300 Series
Media Converter &
Industrial Ethernet Switches
Installation
Guide
12/29/2005
1
Industrial Ethernet Switch Installation Guide
302MC-XX
302MCE-XX-YY
304TX
305FX-XX
305FXE-XX-YY
306TX
306FX2-XX
306FXE2-XX-YY
308TX
Where: XX = ST or SC and YY = -15, -40, or -80
12/29/2005
2
Copyright, © N-TRON Corp., 2005
820 S. University Blvd., Suite 4E
Mobile, AL 36609 USA
All rights reserved. Reproduction, adaptation, or translation without prior written permission from N-TRON Corp. is prohibited,
except as allowed under copyright laws.
Ethernet is a registered trademark of Xerox Corporation. All other product names, company names, logos or other designations
mentioned herein are trademarks of their respective owners.
The information contained in this document is subject to change without notice. N-TRON Corp. makes no warranty of any kind
with regard to this material, including, but not limited to, the implied warranties of merchantability or fitness for a particular
purpose. In no event shall N-TRON Corp. be liable for any incidental, special, indirect, or consequential damages whatsoever
included but not limited to lost profits arising out of errors or omissions in this manual or the information contained herein.
Warning
Do not perform any services on the unit unless qualified to do so. Do not substitute unauthorized parts or make unauthorized
modifications to the unit.
Do not operate the unit with the top cover removed, as this could create a shock or fire hazard.
Do not block the air vents on the sides or the top of the unit.
Do not operate the equipment in the presence of flammable gasses or fumes. Operating electrical equipment in such an
environment constitutes a definite safety hazard.
12/29/2005
3
Safety Warnings
ELECTRICAL SAFETY
WARNING: Disconnect the power cable before removing the enclosure top.
WARNING: Do not operate the unit with the top cover removed.
WARNING: Do not work on equipment or cables during periods of lightning activity.
WARNING: Do not perform any services on the unit unless qualified to do so.
WARNING: Do not block the air vents.
WARNING: Observe proper DC Voltage polarity when installing power input cables. Reversing voltage polarity can cause
permanent damage to the unit and void the warranty.
LASER SAFETY (FXE Products Only)
WARNING: CLASS 1 Laser Product, Do not stare into the laser
12/29/2005
4