NVT NV-ECLK Specsheet
NVT PHYBRIDGE
EC-Base Extender
DATASHEET
Fast Ethernet and PoE+
over Coax with up to
6,000ft (1,830m) Reach
EC-Base Extender Solution
The NVT Phybridge EC-Base Extender Solution is designed to supercharge
the downlink ports of a standard Ethernet switch, delivering 10/100Mbps
symmetrical (full duplex) and PoE over Coax infrastructure with distances up
to 6,000ft (1,830m). That’s 18X the reach of standard Ethernet switches,
thus removing the costs and disruptions associated with multiple IDF closet
requirements.
With the EC-Base Extender Solution, IP IoT devices can be connected to the
existing Coax cabling infrastructure, delivering optimal performance while
saving cost, time, and environmental e-waste. Furthermore, the cost savings
realized by using the EC Extender Solution can enable system designers to
transfer budget and resources towards higher-quality applications and
IEEE-compliant IoT devices, including IP-enabled phones, cameras, access
control, speakers, and even facilities lighting.
Extend the reach of standard PoE switches with the
EC Extender Solution
EC-Base Paired with the EC-Link Enable 1 IP endpoint from a single long run
Coax cable with up to 30W of power
Standard PoE Switch
3 51 9 117 15 1713 21 2319 27 2925 33 3531 39 4137 45 4743
4 62 10 128 16 1814 22 2420 28 3026 34 36
32 40 4238 46 4844
NV-ECLK-BSE
SFP 1
SFP+1
EC-Base
Long Reach PoE over Coax
SFP+2
SFP 2
Local Power
Option
Coax Cable
4,000ft (1,220m)
Local Power
Option
NV-ECLK
IP Endpoint
AT A GLANCE
(NV-ECLK-BSE)
• Base unit for 1-port long reach PoE
Extender
• Negotiates with PoE switch
• When paired with EC-Link+ (50W), EC4
(30W) or EC-Link (30W) Adapters,
delivers PoE over coax with up to
6,000ft (1,830m) reach
• Can be locally powered
• EN 50121-4 Standard for Railway/
Subway environments
EC-EXTENDER KITS
Each EC Extender Kit is conveniently
packaged and includes an EC-Link+ or
EC4 Adapter, an EC-Base Extender, and
an external power supply.
1-Port EC Extender Kit
(NV-ECLK-PLS-XKIT)
• Extend reach of standard PoE switch
• Single port coax extender solution
enabling 1 endpoint from a single long
run Coax cable
• 10/100Mbps symmetrical (full duplex)
and PoE+ (up to 30W) with up to
6,000ft (1,830m) reach
• Up to 50W of power available for the
endpoint
• Adapters can be locally powered
• Includes: EC-Base Extender, EC-Link+
Adapter, and 60W, 55V external power
supply
*EC-Base Paired with the EC-Link+ Enable 1 IP endpoint from a single long
run Coax cable with up to 50W of power
Standard PoE Switch
3 51 9 117 15 1713 21 2319 27 2925 33 3531 39 4137 45 4743
4 62 10 128 16 1814 22 2420 28 3026 34 36
32 40 4238 46 4844
NV-ECLK-BSE
SFP 1
SFP+1
EC-Base
Long Reach PoE over Coax
SFP+2
SFP 2
Local Power
Option
Coax Cable
up to 6,000ft (1,830m)
Local Power
NV-ECLK-PLS
Option
EC-Link
+
Long Reach PoE over Coax
IP Endpoint
*EC-Base Paired with the EC4 Enable 4 IP endpoints from a single long run
Coax cable with up to 50W of power per port
Standard PoE Switch
3 51 9 117 15 1713 21 2319 27 2925 33 3531 39 4137 45 4743
4 62 10 128 16 1814 22 2420 28 3026 34 36
32 40 4238 46 4844
NV-ECLK-BSE
SFP 1
SFP+1
EC-Base
Long Reach PoE over Coax
SFP+2
SFP 2
Local Power
Option
Coax Cable
up to 3,000ft (915m)
Local Power
Option
NV-EC-04
IP Endpoint
IP Endpoint
IP Endpoint
IP Endpoint
*Pairing options available in conveniently packaged EC-Extender Kits
4-Port EC Extender Kit
(NV-EC-04-XKIT)
• Extend reach of standard PoE switch
• Single port coax extender solution
enabling 4 IP endpoints from a single
long run Coax cable
• 10/100Mbps symmetrical (full duplex)
and PoE+ (up to 30W) with up to
3,000ft (915m) reach
• Delivers up to 30W of power per
downlink port
• Adapters can be locally powered
• Includes: EC-Base Extender, EC4
Adapter, and 110W, 55V external
power supply
by NVT Phybridge
EC-Base Technical Specifications
Model EC-Base
Part Number NV-ECLK-BSE
Dimensions
• 10.09cm x 5.03cm x 2.57cm (LxWxH);
• 3.97” x 1.98” x 1.01” (LxWxH)
Weight 108g (3.81oz.)
Interface:
Network
Infrastructure
1 BNC port: Coax cable (RG59, RG6, RG11)
side (CLEER)
Interface: IEEE
Side (IP Device)
Power Supply
(For General/PoE Switch)
1 RJ45 port: supports negotiation with IEEE 802.3
af/at switches
PoE from standard PoE switch, or external power
suppl
y; maximum 50W if locally powered
EC-Base Compliance and Agency Approval
EMC
Safety
Environment RoHS Directive 2011/65
Emissions: FCC Part 15, ICES-003, EN 55032:2012, EN 50121-4:2015
Class B
Immunity: EN 55024:2010, EN 50121-4:2015
UL 60950-1 2nd Ed 2014-10-14, CAN/CSA C22.2 No. 60950-1-07 2nd Ed 2014-10
IEC 60950-1:2005+A1+A2, EN 60950-1:2006+A1+A2+A11+A12
Power & Distance Chart
Power
Consumption
1W
-58°F to +158°F (-50°C to +70°C)
Operating
temperature
Tests conducted against international safety
standard at maximum ambient temperatures of
60ºC at 30W and 55ºC at 50W
Mean Time
Before Failure
20+ years
(MTBF)
Humidity 10% to 95% (non-condensing) at 35° C
Model NV-RMEXT
Rack Mount
EC-Base used with EC-Link+
300ft
(92m)
RG11 14AWG 30W 30 30 30 30 29 29 28 27 27 25 24
RG6 18AWG 30W 30 28 27 26 24 22 20 14 16 12 8
RG59 20AWG 30W 27 24 22 19 15 10 6 2 0
EC-Base used with EC-Link
RG11 14AWG 30W 30 30 30 30 29 29 28 27 27
RG6 18AWG 30W 30 28 27 26 24 22 20 14 16
RG59 20AWG 30W 27 24 22 19 15 10 6 2 0
EC-Base used with EC4
RG11 14AWG 30W 30 30 30 30 29 29 28
RG6 18AWG 30W 30 28 27 26 24
RG59 20AWG 30W 27 24 22 19
100Mbit
10Mbit
600ft
(183m)
900ft
(275m)
1,200ft
(365m)
1,500ft
(457m)
2,000ft
(610m)
2,500ft
(762m)
3,000ft
(915m)
3,500ft
(1,067m)
4,000ft
(1,220m)
5,000ft
(1,524m)
(1,830m)
Power & Distances are based on the following cable specs:
Cable Spec Core Type AWG Diameter Wire Resistance (m) Wire Resistance (ft)
RG-11 Solid Copper 14 AWG 1.63 mm 1.21 Ω/100m 0.37 Ω/100ft
RG-6 Solid Copper 18 AWG 1.01 mm 3.60 Ω/100m 1.10 Ω/100ft
RG-59U Solid Copper 22 AWG 0.64 mm 7.87 Ω/100m 2.40 Ω/100ft
6,000ft
For more information, visit: www.nvtphybridge.com
NV-ECLK-BSE-6.19.2019
Loading...