Numark Industries CDN25 User Manual

CDN25

PROFESSIONAL DUAL CD PLAYER

MANUAL

CDN25

SAFETY INSTRUCTIONS

a) Read Instructions - All the safety and operating instructions should be read

before this product is connected and used.

b) Retain Instructions - The safety and operating instructions should be kept

for future reference.

c) Heed Warnings - All warnings on this product and in these operating

instructions should be followed.

d) Follow Instructions - All operating and other instructions should be followed.

e) Placement – place the unit in a clean dry location.

f) Water and Moisture - This product should be kept away from direct contact

with liquids. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

g) Temperature- Avoid placing this product to close to any high heat sources

such as radiators. Do not use this unit at temperatures below 41°F/5°C or higher than 95°F/35°C.

h) Ventilation - The appliance should be situated so that it’s location or

position does not interfere with it’s proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation opening; or, placed in a built-installation, such as bookcase or cabinet that may impede the flow of air through the ventilation openings.

i) Power Sources - This product should be connected to a power suppl y only

of the type described in these operating instructions, or as marked on the unit.

j) Power Cord Protection - Power supply cords should be routed so that they

are not likely to be walked upon or pinched by items placed on or against them. When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord.

k) Object and Liquid Entry - Take care that objects do not fall into and that

liquids are not spilled into the inside of the mixer.

l) Cleaning – The appliance should be cleaned only as recommended by the

manufacturer. Do not use chemical solvents to clean the unit.

m) Non-use Periods – The power cord of the appliance should be unplugged

from the outlet when left unused for long periods of time.

n) Damage Requiring Service - Only qualified personnel should service this

product. If you have any questions about service please contact Numark at the number(s) shown on the back cover of this manual.

o) Grounding or Polarization - Precautions should be taken so that the

grounding or polarization means built into the CD player is not defeated.

p) Internal/External Voltage Selectors - Internal or external voltage selector

switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.

q) Carts and Stands －The appliance should be used only with a cart or stand

that is recommended by the manufacturer of the cart or stand. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

•

Disconnect power cord before servicing

•

Replace critical components

recommended equivalents

•

For AC line powered units - Before returning repaired unit to user,

use an ohmmeter to measure from both AC plug blades to all exposed metallic parts. The resistance should be no more than 100,000ohms.

SERVICE INSTRUCTIONS

only with factory parts or

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE ANY COVER. NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL ONLY.

The lightning flash with arrowhead symbol within the

equilateral triangle is intended to alert the user to the

presence of un-insulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying this appliance.

CAUTION

FOR USA & CANADIAN MODELS ONLY

TO PREVENT ELECTRIC SHOCK DO NOT USE

THIS (POLARIZED) PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER

OUTLET UNLESS THE BLADES CAN BE FULLY

INSERTED TO PREVENT BLADE EXPOSURE.

WARNING:

appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.

NOTICE CONCERNING FCC REGULATIONS

This equipment generates and uses radio frequency energy and may cause interference to radio and television reception if you do not operate it in strict accordance with the procedures detailed in this OPERATING MANUAL. This unit complies with Class B computing device rules in accordance with the specifications in Sub-part J or Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. There is no guarantee, however, that interference will not occur in a particular installation. If the unit does cause interference to any radio or television reception, try to reduce it by one or more of the following means:

This note is in accordance with Section 15.838 of the FCC Rules.

This unit does not exceed the Class B limits for radio noise emission from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications.

To reduce the risk of fire or electrical shock, do not expose this

a) Reposition the other unit and/or its antennae

b) Move this unit

c) Move this unit and the other unit(s) further apart d) Plug this unit into a different AC outlet so that it is on a different circuit from the other equipment.

DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM.

USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE

DOUBLE INSULATED - When servicing use only identical replacement parts

For 220-volt use in USA, use NEMA style 220-volt plug. For other countries use proper plug for local outlet.

- The Leader in DJ Technology

- 2 -

http://www.numark.com

CDN25

CDN25CDN25

PROFESSIONAL DUAL

PROFESSIONAL DUALPROFESSIONAL DUAL

CONGRATULATIONS...

You have just purchased a CD player designed specifically for the professional DJ. This unit has been designed to provide CD mixing with the same ease and creativity that you have enjoyed with records. Please take a few moments to familiarize yourself with the CDN25 by reading the following information before attempting to operate the unit.

Once again, congratulations and thank you for making the CDN25 your choice in professional CD players.

CD PLAYER

CD PLAYERCD PLAYER

CDN25

FEATURES:

• Interactive pitch wheel adjustment

• Rubber buttons

• Digital Output

• Frame search

• Sleep mode

CHECK TO BE SURE

THE FOLLOWING ITEMS ARE IN THIS BOX:

CD PLAYER TRANSPORT UNIT CD PLAYER CONTROL UNIT IEC POWER CORD

Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit. Retain this information and your original purchase receipt for your records. Please return the enclosed warranty card to register your CD player with us.

• Rapid wheel search

• Auto cue

• Pitch display

• CDR compatible

OWNERS MANUAL (THIS BOOKLET) RCA CONNECTING CABLES (2 pair) CONTROL CABLE

MODEL: __________________________ PURCHASED FROM:_________________________ SERIAL NUMBER:___________________ DATE OF PURCHASE:________________________

- The Leader in DJ Technology

- 3 -

http://www.numark.com

CDN25

Safety Instructions 2

Introduction and Registration 3

Set-up & Connections 5

Description of the Features

Face Panel 6 Rear Panel 8 Display 9

Basic Operation

Play, Pause and Cue Operations 11 Matching the Tempo 12 Beat Matching Using Pitch Bend 12

Example of Mixing 13

Before Switching off the Power 14

Troubleshooting Guide 14

Information and Specifications 15

Warranty 16

- The Leader in DJ Technology

- 4 -

http://www.numark.com

SETUP and CONNECTIONS

Typical connection with a mixer is illustrated below.

1. Mount the units in your console or rack with 19” EIA rails.

2. The transport should be mounted not to exceed an angle of 15 degrees.

3. Your CD player can be affected by excess vibration so mount the units in a secure

environment if possible.

4. Connect the supplied Control Cable between the CD Control and CD Transport unit.

5. Connect the line output connections using the supplied audio cables from the CD

Player to the line inputs of your mixer.

6. Connect IEC power cord to appropriate power source.

CDN25

LINE VOLTAGE SELECTION

1) The desired voltage may be set with the VOLTAGE SELECTOR switch on the rear panel of the unit.

2) Do not move the VOLTAGE SELECTOR switch with excessive force as this may cause damage.

3) If the VOLTAGE SELECTOR switch does not move smoothly contact a qualified serviceman.

DIGITAL OUTPUTS: This CD player is specially equipped with digital outputs. The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). When the digital output is used the variable pitch slider and pitch bend buttons or pitch wheel should not be used.

Note: If digital information is allowed to change in pitch, other devices may not read the digital output properly.

- The Leader in DJ Technology

- 5 -

http://www.numark.com

115V

230V

+ 11 hidden pages

Numark Industries CDN25 User Manual

SAFETY INSTRUCTIONS

DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM.

USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE

DOUBLE INSULATED - When servicing use only identical replacement parts

TABLE OF CONTENTS

LINE VOLTAGE SELECTION