NVT NV-1613S Specsheet
Model NV-1613S
16-Channel Video Transceiver Hub
RJ45A Adaptors
Features:
• Compact rack mountable 19" 1U high enclosure features 16-channels
and is only 1.54" (40mm) deep
• Use with any NVT passive transceiver or hub for full motion CCTV at distances up to 750ft (225m)
• Use with any NVT DigitalEQTMHub or active receiver as a rack-mountable passive
transmitter for distances up to 3,000ft (1km)
• Use with any NVT StubEQTMfor distances up to 1,500ft (460m)
Included
• RJ45 video connectivity with optional NV-RJ45A RJ45 to-screw-terminal adaptors (included)
• No power required
• Exceptional interference rejection
• Built-in transient protection
• Supports “up-the coax” type control signal up to 750ft (225m)
• Compatible with qualified UTP cameras
• Limited lifetime warranty
The NVT Model NV-1613S is a compact 16-channel passive transceiver hub that allows
transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) cable.
Baseband (composite) signals of any type are supported.
“Up-the-coax” type signal may be sent over the same wire pair at distances up to 750ft (225m).
The unparalleled interference rejection ability of the Model NV-1613S Hub allows video signals to
co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for
larger CCTV installations where port density and camera number growth are prevalent. With built-in
transient protection, damaging voltage spike problems are eliminated.
Network Video Technologies
4005 Bohannon Drive • Menlo Park, CA 94025 • USA
(+1) 650.462.8100 • 800.959.9870 • FAX (+1) 650.326.1940
nvt.com • info@nvt.com
-65-
1+
2
-
3+
4
-
5+
6
-
7+
8
-
Ch. 1, 5, 9, 13
Ch. 4, 8, 12, 16
Ch. 3, 7, 11, 15
Ch. 2, 6, 10, 14
Model NV-1613S
16-Channel Video Transceiver Hub
Technical Specifications
V ID E O
Frequency response DC to 5 MHz
Attenuation 0.5 dB typ
Common-mode / Differential-mode rejection
15 KHz to 5 MHz 60 dB typ
Impedance
Coax, female BNC 75 ohms
UTP, Screw terminal block or RJ45 100 ohms
W IR E TY P E
Network Wiring One Unshielded Twisted Pair
24-16 AWG (0,5-1,31mm)
Category Type 2 or better
Impedance 100 ± 20 ohms
DC Loop Resistance 52 ohms per 1,000ft
(18 ohms per 100m)
Differential Capacitance 19 pF/ft max
(62 pF/m max)
P OW E R
No external power required
E NV I R O N ME N T AL
Ambient temperature -22 to +167 °F (-30 to +75 °C)
Humidity (non-condensing) 0 to 95%
Transient Immunity per ANSI / IEEE 587 C62.41
M EC H A N I CA L
Dimensions, excluding brackets and connectors
Weight 1.2lb (.55kg)
Dimensions 19in wide, 1.7in high, 1.54in deep
43cm wide, 4,3cm high, 40mm deep
Mounting
Rack or wall mount
A CC E S S O RI E S (included)
Four NV-RJ45A RJ45 to screw terminal adaptors
Rack mounting screws and screw driver
Specifications subject to change without notice.
Typical Applications
Passive to Passive Application up to 750ft (225m)
NV-208A-M
Passive “S” Hub to Active Hub Application up to 3,000ft (1km)
Punch
block
(IDF)
NV-1613S
Backbone
Punch
block
(IDF)
Backbone
Punch
block
(IDF)
NV-1613S
DVR / NVR
Active receiver available in
1, 4, 8, 16 and 32 Channels
DVR / NVR
Monitor
IP
Monitor
IP
Network Video Technologies
4005 Bohannon Drive • Menlo Park, CA 94025 • USA
(+1) 650.462.8100 • 800.959.9870 • FAX (+1) 650.326.1940
nvt.com • info@nvt.com
-66-
Copyright © 2009 NVT, Inc.
411-1258-1-B
Loading...