Novak 55-5860-1.2 User Manual

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings:

outside of the bearing using a clean cloth. Apply oil along inner edge of shield to allow oil to penetrate.

Sealed Bearings: Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife along the inner edge of the rubber seals to remove them from the bearing. Clean exposed bearings with solvent to remove any debris and old oil/grease. Apply a drop of oil directly to each ball. Replace cleaned bearing seals

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin contact and always observe good housekeeping and personal hygiene measures such as washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

Wipe any dirt and debris build-up from the

(or a mini ﬂat blade screwdriver)

(ﬂatten seals if they got bent during removal)

to gently pry

.

(949) 916-6044 • Monday-Thursday

www .team nova k.com www .team nova k.com www .team nova k.com

NOVAK SPEED LUBE

High-Speed Bearing Oil With Penetrative Additives

NOVAK SPEED LUBE

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings:

outside of the bearing using a clean cloth. Apply oil along inner edge of shield to allow oil to penetrate.

Sealed Bearings: Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife along the inner edge of the rubber seals to remove them from the bearing. Clean exposed bearings with solvent to remove any debris and old oil/grease. Apply a drop of oil directly to each ball. Replace cleaned bearing seals

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin contact and always observe good housekeeping and personal hygiene measures such as washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

Wipe any dirt and debris build-up from the

(or a mini ﬂat blade screwdriver)

(ﬂatten seals if they got bent during removal)

(949) 916-6044 • Monday-Thursday

to gently pry

.

High-Speed Bearing Oil With Penetrative Additives

NOVAK SPEED LUBE

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings:

outside of the bearing using a clean cloth. Apply oil along inner edge of shield to allow oil to penetrate.

Sealed Bearings: Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife along the inner edge of the rubber seals to remove them from the bearing. Clean exposed bearings with solvent to remove any debris and old oil/grease. Apply a drop of oil directly to each ball. Replace cleaned bearing seals

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin contact and always observe good housekeeping and personal hygiene measures such as washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

Wipe any dirt and debris build-up from the

(or a mini ﬂat blade screwdriver)

(ﬂatten seals if they got bent during removal)

(949) 916-6044 • Monday-Thursday

to gently pry

.

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings:

outside of the bearing using a clean cloth. Apply oil along inner edge of shield to allow oil to penetrate.

Sealed Bearings: Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife along the inner edge of the rubber seals to remove them from the bearing. Clean exposed bearings with solvent to remove any debris and old oil/grease. Apply a drop of oil directly to each ball. Replace cleaned bearing seals

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin contact and always observe good housekeeping and personal hygiene measures such as washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

Wipe any dirt and debris build-up from the

(or a mini ﬂat blade screwdriver)

(ﬂatten seals if they got bent during removal)

to gently pry

.

(949) 916-6044 • Monday-Thursday

www .team nova k.com www .team nova k.com www .team nova k.com

NOVAK SPEED LUBE

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings:

outside of the bearing using a clean cloth. Apply oil along inner edge of shield to allow oil to penetrate.

Sealed Bearings: Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife along the inner edge of the rubber seals to remove them from the bearing. Clean exposed bearings with solvent to remove any debris and old oil/grease. Apply a drop of oil directly to each ball. Replace cleaned bearing seals

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin contact and always observe good housekeeping and personal hygiene measures such as washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

Wipe any dirt and debris build-up from the

(or a mini ﬂat blade screwdriver)

(ﬂatten seals if they got bent during removal)

to gently pry

.

(949) 916-6044 • Monday-Thursday

www .team nova k.com www .team nova k.com www .team nova k.com

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings:

outside of the bearing using a clean cloth. Apply oil along inner edge of shield to allow oil to penetrate.

Sealed Bearings: Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife along the inner edge of the rubber seals to remove them from the bearing. Clean exposed bearings with solvent to remove any debris and old oil/grease. Apply a drop of oil directly to each ball. Replace cleaned bearing seals

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin contact and always observe good housekeeping and personal hygiene measures such as washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

Wipe any dirt and debris build-up from the

(or a mini ﬂat blade screwdriver)

(ﬂatten seals if they got bent during removal)

to gently pry

.

(949) 916-6044 • Monday-Thursday

NOVAK SPEED LUBE

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

NOVAK SPEED LUBE

Shielded Bearings:

outside of the bearing using a clean cloth. Apply oil along inner edge of shield to allow oil to penetrate.

Sealed Bearings: Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife along the inner edge of the rubber seals to remove them from the bearing. Clean exposed bearings with solvent to remove any debris and old oil/grease. Apply a drop of oil directly to each ball. Replace cleaned bearing seals

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin contact and always observe good housekeeping and personal hygiene measures such as washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

Wipe any dirt and debris build-up from the

(or a mini ﬂat blade screwdriver)

(ﬂatten seals if they got bent during removal)

(949) 916-6044 • Monday-Thursday

to gently pry

.

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

Shielded Bearings:

outside of the bearing using a clean cloth. Apply oil along inner edge of shield to allow oil to penetrate.

Sealed Bearings: Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife along the inner edge of the rubber seals to remove them from the bearing. Clean exposed bearings with solvent to remove any debris and old oil/grease. Apply a drop of oil directly to each ball. Replace cleaned bearing seals

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin contact and always observe good housekeeping and personal hygiene measures such as washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

Wipe any dirt and debris build-up from the

(or a mini ﬂat blade screwdriver)

(ﬂatten seals if they got bent during removal)

to gently pry

.

(949) 916-6044 • Monday-Thursday

NOVAK SPEED LUBE

High-Speed Bearing Oil With Penetrative Additives

American Made • 4-Times Filtered For Purity

For best results, apply to thoroughly cleaned bearings.

NOVAK SPEED LUBE

Shielded Bearings:

outside of the bearing using a clean cloth. Apply oil along inner edge of shield to allow oil to penetrate.

Sealed Bearings: Wipe dirt & debris from the outside of bearing.

Use the tip of a hobby knife along the inner edge of the rubber seals to remove them from the bearing. Clean exposed bearings with solvent to remove any debris and old oil/grease. Apply a drop of oil directly to each ball. Replace cleaned bearing seals

Precautions should be taken to avoid contact with eyes or mouth. Avoid prolonged skin contact and always observe good housekeeping and personal hygiene measures such as washing hands after handling the material and before eating, drinking, and/or smoking.

Complete MSDS information available on the Novak web site.

Wipe any dirt and debris build-up from the

(or a mini ﬂat blade screwdriver)

(ﬂatten seals if they got bent during removal)

(949) 916-6044 • Monday-Thursday

to gently pry

.