NVT NV-PS56-90W Specsheet
56VDC 90W Power Supply
Model NV-PS56-90W
Data Sheet
The NVT Model NV-PS56-90W Power Supply delivers 56VDC at up to 90 watts for use with the
NV-EC1701, NV-EC1701U, NV-ET1801, NV-ET1804, and NV-ER1804 Ethernet transceivers.
Up to two power supplies may be used, provided the total system power does not exceed 120 watts.
These supplies are external inline, with an
IEC380-C14 power inlet and a 6 ft (1.18 m) line cord.
Input voltage is 100~240VAC 50/60Hz. A molded P1J 5.5mm barrel connector provides a
class 2 (SELV) regulated output.
ELECTRICAL SPECIFICATIONS
Input: 100-240VAC 50 / 60 Hz 0.5A
IEC380-C14 power inlet
Output: 56V 90W Regulated Class 2 (SELV)
molded P1J 5.5mm barrel connector
LED: Green “Power”
Transient immunity: 5 x 20µS 3,000A, 6,000V
ESD 20KV, 200pF
Use only the power cord provided with the unit or equivalent UL
approved type SPT-2, SVT, or SJT 18/3 AWG 100~240 VAC, 1 Amp
60°C max 15 ft (4.5 m) long. One end with IEC380-C13 appliance
coupler and the other end with NEMA 1015P or equivalent for your
country.
REGULATORY
Complies with these regulatory agency certifications and directives.
MECHANICAL SPECIFICATIONS
Dimensions:: 5.77 in (147 mm) long
Shipping weight: 0.94 lb (0.43 Kg)
2.36 in (60 mm) wide
1.27 in (32 mm) high
ENVIRONMENTAL SPECIFICATIONS
Operating / storage temperature: -40°F to +185°F (-40°C to +85°C)
20 to 5% relative humidity
WARRANTY
Specificatiuons subject to change without notice.
non-condensing
Limited lifetime
Page 1 of 1
UL Listed to IEC/UL 60950-1 Complies with FCC part 15A limits
Network Video Technologies
(+1) 650.462.8100 • +44 (0) 208 977-6614
nvt.com • info@nvt.com
Copyright © 2014 NVT, Inc.
411-5690-1-A1
2014/01
Loading...