Nuna demi grow User Manual

Page 1
IM-0238B
Page 2
Designed
around your life
Page 3
2
3
Contents
Product Information
Product Registration 4 Warranty 4 Contact 4
Child Usage Requirements 5
Warnings 6
Parts List 8
Product Set Up 10
Product Use 16
Seating Options 24
Accessories 28
DEMI grow stroller/sibling seat 28 DEMI grow stroller/sibling seat rain cover 28 DEMI grow bassinet 30 DEMI grow car seat post adapters 32 DEMI grow car seat ring adapter 34
Cleaning and Maintenance 36
IMPORTANT!
KEEP THESE INSTRUCTIONS
FOR FUTURE REFERENCE:
READ CAREFULLY
Page 4
Child Usage Requirements
This stroller/sibling seat is suitable for use with children who meet the following requirements:
Weight: up to 50 lbs (22.7 kg) maximum Height: 45 in. (114.3 cm)
When using the stroller frame with the bassinet or infant carrier, refer to the child usage requirements listed in those instruction manuals.
4
5
Product Information
Model Number:____________________________________________________________________________________________________________________________________
Manufactured in (date): _____________________________________________________________________________________________________________
Product Registration
Please fill in the above information. The model number and the manufactured in date are located on a label on the stroller frame. Fill out the prepaid registration postcard attached to the product and mail it today.
To register your product please visit:
www.nuna.eu/register-gear
Warranty
We have purposely designed our high-quality products so that they can grow with both your child and your family. Because we stand by our product, our gear is covered by a custom warranty per product, starting from the day it was purchased. Please have the proof of purchase, model number and manufactured in date available when you contact us.
For warranty information please visit:
www.nuna.eu/warranty
Contact
For replacement parts, service, or additional warranty questions, please contact our customer service department.
In the USA:
infousa@nuna.eu www.nuna.eu
1.855.NUNA.USA
Page 5
6
7
A child’s safety is your responsibility. NEVER leave your child unattended.
To avoid any danger of suffocation, remove all plastic covers before using this product and destroy or keep away from babies and children!
Keep small parts away from children as they pose a choking hazard.
Discontinue using these products should they become damaged or broken.
Use original Nuna parts and accessories only. Each stroller/sibling seat is intended for children up to 50 lbs
(22.7 kg) maximum or a height of 45 in. (114.3 cm). To prevent a hazardous, unstable condition, do not place
more than 10 lbs (4.5 kg) in the storage basket before use. Use of the stroller with more than 110 lbs (49.9 kg) will cause
excessive wear and stress on the stroller. 110 lbs (49.9 kg) = 50 lbs (22.7 kg) stroller/sibling seat maximum + 50 lbs (22.7 kg) stroller/sibling seat maximum + 10 lbs (4.5 kg) storage basket maximum
Negotiate curbs and rough ground carefully. Repeated impact could cause damage to this product.
This stroller is to be used only at walking speed. Stroller is not intended for use while jogging, skating, etc.
The parking brake MUST be engaged when the stroller is stopped and when placing and removing child.
Overloading, incorrect folding, and using accessories other than those approved by Nuna, e.g. child seats, bag hooks, rain covers, buggy boards, etc., may damage or make this stroller unsafe.
WARN I N G
Failure to follow these warnings and instructions could result in serious injury or death.
Adding accessories such as purses, shopping bags, or parcels to the handle or canopy can cause the stroller to be unstable.
This stroller does not replace a crib or a bed. Should your child need to sleep, they should be placed in a crib or approved sleeping area based on your child’s requirements.
Avoid serious injury from falling or sliding out. Always use seat belt. After fastening buckles, adjust belts to get a snug fit around your child.
AVOID FINGER ENTRAPMENT Use care when folding and unfolding the stroller. Be certain the stroller is fully erected and latched before allowing your child near the stroller.
STRANGULATION HAZARD Do not place items with a string around your child’s neck, suspend strings from this product, or attach strings to toys.
ALWAYS keep your child in view while in this product.
ALWAYS allow the fabric to dry naturally away from direct heat.
ALWAYS check that the attachments are correctly engaged.
DO NOT let your child play with this product.
DO NOT place any item on the canopy of this product.
DO NOT leave this product exposed in the vicinity of a strong
source of heat i.e. a radiator or open fire or store this product in a damp place.
DO NOT make any changes or modifications to this product, that are not specified in this manual.
DO NOT use storage basket as a child carrier.
NEVER carry more than one child in a seating position at a
time in this stroller.
NEVER use the stroller on stairs or escalators. You may suddenly lose control of the stroller or your child may fall out.
NEVER allow children to stand on the footrest.
Page 6
8
9
Parts List
Make sure all parts are available before assembly. If any part is missing, please contact Nuna (see page 4 for information). No tools are required for assembly.
CHOKING HAZARD: Remove and immediately discard
protective end caps from each wheel and wheel hub axle.
1 Front Wheel (x2)
2 Rear Wheel (x2)
3 Rear Fender (x2)
4 Car Seat Post
Adapters (x2)
5 Rain Cover
6 Dream Drape
7 Stroller/Sibling Seat
8 Stroller Frame
9 Canopy
10 Seat Pad
11 Head Support
12 Arm Bar
13 Shoulder Harness Pads
14 Calf Support
15 Front Wheel
16 Stroller Handle
17 Arm Bar Adjustment
Button
18 Seat Release Button
19 Buckle and Crotch Cover
20 Upper Seat Mount
21 Storage Latch
22 Storage Basket
23 Recline Adjustment
Button
24 Handle Adjustment Button
25 Folding Button
26 Lower Seat Mount
27 Rear Fender
28 Custom Dual
Suspension™ Adjustment Lever (x2)
29 Brake Lever
30 Rear Wheel
x2 x2 x2
x2
1
4
9 16
23
24
25
27
26
28
29
30
18
17
19 20
21
22
10
11
12 13
14
15
2 3
5
7
8
6
Page 7
10
1 4
52
3
11DEMI grow stroller instructions
1
2
1 4
552
3
Product Set Up
Open Stroller 1 - Separate the storage latch from the storage mount. 2 - Then, rotate the stroller handle up. 3 - A “click” sound means the stroller frame is open
completely.
Check the stroller frame is completely latched open before continuing.
Rear Wheels 4 - Insert the rear wheel into the rear leg. A “click” sound
means the rear wheel is assembled completely.
Check the wheel is securely attached by pulling out.
Repeat on opposite side.
5 - To remove the rear wheel, press the release button (1)
and detach the rear wheel from the rear leg (2).
click
click
Page 8
1 4
52
3
12 DEMI grow stroller instructions 13DEMI grow stroller instructions
1
2
1 4
52
3
Front Wheels 1
- Insert the front wheel into the front leg. A “click” sound means the wheel is assembled completely.
Check the wheel is securely attached by pulling out
Repeat on opposite side.
2 - To remove the front wheel, press the release button (1)
and detach the front wheel from the front leg (2).
Canopy 3 - Clip the canopy mount onto the stroller/sibling seat on
each side.
4 - Zip the canopy to the stroller/sibling seat. 5 - To remove the canopy, unzip the zippers, then remove
the canopy mounts.
click
Page 9
Arm Bar 1 - Align the arm bar ends with the arm bar mounts, and
insert until it clicks into place. A “click” sound means the arm bar is assembled completely.
2 - To remove the arm bar, press the arm bar release buttons
(1) located under seat pad, and remove the arm bar. (2)
3 - For a more compact fold, press the armbar adjustment
buttons (1) and rotate the armbar down (2) until it clicks into place.
Only use the down/stored position for folding. NEVER
use this position with child in stroller.
Stroller/Sibling Seat
The stroller/sibling seat can be attached rear or forward facing.
4 - Align the sides of the stroller/sibling seat with the seat
mounts. Place the stroller/sibling seat directly down until it clicks into place. A “click” sound means the stroller/ sibling seat is assembled completely.
5 - To remove the stroller/sibling seat, squeeze the seat
release buttons (1) and lift the stroller/sibling seat up (2).
Rear Fenders
Attach the rear fenders for twin and double modes. For easier assembly, remove the rear wheels.
6 - Insert the rear fender into the rear leg. A “click” sound
means the fender is assembled completely. Check the fender is securely attached by pulling up. Repeat on opposite side and reattach rear wheels.
Check Set Up
Stroller frame is latched open Rear and front wheels securely attached Canopy mount attached to stroller frame and canopy
zipped to seat pad
Stroller/sibling seat securely attached Rear fenders securely attached for twin/double mode
1
4
2
1
1
2
2
2
1
2
14 DEMI grow stroller instructions
click
5
15
Page 10
Product Use
The parking brake MUST be engaged when the stroller
is stopped and when placing and removing child.
Securing Your Child 1
- Push the center button on the buckle to release the buckle latch, remove the clips and place your child in the stroller.
2 - Connect the shoulder buckle and hip buckle. 3 - Secure the shoulder buckle and hip buckle to the buckle
latch and repeat on the opposite side.
4 - Fit the harness snugly to your child by sliding the lower
adjustment buckles (located under the harness covers) up (1). Then pull the waist adjustment straps out (2).
Shoulder Harness Position 5
- The upper shoulder harness buckles can be moved up and down for added adjustment.
To avoid serious injury from falling or sliding out, always
secure your child with the harness. Make sure the harness is adjusted properly and your
child is snugly secured. The space between the child and the shoulder harness should be about the thickness of one finger. DO NOT cross the shoulder belts. This will cause pressure on your child’s neck.
Shoulder Harness Pad Removal
To remove the shoulder harness pads, release the buckle.
6 - Slide the shoulder harness pad down off the shoulder
buckle harness strap.
To reattach the shoulder harness pad, undo the snaps and insert the shoulder harness buckle through the inside loop.
16
17
1
1
2
2
Page 11
18
19
1
2
1
2
1
5
6
1 4
2
3
Canopy 1
- To open the canopy, pull the canopy toward the front of the seat, and to close the canopy, push it back.
2 - Open the zipper (1) on the canopy to use the dream
drape™.
3 - Pull down on the dream drape
for extra shade.
4 - For added ventilation, flip the canopy window cover up.
Handle
The handle has 4 positions.
5 - To adjust the height of the handle, press the handle
adjustment button (1) and pull the handle up or down
(2).
Calf Support
The calf support has 2 use positions.
6 - To raise the calf support, lift up. To lower the calf
support, press the adjustment button in the middle of the calf support (1), and push down (2).
1
Page 12
Recline 1 - There are 3 recline positions for the backrest. 2 - To raise or lower the backrest, squeeze the recline
adjustment button, and pull the seat up or down.
Seat Pad
Use the winter seat pad in cold weather to provide a comfortable seating area. The winter seat pad can be removed to provide a mesh seating area for better ventilation during hot weather.
3 - To remove the seat pad, unbuckle the harness, open
the zipper around the seat pad and route the harness through the seat pad slots.
DO NOT remove the backrest tube.
Brake 4
- To lock the rear wheels, step down on the brake lever.
5 - To unlock the rear wheels, lift up on the brake lever.
Always apply the brake when the stroller is stopped.
Push the stroller slightly to ensure the brake is engaged.
Custom Dual Suspension
The stroller has two suspension modes. Make sure there is no weight placed on the stroller when you are adjusting the suspension and that both adjustment levers are in the same position.
6 - Flip the adjustment levers up (1) when on rough
terrain for a softer suspension and flip the adjustment levers down (2) when on smooth surfaces for a stiffer suspension.
When using as a double or twin, it is recommended to flip the adjustment levers down.
4
5
63
1 2
20
21
Page 13
22
23
2
3
1 4
4
6
2
3
Front Swivel Locks
It is recommended to use the front swivel locks on uneven surfaces.
1 - Pull the front swivel lock out to lock front wheel forward
facing.
2 - Push the front swivel lock in to unlock.
Fold
Before folding the stroller, adjust the handle to the 2nd or 3rd highest position and make sure the front swivel locks are unlocked.
The stroller can be folded with the stroller/sibling seat facing forward or without the stroller/sibling seat.
If folding with the seat, place the seat in the most reclined position for a more compact fold.
3 - Fold the armbar (1) and canopy (2), and rotate the
storage latch out (3).
4 - Lift both folding buttons. 5 - Rotate the handle down and make sure the storage latch
is closed on the stroller frame.
6 - Fold the calf support down for a more compact fold.
1
Page 14
24
25
Seating Options
The DEMI grow stroller frame can be used with the infant carrier (using included adapters), bassinet and stroller/sibling seat in the following combinations. Single (1), twin (2), double (3)
1 3
2
Page 15
26 DEMI grow stroller instructions 27DEMI grow stroller instructions
1
2
3
Seating Option Use
When using the stroller frame with the stroller/sibling seat, bassinet or infant carrier, close the canopy when the stroller/ sibling seat, bassinet or infant carrier is assembled on the lower mount.
Not all accessories are included on some models and
not all modes are allowed.
1 - DO NOT use the stroller/sibling seat (1), bassinet (2) or
infant carrier (3) rear facing on the lower mount.
2 - DO NOT adjust the backrest of the stroller/sibling seat
up, when it is assembled on the lower mount and the bassinet is assembled on the upper mount.
3 - DO NOT assemble the infant carrier on the lower mount
when the bassinet is rear facing on the upper mount.
4 - DO NOT adjust the infant carrier handle to the vertical
position when the infant carrier is assembled on the lower mount.
4
1
2
3
Page 16
28
1
29DEMI grow stroller instructions
1
2
Accessories
Not all accessories are included on some models.
DEMI grow stroller/sibling seat
When installing the stroller/sibling seat in the lower mount, close the canopy, adjust the calf support to its highest position, and fold the stroller basket rear panel forward.
1 - To attach stroller/sibling seat, align the sides of the
stroller/sibling seat with the seat mounts.
Place the stroller/sibling seat directly down until it clicks into place. A “click” sound means the stroller/sibling seat is attached.
Remove the stroller/sibling seat from the lower mount
before folding the stroller.
DEMI grow stroller/sibling seat rain cover
Only use the stroller/sibling seat rain cover in the upper mount.
2 - To assemble the rain cover, place it over the stroller/
sibling seat.
ALWAYS check ventilation, when the rain cover is
on the product.
ALWAYS check that the rain cover has been cleaned and dried before folding.
DO NOT fold the stroller assembled with the rain cover.
DO NOT place your child into the stroller assembled with
rain cover during hot weather.
Page 17
1
1
1
2
1 3
2
30 DEMI grow stroller instructions 31DEMI grow stroller instructions
DEMI grow bassinet
For bassinet assembly and usage, please refer to the bassinet instruction manual.
When installing the bassinet in the lower mount, close the canopy.
1 - To attach the bassinet, align the sides of the bassinet
with the seat mounts.
Place the bassinet directly down until it clicks into place. A “click” sound means the bassinet is attached.
2 - The bassinet can be installed rear or forward facing in
the upper mount.
3 - To remove the bassinet, press the bassinet release
buttons (1) and lift up (2).
Remove the bassinet before folding the stroller.
Page 18
1
2
1
2
1
1
1
2 2
1 4
52
3
32 DEMI grow stroller instructions 33DEMI grow stroller instructions
DEMI grow car seat post adapters
For infant carrier assembly and usage, please refer to the infant carrier instruction manual.
When installing the infant carrier in the lower mount, close the canopy.
1 - To attach the car seat post adapters, place the car seat
post adapters on the seat mounts. A “click” sound means the car seat post adapters are attached.
2 - To attach the infant carrier, place the infant carrier on the
car seat post adapters. A “click” sound means the infant carrier is attached.
3 - To remove the infant carrier, push the stroller release
buttons on the infant carrier (1) and lift up (2).
4 - To remove the car seat post adapters, pull the adapter
release buttons (1) and lift up (2).
5 - The car seat post adapters and infant carrier can be
attached rear facing (1) or forward facing (2) in the upper mount.
Remove the infant carrier before folding.
Page 19
1
2
1
2
1 4
52
3
2
1
34 DEMI grow stroller instructions 35DEMI grow stroller instructions
DEMI grow car seat ring adapter
For infant carrier assembly and usage, please refer to the infant carrier instruction manual. For car seat ring adapter set up, please refer to the DEMI grow car seat ring adapter instruction manual.
When installing the infant carrier in the lower mount, close the canopy.
1 - To attach the car seat ring adapter, place the car seat
ring adapter on the seat mounts. A “click” sound means the car seat ring adapter is attached.
2 - To attach the infant carrier, place the infant carrier on the
car seat ring adapter. A “click” sound means the infant carrier is attached.
3 - To remove the infant carrier, push the stroller release
button located on the back of the infant carrier (1) and lift up (2).
4 - To remove the car seat ring adapter, push the adapter
release buttons (1) and lift up (2).
5 - The car seat ring adapter and infant carrier can be
attached rear facing (1) or forward facing (2) in the upper mount.
Remove the infant carrier before folding.
Page 20
36
DEMI grow stroller instructions
Cleaning and Maintenance
Clean the frame, plastic parts, and fabric with a damp cloth, but do not use abrasives or bleach. Do not use silicon lubricants as they will attract dirt and grime. Do not store your stroller in a damp place.
Clean the stroller wheels regularly with water and remove any dirt.
To ensure long-lasting use, wipe off this product with a soft, absorbent cloth after using it in rainy weather.
Refer to the care label attached to the fabric for washing and drying instructions.
It is normal for fabric to color from sunlight and to show wear and tear after a long period of use, even when used normally.
For reasons of safety, only use original Nuna parts.
Check regularly if everything functions properly. If any parts are torn, broken, or missing, stop using this product.
©2017 Nuna Baby Essentials, Inc. Nuna and all associated logos are trademarks.
Page 21
IM-0238B
Loading...