Northern Industrial Tools M35982E, 45930, 45929 User Manual

Air Compressor
Pump
ITEM # 45929 & 45930

Proven Performance

OWNER’S MANUAL

M35982E

Quick Facts

Pump Oil Check pump oil level before starting.

Use Non-detergent pump oil (item # 35605).

Maximum

RPM

Minimum

Horsepower

Displacement 45929: 11.3 CFM

CFM @ 90 psi 45929: 8.2

Rotation Pump crankshaft MUST rotate in direction of arrow cast into flywheel.

Drive Belt Flywheel requires “A” style belt

Air Flow Belt guard MUST allow maximum air flow past pump.

45929: 1570 RPM (700 RPM Minimum)
45930: 1450 RPM (700 RPM Minimum)
45929: 5.0 hp gas engine, 3.0 hp electric motor
45930: 5.5 hp gas engine, 4.0 hp electric motor

45930: 16.9 CFM
45930: 13.2

Any Questions, Comments, or Problems?

Call Customer Service at 1-800-270-0810

Hours: Monday - Friday 7:00 AM to 5:00 PM

Saturday 7:30 to 11:30 AM CST

THANK YOU

Thank you for purchasing a NorthStar compressor pump. Your pump is designed for
long life, dependability, and the top performance you demand. Please take time now to
read through this manual so you can better understand the pump’s safety precautions.
Everyone who uses this pump must read and understand this manual. Enjoy the
exceptional performance of your NorthStar pump.

IMPORTANT

Make certain the operator:

- Reads and understands the manuals pertaining to this tank.

- Is instructed in safe and proper operation of this air compressor tank.

NOTICE

K-BAR Industries Incorporated reserves the right to make improvements in design
and/or changes in specifications at any time without incurring any obligation to install them
on units previously sold.

WARNINGS

ALWAYS bleed pressure from tank before servicing.

ALWAYS use air handling parts that are rated above the maximum allowable working

pressure of the tank.

ALWAYS drain tank daily or after each use. Rusted tanks can cause explosion and

cause severe injury or death.

ALWAYS read your owners manual before operating.

ALWAYS use at least one ASME safety relief valve rated at 200 psi or below.

ALWAYS use an ASME certified air receiver tank.

ALWAYS use Teflon tape on all treads to reduce leaks.

NEVER exceed the nameplate rating of the tank (200 psi working pressure). Exceeding

this rating can cause explosion and cause severe injury or death.

NEVER operate machine without a belt guard in place.

NEVER bypass, modify, or remove safety/relief valves.

NEVER direct air stream at people or animals

NEVER modify or repair tank, obtain an ASME replacement from a service center or

customer service at 1-800-270-0810.

NEVER breathe receiver air. Can contain Carbon Monoxide or other contaminants.

Will cause serious injury or death.

NorthStar air compressor tanks are not designed for breathing air.