N-TRON 1002MC User Manual

The
1002MC
is an unmanaged 10/100/1000BaseT to 1000BaseSX/LX Industrial Media Converter. It is housed in a hardened, metal, DIN-Rail enclosure, and is designed for use in industrial data acquisition, control, and Ethernet I/O applications.
PRODUCT FEATURES
• Compact Size, Smaller Footprint
• Unmanaged Operation
• Full IEEE 802.3, 802.3u, 802.3z, and 802.3ab Compliance
• Converts 10/100/1000BaseT to 1000BaseSX/LX
• Choose from Multimode or Singlemode LC Style SFP (Mini-GBIC) Gigabit Fiber Transceivers
• Extended Environmental Specifications
• -40ºC to 85ºC Operating Temperature
• >2M Hours MTBF
• RJ-45 Port Supports Full/Half Duplex Operation
• Up to 2.0 Gb/s Maximum Throughput
• Supports up to 1,024 MAC Addresses
• Store-and-forward Technology
• RJ-45 Port Auto Senses Speed and Flow Control
• Full Wire Speed Communications
• MDIX Auto Cable Sensing (RJ-45)
• Hardened Metal DIN-Rail Enclosure
• LED Link/Activity Status Indication
• Redundant Power Inputs (10-30 VDC)
PRODUCT OVERVIEW
The
N-TRON
®
1002MC
Industrial Media Converter is designed to allow the connection of 10/100/ 1000BaseT Ethernet devices to your 1000BaseSX/ LX fiber cabling infrastructure.
The
1002MC
provides one RJ-45 auto sensing 10/100/1000BaseT port and one 1000BaseSX/LX SFP port. The RJ-45 port is full/half duplex capable, using "state of the art" Ethernet switching technology. The
1002MC
auto-negotiates the speed and flow control capabilities of the copper port connection, and configures itself automatically. The 1000BaseSX/LX fiber optic port utilizes industry standard SFP transceivers with LC style connectors and is configured for full duplex operation. Both multimode and singlemode fiber models are available.
Since the
1002MC
uses switching technology,
unlike most media converters, you can connect your
10Mbps devices today and upgrade them to 1000Mbps tomorrow. The switching fabric simply scales up or down automatically to match your specific network environment.
The
1002MC
supports up to 1,024 MAC addresses, thus enabling these products to support extremely sophisticated and complex network architectures.
The
N-TRON 1002MC
is well suited to convert 10/100/1000 BaseT industrial devices to fiber, allowing you to take advantage of your fiber based infrastructure and it's inherent advantages. Compared to copper based systems, fiber provides increased noise immunity and longer cable lengths.
The
1002MC
is truly engineered to withstand the extremes of the industrial environments and carry an impressive operating temperature rating of -40ºC to 85ºC. For cost savings and convenience the media converter can be DIN-Rail mounted alongside Ethernet I/O or other Industrial Equipment.
The unique compact size provides a smaller footprint, conserving space in the most critical dimension. In addition, as with other DIN-Rail devices, the
1002MC
can be panel mounted by using our 1000-PM kit.
To increase reliability, the
1002MC
contains redundant power inputs. LEDs are provided to display the link status and activity of each port, as well as power.
BENEFITS SPECIFICATIONS
Industrial Media Converter
Compact Size, Smaller Footprint
Converts 10/100/1000BaseT to 1000BaseSX/LX
High Reliability/Availability
Extended Environmental Specifications
Hardened Metal DIN-Rail Enclosure
High Performance
High MTBF >2M Hours (measured)
ESD Protection Diodes on RJ-45 Ports
Surge Protection Diodes on Power Inputs
Physical
Height: 4.30" (10.92 cm) Width: 1.00" (2.54 cm) Depth Incl. DIN-Rail Clip: 3.91" (9.94 cm) Weight: 0.60 lbs. (0.22 kg) DIN-Rail: 35mm
Electrical
Input Voltage: 10-30 VDC Input Current: 200mA@24V Inrush: 13Amp/0.8ms@24V
Ease of Use
Plug & Play Operation
RJ-45 Auto Sensing 10/100/1000BaseT Port
RJ-45 Port Auto Senses Duplex, Speed, and Cable Type
Compact DIN-Rail Package
Increased Performance
Full Wire Speed Capable
1000BaseSX/LX Fiber Uplink
Full Duplex Capable
Eliminates Network Collisions
Increases Network Determinism
Contact Information
N-TRON Corp. 820 S. University Blvd., Suite 4E Mobile, AL 36609 USA TEL: (251) 342-2164
FAX: (251) 342-6353 Website: www.n-tron.com
Email: N-Tron_Info@n-tron.com
N-TRON Europe GmbH Alte Steinhauserstr 19 6330 Cham / Zg Switzerland TEL: +41 41 7406636
FAX: +41 41 7406637
Ordering Information
1002MC-SX 1000BaseSX multimode fiber 1002MC-LX-ZZ 1000BaseLX singlemode fiber
1000-PM Panel Mount Kit
NTPS-24-1.3 DIN-Rail Power Supply
24V@1.3 Amp
Where "ZZ" is: 10 for 10km max. fiber segment length
40 for 40km max. fiber segment length 70 for 70km max. fiber segment length
Environmental
Operating Temperature: -40 Storage Temperature: -40
o
C to 85oC
o
C to 85oC
Operating Humidity: 10% to 95%
(Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Network Media
10BaseT: >Cat3 Cable 100BaseT: >Cat5 Cable 1000BaseT: >Cat5e Cable 1000BaseSX Multimode: 50-62.5/125µm 1000BaseLX Singlemode: 7-10/125µm
SFP Gigabit Fiber Transceiver Characteristics
Fiber Length
TX Power Min
RX Sensitivity Max
Wavelength
Assumed Fiber Loss
Laser Type
550m for 50/125µm* 10km** 40km** 70km** 275m for 62.5/125µm*
-9.5dBm -9.5dBm -2dBm 0dBm
-17dBm -20dBm -22dBm -23dBm
850nm 1310nm 1310nm 1550nm
3.5 to 3.75 .45 .35 .25 dB/km dB/km dB/km dB/km
VCSEL FP DFB DFB
* SX Fiber Optic Cable
** LX Fiber Optic Cable
Connectors
10/100/1000BaseT: One (1) RJ-45 TX Port 1000BaseSX/LX SFP: One (1) SFP LC Duplex
Gigabit Fiber Port
Recommended Wiring Clearance
Front: 5" (12.70 cm) Top: 1" (2.54 cm)
Regulatory Approvals
FCC Title 47 Part 15 Class A, CE: EN61000-6-2,4, EN55011, EN61000-4-2,3,4,5,6 Designed to comply with: UL 1604 (US and Canada), CLASS I, DIV 2, GROUPS A,B,C,D,T4A, IEEE 1613 for Electric Utility Substations, ABS Type Approval for Shipboard Applications, and NEMA TS1/TS2 for Traffic Control Equipment
REV 080314
® 2008 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of their respective company. Specifications subject to change without notice. Printed in USA.
Loading...