NSC DS2003TN, DS2003TMX, DS2003TM, DS2003CN, DS2003CMX Datasheet

...
DS2003 High Current/Voltage Darlington Drivers
General Description
The DS2003 is comprised of seven high voltage, high cur­rent NPN Darlington transistor pairs. All units feature com­mon emitter, open collector outputs.To maximize their effec­tiveness, these units contain suppression diodes for inductive loads and appropriate emitter base resistors for leakage.
The DS2003 has a series base resistor to each Darlington pair,thus allowing operation directly with TTL or CMOS oper­ating at supply voltages of 5.0V.
LEDs. Applications requiring sink currents beyond the capa­bility of a single output may be accommodated by paralleling the outputs.
Features
n Seven high gain Darlington pairs n High output voltage (V
CE
=
50V)
n High output current (I
C
=
350 mA)
n TTL, PMOS, CMOS compatible n Suppression diodes for inductive loads n Extended temperature range
Connection Diagram
Order Numbers
N Package
Number
N16E
M Package
Number
M16A
DS2003TN DS2003TM
DS2003CN DS2003CM
16-Lead DIP
DS009647-1
Top View
January 2000
DS2003 High Current/Voltage Darlington Drivers
© 2000 National Semiconductor Corporation DS009647 www.national.com
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications.
Storage Temperature Range −65˚C to +150˚C Operating Temperature Range
DS2003TN, DS2003TM −40˚C to +105˚C DS2003CN, DS2003CM 0˚C to +85˚C
Lead Temperature
Soldering, 10 seconds 265˚C
Maximum Power Dissipation
*
at TA=
25˚C
N16E Package 1330 mW
M16A Package 770 mW Input Voltage 30V Output Voltage 55V Emitter-Base Voltage 6.0V Continuous Collector Current 500 mA Continuous Base Current 25 mA
Note: *Derate N16E package 13.3 mW/˚C for TAabove 25˚C. Derate M16A
package 7.7 mW/˚C for T
A
above 25˚C.
Electrical Characteristics
T
A
=
25˚C, unless otherwise specified (Note 2)
Symbol Parameter Conditions Min Typ Max Units
I
CEX
Output Leakage Current
T
A
=
25˚C, V
CE
=
50V
(Figure 1 )
20
T
A
=
85˚C, V
CE
=
50V
(Figure 1 )
for DS2003CN, DS2003CM 100 µA
T
A
=
105˚C, V
CE
=
50V
(Figure 1 )
for DS2003TN, DS2003TM 150
V
CE(Sat)
Collector-Emitter Saturation Voltage
I
C
=
350 mA, I
B
=
500 µA
(Figure 3 )
(Note 3) 1.25 1.6
VI
C
=
200 mA, I
B
=
350 µA
(Figure 3 )
1.1 1.3
I
C
=
100 mA, I
B
=
250 µA
(Figure 3 )
0.9 1.1
I
I(ON)
Input Current V
I
=
3.85V
(Figure 4 )
0.93 1.35 mA
I
I(OFF)
Input Current (Note 4)
T
A
=
85˚C for DS2003CN, DS2003CM
I
C
=
500 µA
(Figure 5 )
50 100 µA
V
I(ON)
Input Voltage (Note 5)
V
CE
=
2.0V, I
C
=
200 mA
(Figure 6 )
2.4 VV
CE
=
2.0V, I
C
=
250 mA
(Figure 6 )
2.7
V
CE
=
2.0V, I
C
=
300 mA
(Figure 6 )
3.0
C
I
Input Capacitance 15 30 pF
t
PLH
Turn-On Delay 0.5 VIto 0.5 V
O
1.0 µs
t
PHL
Turn-Off Delay 0.5 VIto 0.5 V
O
1.0 µs
I
R
Clamp Diode Leakage Current
V
R
=
50V
(Figure 7 )
T
A
=
25˚C 50 µA
T
A
=
85˚C 100 µA
V
F
Clamp Diode Forward Voltage
I
F
=
350 mA
(Figure 8 )
1.7 2.0 V
Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The tables of “Electrical Characteristics” provide conditions for actual device operation.
Note 2: All limits apply to the complete Darlington series except as specified for a single device type. Note 3: Under normal operating conditions these units will sustain 350 mA per output with V
CE (Sat)
=
1.6V at 70˚C with a pulse width of 20 ms and a duty cycle of
30%. Note 4: The I
I(OFF)
current limit guaranteed against partial turn-on of the output.
Note 5: The V
I(ON)
voltage limit guarantees a minimum output sink current per the specified test conditions.
DS2003
www.national.com 2
Typical Performance Characteristics
Equivalent Circuits
Collector Current vs
Saturation Voltage
DS009647-18
Collector Current vs Input Current
DS009647-19
Input Current vs Input Voltage
DS009647-20
Peak Collector Current vs Duty Cycle and Number of Outputs (Molded Package)
DS009647-22
Peak Collector Current vs Duty Cycle and Number of Outputs (Ceramic Package)
DS009647-23
DS009647-3
DS2003
www.national.com3
Test Circuits
DS009647-7
FIGURE 1.
DS009647-8
FIGURE 2.
DS009647-9
FIGURE 3.
DS009647-10
FIGURE 4.
DS009647-11
FIGURE 5.
DS009647-12
FIGURE 6.
DS009647-13
FIGURE 7.
DS009647-14
FIGURE 8.
DS2003
www.national.com 4
Physical Dimensions inches (millimeters) unless otherwise noted
Surface Mount Package (M)
Order Number DS2003CM, DS2003TM
NS Package Number M16A
Molded Dual-In-Line Package (N)
Order Number DS2003CN, DS2003TN
NS Package Number N16E
DS2003
www.national.com5
Notes
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
National Semiconductor Corporation
Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com
National Semiconductor Europe
Fax: +49 (0) 1 80-530 85 86
Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80
National Semiconductor Asia Pacific Customer Response Group
Tel: 65-2544466 Fax: 65-2504466 Email: sea.support@nsc.com
National Semiconductor Japan Ltd.
Tel: 81-3-5639-7560 Fax: 81-3-5639-7507
www.national.com
DS2003 High Current/Voltage Darlington Drivers
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
Loading...