NSC LMH6654MWC, LMH6654MF, LMH6654MDC, LMH6654MAX, LMH6654MFX Datasheet

LMH6654/55
Single/Dual Low Power, 250 MHz, Low Noise Amplifiers

General Description

The LMH6654/55 single and dual high speed, voltage feed­back amplifiers are designed to have unity-gain stable op­eration with a bandwidth of 250MHz. They operate from

±

2.5V to±6V and each channel consumes only 4.5mA. The
amplifiers feature very low voltage noise and wide output
swing to maximize signal-to-noise ratio.

The LMH6654/55 have a true single supply capability with
input common mode voltage range extending 150 mV below
negative rail and within 1.3V of the positive rail.

LMH6654/55 high speed and low power combination make
these products an ideal choice for many portable, high
speed application where power is at a premium.

The LMH6654 is packaged in SOT23-5 and SOIC-8. The
LMH6655 is packaged in MSOP-8 and SOIC-8.

The LMH6654/55 are built on National’s Advance VIP10

™

(Vertically Integrated PNP) complementary bipolar process.

Features

(VS=±5V, TJ= 25˚C, Typical values unless specified).

n Voltage feedback architecture
n Unity gain bandwidth 250MHz
n Supply voltage range

±

2.5V to±6V

n Slew rate 200V/µsec
n Supply current 4.5mA/channel
n Input common mode voltage −5.15V to +3.7V
n Output voltage swing (R

L

= 100Ω) −3.6V to 3.4V

n Input voltage noise 4.5nV/

n Input current noise 1.7pA/
n Settling Time to 0.01% 25ns

Applications

n ADC drivers
n Consumer video
n Active filters
n Pulse delay circuits
n xDSL receiver
n Pre-amps

Typical Performance Characteristics

Input Voltage Noise vs. Frequency Closed Loop Gain vs. Frequency

20016560 20016558

August 2001

LMH6654/55 Single/Dual Low Power, 250 MHz, Low Noise Amplifiers

© 2001 National Semiconductor Corporation DS200165 www.national.com

Absolute Maximum Ratings (Note 1)

If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.

ESD Tolerance (Note 2)

Human Body Model 2kV
Machine Model 200V

V

IN

Differential

±

1.2V
Output Short Circuit Duration (Note 3)
Supply Voltage (V

+−V−

) 13.2V

Voltage at Input pins V

+

+0.5V, V−−0.5V
Storage Temperature Range −65˚C to +150˚C
Junction Temperature (Note 4) +150˚C

Soldering Information

Infrared or Convection (20 sec.) 235˚C
Wave Soldering (10 sec.) 260˚C

Operating Ratings (Note 1)

Supply Voltage (V

+-V−

)

±

2.5V to±6.0V
Junction Temperature Range −40˚C to +85˚C
Thermal Resistance (θ

JA

)
8-Pin SOIC 172˚C/W
8-Pin MSOP 235˚C/W
5-Pin SOT-23 265˚C/W

±

5V Electrical Characteristics

Unless otherwise specified, all limits guaranteed for TJ= 25˚C, V+= +5V, V−= −5V, VCM= 0V, AV= +1, RF=25Ωfor gain =
+1, R

F

= 402Ω for gain = ≥ +2, and RL= 100Ω. Boldface limits apply at the temperature extremes.

Symbol Parameter Conditions Min

(Note 6)

Typ

(Note 5)

Max

(Note 6)

Units

Dynamic Performance

f

CL

Close Loop Bandwidth AV= +1 250

MHz

A

V

= +2 130

A

V

=+5 52

A

V

= +10 26

GBWP Gain Bandwidth Product A

V

≥ +5 260 MHz

Bandwidth for 0.1dB Flatness A

V

+1 18 MHz
φm Phase Margin 50 deg
SR Slew Rate (Note 8) A

V

= +1, VIN=2V

PP

200 V/µs

T

S

Settling Time

0.01%

AV= +1, 2V Step 25 ns

0.1% 15 ns

t

r

Rise Time AV= +1, 0.2V Step 1.4 ns

t

f

Fall Time AV= +1, 0.2V Step 1.2 ns

Distortion and Noise Response

e

n

Input Referred Voltage Noise f ≥ 0.1 MHz 4.5 nV/

i

n

Input-Referred Current Noise f ≥ 0.1 MHz 1.7 pA/
Second Harmonic Distortion AV= +1, f = 5MHz −80

dBc

Third Harmonic Distortion V

O

=2VPP,RL= 100Ω −85

X

t

Crosstalk (for LMH6655 only) Input Referred, 5MHz,

Channel-to-Channel

−80 dB

DG Differential Gain A

V

= +2, NTSC, RL= 150Ω 0.01 %

DP Differential Phase A

V

= +2, NTSC, RL= 150Ω 0.025 deg

Input Characteristics

V

OS

Input Offset Voltage VCM=0V −3

−4

±

13

4

mV

TC V

OS

Input Offset Average Drift VCM= 0V (Note 7) 6 µV/˚C

I

B

Input Bias Current VCM=0V 5 12

18

µA

I

OS

Input Offset Current VCM=0V −1

−2

0.3 1

2

µA

R

IN

Input Resistance Common- Mode 4 MΩ

Differential Mode 20 kΩ

LMH6654/55

www.national.com 2

±

5V Electrical Characteristics (Continued)

Unless otherwise specified, all limits guaranteed for TJ= 25˚C, V+= +5V, V−= −5V, VCM= 0V, AV= +1, RF=25Ωfor gain =

+1, R

F

= 402Ω for gain = ≥ +2, and RL= 100Ω. Boldface limits apply at the temperature extremes.

Symbol Parameter Conditions Min

(Note 6)

Typ

(Note 5)

Max

(Note 6)

Units

C

IN

Input Capacitance Common- Mode 1.8 pF

Differential Mode 1

CMRR Common Mode Rejection Ration Input Referred,

V

CM

=0Vto−5V

70

68

90 dB

CMVR Input Common- Mode Voltage Range CMRR ≥ 50dB −5.15 −5.0

V

3.5 3.7

Transfer Characteristics

A

VOL

Large Signal Voltage Gain VO=4VPP,RL= 100Ω 60

58

67 dB

Output Characteristics

V

O

Output Swing High No Load 3.4

3.2

3.6

V

Output Swing Low No Load −3.9 −3.7

−3.5

Output Swing High R

L

= 100Ω 3.2

3.0

3.4

Output Swing Low R

L

= 100Ω −3.6 −3.4

−3.2

I

SC

Short Circuit Current (Note 3) Sourcing, VO=0V

∆V

IN

= 200mV

145

130

280

mA

Sinking, V

O

=0V

∆V

IN

= 200mV

100

80

185

I

OUT

Output Current Sourcing, VO= +3V 80

mA

Sinking, V

O

= −3V 120

R

O

Output Resistance AV= +1, f<100kHz 0.08 Ω

Power Supply

PSRR Power Supply Rejection Ratio Input Referred ,

V

S

=±5V to±6V

60 76 dB

I

S

Supply Current (per channel) 4.5 6

7

mA

5V Electrical Characteristics

Unless otherwise specified, all limits guaranteed for TJ= 25˚C, V+= +5V, V−= −0V, VCM= 2.5V, AV= +1, RF=25Ωfor gain

= +1, R

F

= 402Ω for gain = ≥ +2, and RL= 100Ω to V+/2. Boldface limits apply at the temperature extremes.

Symbol Parameter Conditions Min

(Note 6)

Typ

(Note 5)

Max

(Note 6)

Units

Dynamic Performance

f

CL

Close Loop Bandwidth AV= +1 230

MHz

A

V

= +2 120

A

V

=+5 50

A

V

= +10 25

GBWP Gain Bandwidth Product A

V

≥ +5 250 MHz

Bandwidth for 0.1dB Flatness A

V

= +1 17 MHz
φm Phase Margin 48 deg
SR Slew Rate (Note 8) A

V

= +1, VIN=2V

PP

190 V/µs

T

S

Settling Time

0.01%

AV= +1, 2V Step 30 ns

0.1% 20 ns

LMH6654/55

www.national.com3

5V Electrical Characteristics (Continued)

Unless otherwise specified, all limits guaranteed for TJ= 25˚C, V+= +5V, V−= −0V, VCM= 2.5V, AV= +1, RF=25Ωfor gain
= +1, R

F

= 402Ω for gain = ≥ +2, and RL= 100Ω to V+/2. Boldface limits apply at the temperature extremes.

Symbol Parameter Conditions Min

(Note 6)

Typ

(Note 5)

Max

(Note 6)

Units

t

r

Rise Time AV= +1, 0.2V Step 1.5 ns

t

f

Fall Time AV= +1, 0.2V Step 1.35 ns

Distortion and Noise Response

e

n

Input Referred Voltage Noise f ≥ 0.1MHz 4.5 nV/

i

n

Input Referred Current Noise f ≥ 0.1 MHz 1.7 pA/
Second Harmonic Distortion AV= +1, f = 5MHz −65

dBc

Third Harmonic Distortion V

O

=2VPP,RL= 100Ω −70

X

t

Crosstalk (for LMH6655 only) Input Referred, 5MHz −78 dB

Input Characteristics

V

OS

Input Offset Voltage VCM= 2.5V −5

−6.5

±

25

6.5

mV

TC V

OS

Input Offset Average Drift VCM= 2.5V (Note 7) 6 µV/˚C

I

B

Input Bias Current VCM= 2.5V 6 12

18

µA

I

OS

Input Offset Current VCM= 2.5V −2

−3

0.5 2

3

µA

R

IN

Input Resistance Common- Mode 4 MΩ

Differential Mode 20 kΩ

C

IN

Input Capacitance Common- Mode 1.8 pF

Differential Mode 1

CMRR Common Mode Rejection Ration Input Referred,

V

CM

= 0V to −2.5V

70

68

90 dB

CMVR Input Common Mode Voltage Range CMRR ≥ 50dB −0.15 0

V

3.5 3.7

Transfer Characteristics

A

VOL

Large Signal Voltage Gain VO= 1.6VPP,RL= 100Ω 58

55

64 dB

Output Characteristics

V

O

Output Swing High No Load 3.6

3.4

3.75

V

Output Swing Low No Load 0.9 1.1

1.3

Output Swing High R

L

= 100Ω 3.5

3.35

3.70

Output Swing Low R

L

= 100Ω 1 1.3

1.45

I

SC

Short Circuit Current (Note 3) Sourcing , VO= 2.5V

∆V

IN

= 200mV

90

80

170

mA

Sinking, V

O

= 2.5V

∆V

IN

= 200mV

70

60

140

I

OUT

Output Current Sourcing, VO= +3.5V 30

mA

Sinking, V

O

= 1.5V 60

R

O

Output Resistance AV= +1, f<100kHz .08 Ω

Power Supply

PSRR Power Supply Rejection Ratio Input Referred ,

V

S

=±2.5V to±3V

60 75 dB

I

S

Supply Current (per channel) 4.5 6

7

mA

LMH6654/55

www.national.com 4

5V Electrical Characteristics (Continued)

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is

intended to be functional, but specificperformanceisnotguaranteed.For guaranteed specifications and the test conditions, see the Electrical Characteristics Table.

Note 2: Human body model, 1.5kΩ in series with 100pF. Machine model: 0Ω in series with 100pF.
Note 3: Continuous short circuit operation at elevated ambient temperature can result in exceeding the maximum allowed junction temperature at 150˚C.
Note 4: The maximum power dissipation is a function of T

J(MAX)

, θJAand TA. The maximum allowable power dissipation at any ambient temperature is PD=

(T

J(MAX)−TA

)/θJA. All numbers apply for packages soldered directly onto a PC board.

Note 5: Typical Values represent the most likely parametric norm.
Note 6: All limits are guaranteed by testing or statistical analysis.
Note 7: Offset voltage average drift is determined by dividing the change in V

OS

at temperature extremes into the total temperature change.

Note 8: Slew rate is the slower of the rising and falling slew rates. Slew rate is rate of change from 10% to 90% of output voltage step.

Typical Performance Characteristics T

J

= 25˚C, V+=±5V, V−= −5, RF=25Ωfor gain = +1, RF=

402Ω and for gain ≥ +2, and R

L

= 100Ω, unless otherwise specified.

Closed Loop Bandwidth (G = +1) Closed Loop Bandwidth (G = +2)

20016509 20016510

Closed Loop Bandwidth (G = +5) Closed Loop Bandwidth (G = +10)

20016511 20016512

LMH6654/55

www.national.com5

Typical Performance Characteristics T

J

= 25˚C, V+=±5V, V−= −5, RF=25Ωfor gain = +1, RF=

402Ω and for gain ≥ +2, and R

L

= 100Ω, unless otherwise specified. (Continued)

Supply Current per Channel vs. Supply Voltage Supply Current per Channel vs. Temperature

20016535 20016548

Offset Voltage vs. Supply Voltage (VCM= 0V) Offset Voltage vs. Common Mode

20016549

20016532

Offset Voltage vs. Common Mode Bias Current and Offset Voltage vs. Temperature

20016539

20016551

LMH6654/55

www.national.com 6