Nova-Tech H40404-1000 User Manual

I N S T R U C T I O N S

For Mounting Flowmeter onto

Bench Mount

Catalog No. 94040-9000

Threaded

Ends

Spirit Level

Leveling

Screws (3)

1"

7"

11

⁄32"

Equilateral

Triangle Base

1. Remove the hex nut from the threaded inlet located at the rear
of the Flowmeter.

2. Place the mounting bracket, which is supplied with the mounting
kit, over the threaded end.

3. Replace the hex nut.

4. Remove the screw from the bottom of the bracket, line up the hole in
the bracket with the hole in the plastic triangle, and screw into place.

661 Route 23 South, Wayne, NJ 07470-6814 USA

TEL: 1-800-4BEL-ART • FAX: [phone] • www.belart.com

940401042 01/03

Scienceware
Bel-Art Products assumes no obligation or liability for any advice furnished by it, or for results obtained with respect to
these products. All such advice is given and accepted at the buyer’s risk.

®

, is a reg. TM of Bel-Art Products