NorthStar SLIM Tach RL67 Instruction Manual
Instruction Manual
SLIM Tach® RL67
Magnetoresistive Encoder
Designed for use in
0.625” to 1.125” Thru-Shaft Diameter Applications
1 |
*791-1009-00 Rev.I |
+1.800.873.8731 |
© DYNAPAR |
.
2 |
© DYNAPAR |
NorthStar SLIM Tach® RL67 Instruction Manual
Table of Contents
Chapter/Paragraph/Illustration |
Page |
||
1 |
Introduction ....................................................................................................................................... |
4 |
|
|
1.0 |
Safety Summary.......................................................................................................................................... |
4 |
|
1.1 |
General........................................................................................................................................................ |
5 |
|
1.2 |
Description.................................................................................................................................................. |
5 |
|
|
Figure 1: RIM Tach® RL67 Exploded View .............................................................................................. |
5 |
|
|
Figure 2: RIM Tach® RL67 Dimensional Drawing .................................................................................... |
6 |
|
1.3 |
Specifications.............................................................................................................................................. |
5 |
2 |
Installation ......................................................................................................................................... |
6 |
|
|
2.0 |
Inspection and Unpacking........................................................................................................................... |
6 |
|
2.1 |
Motor Facing and Shaft .............................................................................................................................. |
7 |
|
|
Figure 3: Typical 6.75 Inch Diameter Motor Facing or 4.5 Inch Type 56C -Face.......................................... |
7 |
|
2.2 |
Tachometer Frame Installation ................................................................................................................... |
8 |
|
|
Figure 4: Typical Motor Mounting ........................................................................................................... |
8 |
|
|
Figure 5: Pulse Wheel............................................................................................................................. |
8 |
|
2.3 |
Electrical Installation .................................................................................................................................. |
9 |
|
2.4 |
Quick Release Connector Hood Wiring...................................................................................................... |
9 |
|
|
Figure 6: Sealed Industrial Catching Connector ........................................................................................ |
10 |
|
2.5 |
Returning Equipment to Dynapar ............................................................................................................... |
10 |
Methods and apparatus disclosed and described herein have been developed solely on company funds of Dynapar No government or other contractual support or relationship whatsoever has existed which in any way affects or mitigates proprietary rights of Dynaparinthese developments. Methods and apparatus disclosed herein may be subject to U.S. Patents existing or applied for. Dynapar reserves the right to add, improve, modify, or withdraw functions, design modifications, or products at any time without notice. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with furnishing, performance, or use of this material.
3 |
© DYNAPAR |
Loading...