Numark Industries PPD01 User Manual

USER’S MANUAL

PPD01

SAFETY INSTRUCTIONS

a) Read Instructions - All the safety and operating instructions should be read

before this product is connected and used.

b) Retain Instructions

for future reference.

c) Heed Warnings

instructions should be followed.

d) Follow Instructions

e) Placement

f) Water and Moisture -

with liquids. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

g) Temperature-

such as radiators. Do not use this unit at temperatures below 41°F/5°C or higher than 95°F/35°C.

h) Ventilation -

position does not interfere with it’s proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation opening; or, placed in a built-installation, such as bookcase or cabinet that may impede the flow of air through the ventilation openings.

i) Power Sources -

of the type described in these operating instructions, or as marked on the unit.

j) Power Cord Protection -

are not likely to be walked upon or pinched by items placed on or against them. When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord.

k) Object and Liquid Entry

liquids are not spilled into the inside of the mixer.

l) Cleaning

manufacturer. Do not use chemical solvents to clean the unit.

m) Non-use Periods

from the outlet when left unused for long periods of time.

n) Damage Requiring Service -

product. If you have any questions about service please contact Numark at the number(s) shown on the back cover of this manual.

o) Grounding or Polarization -

grounding or polarization means built into the CD player is not defeated.

p) Internal/External Voltage Selectors -

switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.

q) Carts and Stands

that is recommended by the manufacturer of the cart or stand. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Disconnect power cord before servicing

•

Replace critical components only with factory parts or

•

recommended equivalents For AC line powered units - Before returning repaired unit to user,

•

use an ohmmeter to measure from both AC plug blades to all exposed metallic parts. The resistance should be no more than 100,000ohms.

- The safety and operating instructions should be kept

- All warnings on this product and in these operating

- All operating and other instructions should be followed.

– place the unit in a clean dry location.

This product should be kept away from direct contact

Avoid placing this product to close to any high heat sources

The appliance should be situated so that it’s location or

This product should be connected to a power supply only

Power supply cords should be routed so that they

- Take care that objects do not fall into and that

– The appliance should be cleaned only as recommended by the

– The power cord of the appliance should be unplugged

Only qualified personnel should service this

Precautions should be taken so that the

Internal or external voltage selector

－The appliance should be used only with a cart or stand

SERVICE INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE ANY COVER. NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL ONLY.

The lightning flash with arrowhead symbol within the

equilateral triangle is intended to alert the user to the

presence of un-insulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying this appliance.

CAUTION

FOR USA & CANADIAN MODELS ONLY

TO PREVENT ELECTRIC SHOCK DO NOT USE

THIS (POLARIZED) PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER

OUTLET UNLESS THE BLADES CAN BE FULLY

INSERTED TO PREVENT BLADE EXPOSURE.

WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.

NOTICE CONCERNING FCC REGULATIONS

This equipment generates and uses radio frequency energy and may cause interference to radio and television reception if you do not operate it in strict accordance with the procedures detailed in this OPERATING MANUAL. This unit complies with Class B computing device rules in accordance with the specifications in Sub-part J or Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. There is no guarantee, however, that interference will not occur in a particular installation. If the unit does cause interference to any radio or television reception, try to reduce it by one or more of the following means: a) Reposition the other unit and/or its antennae

b) Move this unit

c) Move this unit and the other unit(s) further apart d) Plug this unit into a different AC outlet so that it is on a different circuit from the other equipment.

This note is in accordance with Section 15.838 of the FCC Rules.

This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications.

For 220-volt use in USA, use NEMA style 220-volt plug. For

other countries use proper plug for local outlet.

DOUBLE INSULATED - When servicing use only identical replacement parts

- The Leader in DJ Technology

PPD01

VERY IMPORTANT – MIXER CARE

Please read this entire manual before connecting this unit to your system

For optimum performance:

• All the slide faders are user replaceable items and subject to wear. Excessive force can wear out the fader quickly. This is not a

warranted item.

• Never use spray cleaners on the slide controls. Residues cause excessive dirt build-up and this will void your warranty. In

normal use slide controls can last for many years. If they malfunction (usually because of a dirty or dusty environment) consult a professional technician.

• Always make sure that AC power is OFF while making any connections.

• Use appropriate cables throughout your system. Do not use excessively long cables (i.e. over 50ft/14m) Be sure plugs and jacks

are tightly mated. Loose connections can cause hum, noise or intermittents that could easily damage your speakers. Make the input and output connections with readily available low-capacitance stereo cables. Quality cable makes a big difference in audio fidelity and punch. See your Numark dealer or an electronics or audio specialist store if you are not sure which cables to get.

• Never attempt to make any adjustments or repairs other than those described in this manual. Take the unit to your dealer or to

an authorized Numark Service Center.

• ALWAYS remember: “TURN AMPS ON LAST AND OFF FIRST”. Begin with master faders or volume controls on minimum and the

amplifier gain/input control(s) down. Wait 8 to 10 seconds before turning up the volume. This prevents transients which may cause severe speaker damage.

• Use restraint when operating controls. Try to move them slowly. Rapid adjustments could damage speakers due to amplifier

clipping.

• Avoid amplifier “clipping” at all costs: this occurs when the red LEDs (usually on the front panel of most professional power

amplifiers) start flashing. “Clipping” is when the power amplifier is distorting and working beyond it’s limits. Amplifier distortion

major cause of speaker failure.

is THE

• To prevent fire or shock hazard, do not expose the unit to rain or moisture. Never place cans of beer, soda, glasses of water or

anything wet on top of the unit!

• The headphone outputs can be set to levels which can cause damage to your ears. Use caution.

CHECK TO BE SURE

THE FOLLOWING ITEMS ARE IN THIS BOX:

• MIXER

• OWNERS MANUAL (THIS BOOKLET)

• POWER SUPPLY

- The Leader in DJ Technology

PPD01

CONGRATULATIONS...

You have just purchased a digital mixer designed specifically for the professional DJ. This unit has been designed with the latest digital technology to offer premium performance and effects. Several innovative features are included to ensure maximum results from your performance. Once again, congratulations and thank you for making the PPD01 your choice in professional DJ Mixers.

Features:

• World’s only 24-bit Digital 2 Channel Mixer with a S/N ratio

of >102dB*, 0.005% THD+N, full path

• World’s first mixer with all Digital, Replaceable, and

Interchangeable VCA Faders with slope and reverse controls.

• World’s first mixer with 8 digital crossfader functions for

various DJing styles.

• World’s first Dual Mode tone controls on each channel

Mode a) 3-band Digital EQ-KILLS

Mode b) Low Pass/Band Pass/High Pass filter option with sweepable frequency and resonance (Q)

• 8-position phono/line switches.

• Look-ahead peak limiters on the master and headphone

outputs to avoid clipping

• Mini-crossfader cueing with headphone tone control.

• Master Balanced, Booth, Optical and Coax Digital outputs.

• 2 Phono, 5 Line, 1 Mic Inputs.

*A weighted

Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit. Retain this information and your original purchase receipt for your records. Please return the enclosed warranty card to register your CD player with us.

MODEL: PPD01 PURCHASED FROM: SERIAL NUMBER: DATE OF PURCHASE:

- The Leader in DJ Technology

+ 8 hidden pages