NVT NV-PL-024, NV-PL-048 Specsheet

IP MIGRATION MADE SIMPLE

2

0

Ethernet and PoE
over a Single Pair of Wire with
1,200 ft (365 m) Reach

AWARD WINNING PoLRE

The award winning 24 and 48 Port PoLRE (Power over Long Reach Ethernet) switches
deliver Ethernet and PoE over a single pair of wire with over 1,200 ft (365 m) reach. This
means you can transform your single pair UTP infrastructure into a robust IP backbone
with power.

PoLRE was designed to make the migration to IP quick, easy and cost effective by
leveraging an existing single pair UTP infrastructure. Benefits include:

• Accelerating your return on investment by reducing infrastructure costs;

• Collapsing planning and deployment time;

• Eliminating infrastructure barriers, risks, disruption and costs; and

• Creating a robust IP platform that is easy to configure, deploy and manage.

Unlike other Ethernet switch technologies, the PoLRE switch offers:

Speed, Reach and Power

PoLRE delivers 10 Mbps (symmetrical, full duplex) and PoE over a single pair of UTP with
over 1,200 ft (365 m) reach. It is designed to support IP phones and other IEEE compliant
devices. No speed degradation with longer reach.

Industry Leading PowerWISE® Technology

Power sharing for redundancy, load balancing, AC/DC options, hot swappable power
supply and auto-sensing 100-240 VAC delivering 500 to 1,000 Watts of power. PoLRE is
one of the most energy efficient switches on the market, consuming less than 17 Watts
of power to operate.

Managed Switch with Plug-and-Play Option

PoLRE can operate in a transparent mode functioning as a bridge, allowing for plug-and­play deployment to a fully managed switch with high value features specifically designed
for the security industry, including:

NVT

PoLRE SWITCH

DATA SHEET

PoLRE Switch

At-a-Glance

The PoLRE managed switches are high­performing enterprise grade managed switch
that helps maximize your return on investment
and reduce your total cost of ownership.

PoLRE transforms the existing two wire
infrastructure into a robust IP platform with
power ideal for IP phones and other IEEE
compliant IP devices.

Advantages

• Quick, easy and cost effective IP migration

• Robust enterprise grade switch features
ensuring uptime

• Simple GUI interface making configuring,
managing and troubleshooting the network
a breeze

• Power management by port for easy reset of ports;

• Port MAC locking for higher security and peace of mind; and

• Simple Network Manager, an intuitive Web GUI that makes managing the switch a
breeze.

OVER

YEARS

1994 ~ 2015

NVT

PoLRE SWITCH

DATA SHEET

PoLRE 24 & 48 Port Managed Switch Technical Specifications

Model PoLRE 24 & PoLRE 48

19 inches (48.26cm) x 1U without rack ears:

Dimensions

Mounting
Processor Broadcom BCM56018 switch processor, 266MHz

Memory 32MB FLASH, 64MB DDR SDRAM

Interface:

Ethernet Uplink

(Trunk IP)

Specifications subject to change without notice.

• 1.75” x 17.13” x 9.92” (HxWxD)

• 4.45cm x 43.5cm x 25.2cm (HxWxD)

• Weight 7.94 lb (3.6 kg)
Standalone or rack or shelf-mountable 2 brackets included

for installation

Maximum 2 uplinks, each 1Gb/s (full duplex), either:

• 2 mini-GBIC ports: 1000 Base-TX/SX/LX/EX/ZX/LHX
(determined by SFP, transceiver module installed), Ethernet
IEEE 802.3z, fiber optic cable, or

• 2 RJ45 ports: 10/100/1000 Base-T autosensing,
independent speed selection, Ethernet IEEE 802.3, CAT5e
copper cable

Downlink (PoE and IP

Power Consumption PL-024: 16.5W PL-048: 22W

Power Injection (PoE)

PowerWISE® Power

TECHNICAL FEATURES

Interface:

to Adapter)

Management

Power Supply

Sharing

Operating

Temperature

Humidity 10% to 95% (non-condensing) at 95°F (35°C)

PL-024: 1 RJ21 male telco connector (standard), 24 pairs used
PL-048: 2 RJ21 male telco connectors (standard), 48 pairs used
Maximum Distance: 1500ft (457m) over CAT3 UTP cable, 24 AWG
Speed: 10 Mbps (full duplex)
Power: 10 Watts

1 LAN port (MGMT): RJ45, 10/100 Base-T autosensing, IEEE 802.3 1
UART console port: RJ45 to DB9 cable

Unit Autosensing 100-240VAC, 50/60 Hz
Power output: 500W max at 100VAC, 1000W max at 240VAC

DC voltage: -54VDC; Endpoint devices must be compliant with IEEE

802.3af
2 male connectors (rear), DC IN and DC OUT: 48VDC to 56VDC

14°F to 122°F (-10°C to 50°C)

Phylink Adapter Technical Specifications

Model PL-PA011

Dimensions

Interface

PoLRE Switch Side

Interface Ethernet

side: for IP end

point device

• 0.71” x 1.1” x 2.56” (HxWxD)

• 1.8cm x 2.8cm x 6.5cm (HxWxD)

• Weight: 0.78 oz. (22 g)
1 RJ11 port: CAT3 unshielded single twisted pair cable.

Between the wall plate and adapter, you can reuse the
existing silver satin when doing a DNIC/POTS displacement.

1 RJ45 port: 10 Base-T

Power Supply 48VDC

Power Consumption 0.9W

DC voltage on RJ45 port:

Power Injection (PoE)

Operating

Temperature

Humidity 10% to 95% (non-condensing) at 95°F (35°C)

• 54V max

• 37V when 1200ft (365m) away from its PoLRE Switch

32°F to 104°F (0°C to 40°C)

powers Class 1, Class 2 and some Class 3 IEEE 802.3af
compliant IP devices

Specifications subject to change without notice.

CANADA | UNITED STATES | UNITED KINGDOM | PRAGUE | MEXICO | COLOMBIA | SINGAPORE
www.nvt.com | +1.650.462.8100 | Toll Free: 1.800.959.9870 | UK [phone] | [e-mail]