Model NV-3213S
32-Channel Video Transceiver Hub (AVAILABLE SUMMER, 2008)
RJ45A Adaptors
Features:
• Compact rack mountable 19" 1U high enclosure features 32 channels and only 1.54" (40mm) deep
• Use with any NVT passive transceiver or hub for full motion CCTV at distances up to 750ft (225m)
• Use with any NVT DigitalEQTMHub or active receiver as a rack-mountable passive
transmitter for distances up to 3,000ft (1km)
• Use with any NVT StubEQTMfor distances up to 1,500ft (460m)
Included
• RJ45 video connectivity with optional NV-RJ45A RJ45-to-screw terminal adaptors (included)
• No power required
• Exceptional interference rejection
• Built-in transient protection
• Supports “up-the coax” type control signal up to 750ft (225m)
• Compatible with qualified UTP cameras
• Limited lifetime warranty
The NVT Model NV-3213S is a compact 32-channel passive transceiver hub that allows transmission of
real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband
(composite) signals of any type are supported.
“Up-the-coax” type signal may be sent over the same wire pair at distances up to 750ft (225m).
The unparalleled interference rejection ability of the Model NV-3213S Hub allows video signals to
co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for
larger CCTV installations where port density and camera number growth are prevalent. With built-in
transient protection, damaging voltage spike problems are eliminated.
Network Video Technologies
4005 Bohannon Drive • Menlo Park, CA 94025 • USA
(+1) 650.462.8100 • 800.959.9870 • FAX (+1) 650.326.1940
nvt.com • info@nvt.com
-69-
1+
2
-
3+
4
-
5+
6
-
7+
8
-
Ch. 1, 5,9, 13, 17, 21, 25, or 29
Ch. 4, 8, 12, 16, 20, 24, 28, or 32
Ch. 3, 7, 11, 15, 19, 23, 27, or 31
Ch. 2, 6, 10, 14, 18, 22, 26, or 30
Model NV-3213S
32-Channel Video Transceiver Hub
Technical Specifications
V ID E O
Frequency response DC to 5 MHz
Attenuation 0.5 dB typ
Common-mode / Differential-mode rejection
15 KHz to 5 MHz 60 dB typ
Impedance
Coax, female BNC 75 ohms
UTP, Screw terminal block or RJ45 100 ohms
W IR E TY P E
Network Wiring One Unshielded Twisted Pair
24-16 AWG (0,5-1,31mm)
Category Type 2 or better
Impedance 100 ± 20 ohms
DC Loop Resistance 52 ohms per 1,000ft
(18 ohms per 100m)
Differential Capacitance 19 pF/ft max
(62 pF/m max)
P OW E R
No external power required
E NV I R O N ME N T AL
Ambient temperature -22 to +167°F (-20 to +75 °C)
Humidity (non-condensing) 0 to 95%
Transient Immunity per ANSI / IEEE 587 C62.41
M EC H A N I CA L
Dimensions, excluding brackets and connectors
Weight 2.2lb (1kg)
Dimensions 19in wide, 1.7in high, 1.8in deep
43cm wide, 4,3cm high, 40mm deep
Mounting
Rack or wall mount
A CC E S S O RI E S (included)
Eight NV-RJ45A RJ45 to screw terminal adaptors
Rack mounting screws and screw driver
Specifications subject to change without notice.
Typical Applications
Passive to Passive Application up to 750ft (225m)
Passive “S” Hub to Active Hub Application up to 3,000ft (1km)
NV-208A-M
NV-3213S
4005 Bohannon Drive • Menlo Park, CA 94025 • USA
(+1) 650.462.8100 • 800.959.9870 • FAX (+1) 650.326.1940
Punch
block
(IDF)
Backbone
Punch
block
(IDF)
Backbone
Punch
block
(IDF)
Active receiver available in
1, 4, 8, 16 and 32 Channels
Network Video Technologies
nvt.com • info@nvt.com
-70-
NV-3213S
DVR / NVR
DVR / NVR
Monitor
IP
Monitor
IP
Copyright © 2009 NVT, Inc.
411-1259-1-C