NVT NV-PL-08-DEMO Specsheet
IP MIGRATION MADE SIMPLE
NVT PHYBRIDGE
PoLRE LPC SWITCH
Ethernet and PoE
over a Single Pair of Wire
with1,200 ft (365 m) Reach
The plug and play PoLRE (Power over Long Reach Ethernet) LPC switch is an
8 port unmanaged ethernet switch. This powerful switch delivers ethernet and
PoE over a single pair of wire with 1,200 ft (365 m) reach.
PoLRE was designed to make the migration to IP quick, easy and cost effective
by leveraging an existing single pair UTP infrastructure. Benets include:
• Accelerating your return on investment by reducing infrastructure costs;
• Collapsing planning and deployment time;
• Eliminating infrastructure barriers, risks, disruption and costs;
• Creating a robust IP platform that is easy to congure, deploy and
manage.
Unlike other Ethernet switch technologies, the PoLRE LPC switch
offers:
Speed, Reach and Power
The LPC delivers 10 Mbps (symmetrical, full duplex) and PoE over a single
pair of UTP with 1,200 ft (365 m) reach. It is designed to support IP Phones
and other IEEE compliant devices. There is no reduction in bandwidth speed
based on longer distances.
DATA SHEET
PoLRE LPC Switch
At-a-Glance
The PoLRE LPC switch is a highperforming 8 port unmanaged switch
that helps maximize your return on
investment and reduce your total cost of
ownership.
The PoLRE LPC transforms the existing
two-wire infrastructure into a robust IP
platform with power ideal for IP phones
and other IEEE compliant IP devices.
Advantages
• Quick, easy and cost effective IP
migration
Simple Deployment
PoLRE LPC was designed to make it simple for small businesses or distributed
enterprise to simplify their IP migration. No network conguration required.
• Plug-and-play unmanaged switch
• Ethernet and PoE over a single pair
of wire with 4 times the reach of
traditional switches
Member of CHARIoT Series of L ng Reach
PoE Switches
NVT PHYBRIDGE
PoLRE LPC Switch
DATA SHEET
PoLRE 8 Port Unmanaged Switch Technical Specications
Model NV-PL-08
Dimensions
Interface:
Ethernet
Uplink (Trunk
Interface:
Downlink
(PoE and IP
to Adapter)
The PoLRE 8 model NV-PL-08 comes with an 8 port switch,
2 Phylink adapters and a 100 watt external power supply.
• 1.77” x 7.01” x 4.72” (HxWxD)
• 4.5cm x 17.8cm x 12cm (HxWxD)
• Weight: (0.679 lbs) 0.308 kg
2 RJ45 ports: 10/100 Base-T auto-sensing, independent speed selection, Ethernet IEEE 802.3, CAT5
copper cable
IP)
8 x RJ11 Jacks
Maximum Distance: 1200ft (365 m) CAT3 UTP cable,
24 AWG
Speed: 10 Mbps (full duplex)
Power: 15 Watts
Phylink Adapter Technical Specications
Model NV-PL-PA-011-6 (sold as 6 pack)
Dimensions
Interface
PoLRE
Switch Side)
Interface
Ethernet
for IP end
point device
• 0.71” x 1.1” x 2.56” (HxWxD)
• 1.8cm x 2.8cm x 6.5cm (HxWxD)
• Weight: 0.78 oz (22 g)
1 RJ11 port: CAT3 unshielded single twisted pair
cable. Between the wall plate and adapter, you can
reuse the existing line cord when doing a DNIC/
POTS displacement.
side:
1 RJ45 port: 10 Base-T
Power Supply 48VDC
Power
Consumption
Power Injection
Operating
Temperature
Humidity 10% to 95% (non-condensing) at 95°F (35°C)
External
Power Supply
Rack Mount
Power Supply 48VDC
Power
Consumption
Power Injection
Operating
Temperature
Humidity 10% to 95% (non-condensing) at 95°F (35°C)
2.9W
48VDC; Endpoint devices must be compliant with
(PoE)
IEEE 802.3af
14°F to 115.6°F (-10°C to 45.5°C)
External 100w power supply included. Optional
higher power supplies available.
Model NV-PL-RMEC10
Specications subject to change without notice.
0.9W
DC voltage on RJ45 port:
• 54V max
• 37V when 1200ft (365m) away from its PoLRE
(PoE)
Switch powers Class 1, Class 2 and some
Class 3 IEEE 802.3af compliant IP devices
32°F to 104°F (0°C to 40°C)
Specications subject to change without notice.
for more information visit www.nvtphybridge.com
Loading...