NVT NV-CLR-024-1000 Specsheet
IP MIGRATION MADE SIMPLE
Fast Ethernet and PoE+
over Coax Cable with
2,000 ft (610 m) Reach
The award winning CLEER (Coax Leveraged Ethernet Extended Reach) switch
is the world’s rst 24 port Ethernet over Coax managed switch. This powerful
enterprise grade switch delivers fast ethernet and PoE+ over coax cable with
2,000 ft (610 m) reach.
CLEER was designed to make the migration to IP quick, easy and cost effective
by leveraging an existing coax infrastructure. Benets include:
NVT PHYBRIDGE
CLEER SWITCH
DATA SHEET
CLEER Switch
At-a-Glance
• Accelerating your return on investment by reducing infrastructure costs.
• Collapsing planning and deployment time.
• Eliminating infrastructure barriers, risks, disruption and costs.
• Creating a robust IP platform that is easy to congure, deploy and manage.
Unlike other Ethernet over Coax technologies, the CLEER switch
offers:
Speed, Reach and Power
CLEER delivers 100 Mbps (symmetrical, full duplex) and PoE+ over coax cable
with 2,000 ft (610 m) reach. It is designed to support the most demanding
IP Cameras with plenty of bandwidth to spare. No speed degradation with
longer distance.
Industry Leading PowerWISE® Technology
Power sharing for redundancy, load balancing, AC/DC options, hot swappable
power supply and auto-sensing 100-240 VAC delivering 500 to 1,000 watts
of power. CLEER is one of the most energy efcient switches on the market,
consuming less than 17 Watts of power to operate.
Managed Switch with Plug-and-Play Option
CLEER can either operate in a transparent mode functioning as a bridge,
allowing for plug-and-play deployment, or as a fully managed switch with
high value features specically designed for the security industry, including:
The CLEER is a high-performing,
enterprise grade, 24 port Ethernet
over Coax managed switch that helps
maximize your return on investment
and reduce your total cost of
ownership.
CLEER transforms the existing coax
infrastructure into a robust IP platform
with power ideal for IP cameras and
other IEEE compliant IP devices.
Advantages
• Quick, easy and cost effective IP
migration
• Robust enterprise grade switch
features ensuring uptime
• Simple GUI interface making
conguring, managing and
troubleshooting the network a
breeze
• Power management by port for easy reset of ports.
• Port MAC locking for higher security and peace of mind.
• Simple Network Manager, an intuitive Web GUI that makes managing the switch
a breeze.
NVT PHYBRIDGE
CLEER SWITCH
DATA SHEET
CLEER Switch Technical Specifications
Model NV-CLR-024
19 inches (48.26cm) x 1U without rack ears:
Dimensions
Weight
Mounting
Processor
Memory
Interface:
Ethernet
Uplink
(Trunk IP)
A media converter (EC-Link or EC4) is required at the device end.
Please refer to Media Converter data sheet.
Specications subject to change without notice.
• 1.75” x 17.13” x 9.92” (HxWxD)
• 4.45cm x 43.5cm x 25.2cm (HxWxD)
7.94 lbs (3.6 kg)
Standalone, rack or shelf-mountable; 2 brackets
included for installation
Broadcom BCM56018 switch processor, 266MHz
32MB FLASH, 64MB DDR SDRAM
Maximum 2 uplinks, each 1Gb/s (full duplex), either:
• 2 mini-GBIC ports: 1000 Base-TX/SX/LX/EX/ZX/
LHX (determined by SFP, transceiver module installed), Ethernet IEEE 802.3z, ber optic cable; or
• 2 RJ45 ports: 10/100/1000 Base-T auto-sensing,
independent speed selection, Ethernet IEEE
802.3, CAT5e/6 copper cable
Interface:
Downlink
(PoE and IP to
Adapter)
Management
Power Supply
Power
Consumption
Power Injec-
tion (PoE)
PowerWISE®
Power Sharing
Operating
Temperature
Humidity
24 x BNC Jacks
Speed: 100Mbps (full duplex)
PoE Power: 30 Watts Maximum (See Appendix)
Maximum Distance:
• 1500ft (457m) over RG59 COAX Cable
• 2000ft (610m) over RG6 COAX Cable
24 x Status LEDs:
• Conguration Options: Link Activity / Link / Off
1 LAN port (MGMT): RJ45, 10/100 Base-T
auto-sensing, IEEE 802.3
1 UART console port: RJ45 (RJ45 to DB9 cable
included)
Hot-Swappable Power Supply Unit
Auto-sensing 100-240VAC, 50/60 Hz
Power Output: 500W max at 100VAC, 1000W max
at 240VAC
16.5W
DC voltage: 48VDC to 56VDC
Endpoint devices must be compliant with IEEE
802.3af/at
2 male connectors (rear)
DC IN and DC OUT: 48VDC to 56VDC
14°F to 122°F (-10°C to 50°C)
10% to 95% (non-condensing) at 95°F (35°C)
for more information visit www.nvtphybridge.com
Loading...