Model NV-215J-M
Video Transceiver
Features:
• Full-motion CCTV video at distances up to 750ft (225m) when used
with any Passive NVT Transceiver or hub
TM
• Up to 1,500 feet (460m) shall be supported by any NVT StubEQ
TM
• Up to 3,000 feet (1,000m) with a DigitalEQ
Hub or NVT Active Receiver
• Frequency response DC to 10MHz (see Resolution Distance Chart)
• Mini-coax pigtail supports in-camera mounting in most dome cameras
• RJ45 UTP terminal connection
Hub
• No power required
• Exceptional interference rejection
• Built-in transient protection
• Supports “up-the-coax” type control signal up to 750ft (225m)
• Limited lifetime warranty
The NVT Model NV-215J-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time
monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type
are supported.
The passive NV-215J-M has a 9" mini-coax pigtail lead which allows in-camera enclosure mounting in most dome cameras
and a RJ45 for connection to UTP wire. It is capable of delivering a fully equalized signal to the DVR when used with any
Active NVT Receiver, yet is compatible with all of NVT’s passive products for applications under 750ft (225m). The NV-215JM Video Transceiver also incorporates improved transient protection that eliminates the need for a ground screw.
The unparalleled interference rejection and low emissions of the NV-215J-M allow video signals to co-exist in the same wire
bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.
Model NV-215J-M
Cat 5 Wire Distance
Cat 5 Wire Distance
235
315
400
475
550
630
700
780
3 MHz
4 MHz
5 MHz
6 MHz
9 MHz
8 MHz
7 MHz
10 MHz
100ft
Camera Lines of Resolution
Frequency
300ft
1,000ft
1 mile
3,000ft
10,000ft
30m
100m
300m
1,6km
1km
3km
M
a
x
P
a
s
s
i
v
e
D
i
s
t
a
n
c
e
M
a
x
S
t
u
b
E
Q
D
i
s
t
a
n
c
e
M
a
x
D
i
g
i
t
a
l
E
Q
D
i
s
t
a
n
c
e
Video Transceiver
Technical Specifications
V I D E O D I S T A NC E RE C O M M E N D A T IO N S
P O W E R
No external power required
E N V I R O N M E N TA L
Ambient ambient temperature -22 to +167 °F (-30 to +75 °C)
Humidity (non-condensing) 0 to 95%
Transient Immunity per ANSI / IEEE 587 C62.41
W I R E T Y P E
Network Wiring One Unshielded Twisted Pair
24-22 AWG (0,5-0,64mm)
Category Type 2 or better
Impedance 100 ± 20 ohms
DC Loop Resistance 52 ohms per 1,000ft
(18 ohms per 100m)
Differential Capacitance 19 pF/ft max
(62 pF/m max)
V I D E O
Frequency response DC to 10 MHz
Attenuation 0.5 dB typ
Common-mode / Differential-mode rejection
15 KHz to 5 MHz 60 dB typ
Impedance
Coax, male BNC 75 ohms
UTP, RJ45 100 ohms
M E C H A N I C A L
Body Length 1.8in (45mm)
Body Height 1.0in (26mm)
Body Width 1.65in (42mm)
Product Weight 2.0oz (60g)
Packaged Weight 0.14lb (63g)
Specifications subject to change without notice.
Typical Applications
Passive to Passive Application up to 750ft (225m)
Passive transceiver available in
NV-215J-M
Punch
block
(IDF)
Backbone
Punch
block
(IDF)
Passive to Active Application up to 3,000ft (1km)
NV-215J-M
Punch
block
Backbone
(IDF)
Punch
block
(IDF)
1, 4, 8, 16 and 32 Channels
DVR / NVR
Active receiver available in
1, 4, 8, 16 and 32 Channels
DVR / NVR
Monitor
IP
Monitor
IP
-52-