-screen instructions to install the
communication driver for the tool. Check
back occasionally for software updates.

Plug in the USB and turn

the board on using the
power switch. Run the Sensor
Toolbox link on your desktop.

Explore other compatible kits at

www.freescale.com/sensortoolbox

KITMPR121EVM Quick Start Guide

SENSOR TOOLBOX

Proximity Sensor Kit

STEP

1

STEP

2

STEP

3

Get to know the KITMPR121EVM board

KITMPR121EVM
Interface Board

Power Switch

Standard Electrode Connector
Any Sensor Toolbox
Electrodes Can Be Used

6-Electrode LED
Board

12-Electrode
Numeric Keypad
Board

Connector for
the MPR121Q
Development Board

Freescale
8-bit MCU
MC9S08QG8

MPR121Q
Development
Board

Freescale
MPR121Q
3 x 3 x 0.6 mm QFN

USB Mini-b
Connector BDM Debug Port for MCU

Proximity Sensor Kit

SENSOR TOOLBOX

Freescale and the Freescale logo are trademarks or registered
trademarks of Freescale Semiconductor, Inc. in the U.S. and other
countries. All other product or service names are the property of
their respective owners. © Freescale Semiconductor, Inc. 2009.

Doc Number: KITMPR121EVMPQSG / REV 0
Agile Number: 926-78346 / REV A

Learn more at www.freescale.com/sensortoolbox.