N-Tron 509FX User Manual

The N-TRON™ 509FX Series Industrial Ethernet Switch offers
outstanding performance and ease of use. It is ideally suited for
connecting Ethernet enabled industrial and/or security equipment
and can be optionally configured with advanced Ethernet
communication management functions.

PRODUCT FEATURES

• Full IEEE 802.3 and 1613 Compliance

• NEMA TS1/TS2 Compliance

• American Bureau of Shipping (ABS) Type Approval

• Eight 10/100 BaseTX RJ-45 Ports

• One 100BaseFX Uplink Port, ST or SC (shown)

• Extended Environmental Specifications

• Auto Sensing 10/100BaseTX, Duplex, and MDIX

• Store-and-forward Technology

• Up to 2.6 Gb/s Backplane Throughput

• Rugged Industrial DIN-Rail Enclosure

• Redundant Power Inputs (10-30 VDC)

• Bi-Color LED's For Link, Speed, Activity & Duplex Status

Advanced Management Features (With -A option only):

• IGMP Snooping

• Port VLAN

• QoS

• Port Trunking

• Mirroring

• N-View

Advanced Management Functions

The 509FX-A offers several management functions that can be
easily configured using the COM Port (DB 9 Connector located
on the right side of the switch ).
IGMP Snooping - Internet Group Management Protocol is a
feature that allows the 509FX-A switch to forward multicast traffic
intelligently.
VLAN - Virtual Local Area Network allows you to segment the
switch in order to create two or more separate local area network
domains.
QoS - Quality of Service provides prioritization of network traffic
in order to provide better network service. The primary goal of
QoS is to improve the latency of prioritized Ethernet packets
required for ring management, real-time and other interactive
applications.
Trunking - Port trunking (aggregation) enables multiple
physical ports to be linked together and function as one uplink to
another N-TRON trunking capable switch configured in the same
manner, thereby increasing the bandwidth between switches. This
configuration can provide increased bandwidth and redundancy
to applications requiring high levels of fault tolerant operation.
Port Mirroring - This 509FX-A function allows the traffic on
one port to be duplicated and sent to a designated mirror port.
Port mirroring can be used to monitor Ethernet traffic on the
designated source port using the assigned mirror port.

TM

(Remote Monitoring Using OPC Technology)

N-View OPC Switch Monitoring (W ith -A or -N Option Only)

The N-TRON N-V iew OLE for Process Control (OPC) Server
Software can be combined with popular HMI software
packages to add network traffic monitoring, trending and
alarming to any application using N-TRON switches
configured with the N-View option. N-TRON's N-V iew OPC
Server collects 41 different traffic variables per port and 5
system level variables per switch. This information can
provide a complete overview of the network load, service
quality, and packet traf fic. OPC client software can use N-V iew
OPC Server data to resolve network problems quickly and
improve system reliability.

Industrial Packaging and Specifications

The N-TRON 509FX is designed to operate in industrial
environments. It is housed in a rugged steel enclosure that can
be DIN-RAIL or Panel Mounted. Optional kits are available
for rackmount applications. Like all N-TRON switches, the
509FX comes standard with extended temperature ratings,
extended shock and vibration specs, redundant power inputs,
and a high MTBF (greater than 2M hours).

Ease of Use

The N-TRON

509FX requires no setup unless the advanced

port functions are utilized. The eight 10/100BaseTX ports are
auto sensing and auto configuring. Each copper port is
automatically negotiated for maximum speed and performance
by default. The fiber optic uplink port supports full 200Mb/s
communications via 100BaseFX. Bi-color LED's are
provided to display the link status, link speed and activity of
each port as well as power on/off status.

Performance

The N-TRON

509FX uses "state of the art" IEEE 802.3 Fast

Ethernet 10/100BaseTX switching technology. This eliminates
network collisions and increases network determinism. 4,000
MAC addresses are supported enabling sophisticated and
complex network architectures. A high speed processor and
backplane allows wire speed capability on all ports
simultaneously.

509FX Industrial Ethernet Switch Ordering Information

509FX-A-XX-S Eight 10/100BaseTX Ports, One Multimode 100BaseFX Fiber Optic Port
509FXE-A-XX-YY Eight 10/100BaseTX Ports, One Singlemode 100BaseFX Fiber Optic Port

Where: A = A for Advanced Management Features,

or N for N-View,and Blank Otherwise, N-View included in -A;
XX = ST or SC, YY = 15, 40 or 80 for singlemode, blank for multimode
S = Standard Temperature Rating -20ºC to 70ºC, Blank for -40ºC to 85ºC

Specifications

Switch Properties

Number of MAC Addresses: 4,000
Aging Time: 300
Latency Typ.: 2.1 µs
Backplane Speed: 2.6Gb/s
Switching Method: Store & Forward

Physical

Height: 2.3"
Width: 5.6"
Depth: 3.4"
Weight: 1.58 lbs
Din-Rail: 35mm

Fiber Transceiver Characteristics

Fiber Length:
TX Power Min: -19dBm -15dBm -5dBm -5dBm
RX Sensitivity Max: -32dBm -29dBm -34dBm -34dBm
Wavelength: 1310nm 1310nm 1310nm 1550nm

Connectors

10/100BaseTX: Eight (8) RJ-45 Copper Ports
100BaseFX: One (1) SC or ST Duplex Port

Serial Configuration Port

Com Parameters: 9600,n,8,1

2km* 15km** 40km** 80km**

* Multimode Fiber Optic Cable
** Singlemode Fiber Optic Cable

Electrical

Redundant Input Voltage: 10-30 VDC
Input Current: 200 mA@24V
Inrush: 8.5Amp/0.7ms@24V

Environmental

Operating and Storage Temp: -20ºC to 70ºC (Standard)

-40ºC to 85ºC (Extended)

Operating Humidity: 10% to 95%

(Non Condensing)

Operating Altitude: 0 to 10,000 ft.

Shock and Vibration (bulkhead mounting)

Shock: 200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial

Reliability

MTBF: >2Million Hours

Network Media

10BaseT: >Cat3 Cable
100BaseTX: >Cat5 Cable

100BaseFX

Multimode: 50-62.5/125µm
Singlemode: 7-10/125µm

Recommended Wiring Clearance

Front: 4" (10.16 cm)
Side: 1" (2.54 cm)

Regulatory Approvals

FCC Part 15 Class A, UL Listed 1604 (US & Canada)
CLASS I, DIV 2, GROUPS A,B,C,D,T4A,
ATEX Zone 2, Category 3G, II 3G Ex nA IIC (0316686U)
CE: EN61000-6-2,4, EN55011, EN61000-4-2,3,4,5,6,
GOST-R Certified, RoHS Compliant

Contact Information

N-TRON Corp.
820 S. University Blvd.,
Suite 4E
Mobile, AL 36609 USA
TEL: [phone]

FAX: [phone]
Website: www.n-tron.com

Email: [e-mail]

N-TRON Europe GmbH
Alte Steinhauserstr 19
6330 Cham / Zg
Switzerland
TEL: [phone]

FAX: [phone]

REV 080618

® 2008 N-TRON,Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identification purposes only and

may be trademarks and/or registered trademarks of their respective company. Specifications subject to change without notice. Printed in USA.