NSC LM285Z-2.5, LM285MX-2.5, LM285M-2.5, LM285BYZ-2.5, LM285BXM-2.5 Datasheet

LM185-2.5/LM285-2.5/LM385-2.5
Micropower Voltage Reference Diode

General Description

The LM185-2.5/LM285-2.5/LM385-2.5 are micropower
2-terminal band-gap voltage regulator diodes. Operating
over a 20 µAto20mAcurrent range, they feature exception­ally low dynamic impedance and good temperature stability.
On-chip trimming is used to provide tight voltage tolerance.
Since the LM-185-2.5 band-gap reference uses only transis­tors and resistors, low noise and good long term stability re­sult.

Careful design of the LM185-2.5 has made the device ex­ceptionally tolerant of capacitive loading, making it easy to
use in almost any reference application. The wide dynamic
operating range allows its use with widely varying supplies
with excellent regulation.

The extremely low power drain of the LM185-2.5 makes it
useful for micropower circuitry.This voltage reference can be
used to make portable meters, regulators or general purpose
analog circuitry with battery life approaching shelf life. Fur­ther, the wide operating current allows it to replace older ref­erences with a tighter tolerance part. For applications requir­ing 1.2V see LM185-1.2.

The LM185-2.5 is rated for operation over a −55˚C to 125˚C
temperature range while the LM285-2.5 is rated −40˚C to
85˚C and the LM385-2.5 0˚C to 70˚C. The LM185-2.5/
LM285-2.5 are available in a hermetic TO-46 package and
the LM285-2.5/LM385-2.5 are also available in a low-cost
TO-92 molded package, as well as S.O. and SOT-23. The
LM185-2.5 is also available in a hermetic leadless chip car­rier package.

Features

n

±

20 mV (±0.8%) max. initial tolerance (A grade)

n Operating current of 20 µA to 20 mA
n 0.6Ω dynamic impedance (A grade)
n Low temperature coefficient
n Low voltage reference— 2.5V
n 1.2V device and adjustable device also

available— LM185-1.2 series and LM185 series,
respectively

Connection Diagrams

TO-92

Plastic Package

DS005519-8

Bottom View

Order Number LM285Z-2.5,

LM285BXZ-2.5, LM285BYZ-2.5

LM385Z-2.5, LM385AXZ-2.5

LM385AYZ-2.5, LM385BZ-2.5,

LM385BXZ-2.5 or LM385BYZ-2.5

See NS Package Number Z03A

SO Package

DS005519-11

Order Number LM285M-2.5,

LM285BXM-2.5, LM285BYM-2.5

LM385M-2.5, LM385BM-2.5

LM385BXM-2.5 or LM385BYM-2.5

See NS Package Number M08A

SOT-23

DS005519-29

*

Pin 3 is attached to the Die Attach Pad (DAP) and should be connected to Pin 2 or left floating.

Order Number LM385M3-2.5

See NS Package Number MA03B

December 1999

LM185-2.5/LM285-2.5/LM385-2.5 Micropower Voltage Reference Diode

© 1999 National Semiconductor Corporation DS005519 www.national.com

Connection Diagrams (Continued)

LCC

Leadless Chip Carrier

DS005519-14

Order Number LM185E-2.5/883

See NS Package Number E20A

TO-46

Metal Can Package

DS005519-13

Bottom View

Order Number LM185H-2.5,

LM185H-2.5/883, LM185BXH-2.5,

LM185BXH-2.5/883, LM185BYH-2.5,

LM185BYH2.5/883, LM285H-2.5,

or LM285BYH-2.5

See NS Package Number H02A

LM185-2.5/LM285-2.5/LM385-2.5

www.national.com 2

Absolute Maximum Ratings (Notes 1, 2)

If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.

Reverse Current 30 mA
Forward Current 10 mA
Operating Temperature Range (Note 3)

LM185-2.5 −55˚C to + 125˚C
LM285-2.5 −40˚C to + 85˚C
LM385-2.5 0˚C to 70˚C

Storage Temperature −55˚C to + 150˚C

Soldering Information

TO-92 Package (10 sec.) 260˚C
TO-46 Package (10 sec.) 300˚C
SO and SOT Package

Vapor Phase (60 sec.) 215˚C
Infrared (15 sec.) 220˚C

See AN-450 “Surface Mounting Methods and Their Effect on
Product Reliability” for other methods of soldering surface
mount devices.

Electrical Characteristics

(Note 4)

Parameter Conditions Typ

LM385A-2.5

Units

(Limits)

LM385AX-2.5
LM385AY-2.5

Tested Design

Limit Limit

(Note 5) (Note 6)

Reverse Breakdown I

R

=

100 µA 2.500 2.480 V(Min)

Voltage 2.520 V(Max)

2.500 2.470 V(Min)

2.530 V(Max)

Minimum Operating 12 18 20 µA
Current (Max)
Reverse Breakdown I

MIN

≤ IR≤ 1mA 1 1.5 mV
Voltage Change with (Max)
Current 1 mA ≤ I

R

≤ 20 mA 10 20 mV

(Max)

Reverse Dynamic I

R

=

100 µA, 0.2 0.6 Ω
Impedance f=20 Hz 1.5
Wideband Noise (rms) I

R

=

100 µA 120 µV

10 Hz ≤ f ≤ 10 kHz

Long Term Stability I

R

=

100 µA,

T=1000 Hr, 20 ppm
T

A

=

25˚C

±

0.1˚C

Average Temperature I

MIN

≤ IR≤ 20 mA

Coefficient (Note 7) X Suffix 30 ppm/˚C

Y Suffix 50 (Max)
All Others 150

LM185-2.5/LM285-2.5/LM385-2.5

www.national.com3

Electrical Characteristics (Continued)

LM185-2.5
LM185BX-2.5 LM385B-2.5
LM185BY-2.5 LM385BX-2.5 LM385-2.5 Units

LM285-2.5 LM385BY-2.5 (Limit)

Parameter Conditions Typ LM285BX-2.5

LM285BY-2.5

Tested Design Tested Design Tested Design

Limit Limit Limit Limit Limit Limit

(Note 5)
(Note 8)

(Note 6) (Note 5) (Note 6) (Note 5) (Note 6)

Reverse Breakdown T

A

=

25˚C, 2.5 2.462 2.462 2.425 V(Min)

Voltage 20 µA ≤ I

R

≤ 20 mA 2.538 2.538 2.575 V(Max)

Minimum Operating
Current

13 20 30 20 30 20 30 µA

(Max)

LM385M3-2.5 15 20

Reverse Breakdown
Voltage Change with
Current

20 µA ≤ I

R

≤ 1mA 1 1.5 2.0 2.5 2.0 2.5 mV

(Max)

1mA≤I

R

≤20 mA 10 20 20 25 20 25 mV

(Max)

Reverse Dynamic I

R

=

100 µA, 1 Ω
Impedance f=20 Hz
Wideband Noise (rms) I

R

=

100 µA, 120 µV

10 Hz ≤ f ≤ 10 kHz

Long Term Stability I

R

=

100 µA,

T=1000 Hr, 20 ppm
T

A

=

25˚C

±

0.1˚C

Average Temperature I

R

=

100 µA
Coefficient (Note 7) X Suffix 30 30 ppm/˚C

Y Suffix 50 50 ppm/˚C
All Others 150 150 150 ppm/˚C

(Max)

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is in­tended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The
guaranteed specifications apply only for the test conditions listed.

Note 2: Refer to RETS185H-2.5 for military specifications.
Note 3: For elevated temperature operation, T

J MAX

is:
LM185 150˚C
LM285 125˚C
LM385 100˚C

Thermal Resistance TO-92 TO-46 SO-8 SOT-23

θ

ja

(Junction to Ambient) 180˚C/W (0.4" Leads) 440˚C/W 165˚C/W 283˚C/W

170˚C/W (0.125" Leads)

θ

jc

(Junction to Case) N/A 80˚C/W N/A N/A

Note 4: Parameters identified with boldface type apply at temperature extremes. All other numbers apply at T

A

=

T

J

=

25˚C.

Note 5: Guaranteed and 100%production tested.
Note 6: Guaranteed, but not 100%production tested. These limits are not used to calculate average outgoing quality levels.
Note 7: The average temperature coefficient is defined as the maximum deviation of reference voltage at all measured temperatures between the operating T

MAX

and T

MIN

, divided by T

MAX–TMIN

. The measured temperatures are −55˚C, −40˚C, 0˚C, 25˚C, 70˚C, 85˚C, 125˚C.

Note 8: A military RETS electrical specification available on request.

LM185-2.5/LM285-2.5/LM385-2.5

www.national.com 4

Typical Performance Characteristics

Applications

LM385-2.5 Applications

Reverse Characteristics

DS005519-15

Reverse Characteristics

DS005519-16

Forward Characteristics

DS005519-17

Temperature Drift

DS005519-18

Reverse Dynamic
Impedance

DS005519-19

Reverse Dynamic
Impedance

DS005519-20

Noise Voltage

DS005519-21

Filtered Output Noise

DS005519-22

Response Time

DS005519-23

Wide Input Range Reference

DS005519-12

Micropower Reference from 9V Battery

DS005519-2

LM185-2.5/LM285-2.5/LM385-2.5

www.national.com5