All rights reserved. Printed in the USA. October 2001.
The informatio n in this docum ent is subject to change w ithout notice. The stat ements, configura tions, technical
data, and recommendatio ns in this document are believed to be accurate and reliable, but are presented wit hout
express or implied warranty. Users must take full responsibility for their applicati ons of any products specified in
this doc ument. The information in this document is proprietary to Norte l Networks, Inc.
The software described in this document is furnished under a license agreement and may only be us ed in
accordance with the terms of that license. A summary of the Software License is included in this document.
Trademarks
Nortel Networks, the Nortel Networks logo, the Globemark, Unified Networks, Marathon, Optivity, Passport, and
Preside are trademarks of Nortel Networks.
Adobe an d A crobat Reader are tra dem arks of Adobe Systems Incorporated.
Pentium is a registered trademark of Intel Corporation.
Microsoft, MS-DOS, Windows, and Windows N T are registered trademarks of Microsoft Corporation.
Netscape and Netscape Navigator are registered trademarks of Net scape Communicati ons C orporation
All other trademarks and registered trade marks are the property of their respective owners.
Restricted Rights Legend
Use, duplication, or dis closure by the Unit ed States Government is subject to restricti ons as set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data an d Com puter Software clause at DFARS 252.227-7013.
Notwithstanding any other license agreement that may pertain to, or accompany the delivery of, this computer
software, the rights of the United States Gove rnment regarding its use, reproduction, and disclosure are as set f orth
in the Commercial Computer Softwa re-Restricted Rights clause at FAR 52.227-19.
Statement of Conditions
In the interest of improving internal design, operational functi on, and/or reliability, Nortel Networks, Inc. reserves
the right to make ch anges to the products described in this document without notice.
Nortel Networ ks , Inc. does no t ass ume an y liabi li ty tha t may oc cur due to the use or ap pli ca tion of the product (s ) or
circui t layout (s) described herein.
SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED “AS IS” AND WITHOUT ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
In addition, the program and information contained herein are licensed on ly pursuant to a license agreement that
contai ns restrictions on use and discl osure (that may incorporate by reference certa in limitations and no tices
imposed by third parties).
206906-D Rev 00 4.2
EC Declaration of Conformity
This product conforms (or these products conform) to the pr ovisions of Council Dir ective 89/336/EEC and 73/23/
EEC. The Declaration of Conformity is available at Nortel Networks, 4100 Guardian St reet Simi Valley, CA 93065
attention: Regulatory Department.
LIMITATIONS OF REMEDIES
Nortel’s entir e liability and Customer’s exclusive remedies are as follows: N ortel shall (i) use commercially
reasonable eff orts to correct any failure of the software program, of which it is g iven written notice b y Customer
during the Warranty Period, to perform substantially in accordance with the documentation, provided such failure
can be recreated by Nortel in an unmodified version of the software program, or if Nortel is unable to correct such
failu re the software progr am and documentation may be returned and the license fee paid will be refunded, or (ii)
replace any diskette not meeting Nortel’s “Limited Warranty” or, if Nortel is unable to deliver a replacement
diskette which is free from defects in materials or workmansh ip, the software program and documentat ion may be
returned and the license fee paid will be refunded.
IN NO EVENT WILL NORTEL OR ITS SUPPLIERS BE LIABLE TO CUSTOMER FOR ANY LOST
PROFILES, LOST SAVINGS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT
OF THE USE OR INABILITY TO USE THE PROGRAM EVEN IF NORTEL HAS BEEN ADVISED OF THE
POSSIBLITY OF SUCH DAMAGES. THE LIABILITY OF NORTEL, IF ANY, FOR DAMAGES RELATING
TO ANY NORTEL SOFTWARE PRODUCT SHALL BE LIMITED TO THE ACTUAL AMOUNTS PAID BY
CUSTOMER FOR SUCH SOFTWARE PRODUCT.
SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR THE LIMITATION
OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
EXCLUSIONS OR LIMIT ATION MAY NOT APPLY.
3
Using Passport 4400 Install Tool Version 4.2
4
PASSPORT SOFTWARE LICENSE
THIS LICENSE AGREEMENT (“License”) BETWEEN CUSTOMER AND NORTEL NETWORKS
GOVERNS CUSTOMER’S USE OF PASSPORT SOFTWARE DELIVERED BY NORTEL NETWORKS
FOR USE WITH PASSPORT HARDWARE AS ORDERED BY CUSTOMER UNDER THE AGREEMENT
FOR PURCHASE AND LICENSE OF NOR T EL NETWORKS PRODUCTS AND SERVICES (“Agreement ”)
TO WHICH THIS ADDENDUM IS ATTACHED AND FORMS A PART.
Subject to the terms hereinafter set forth, Nortel Networks grants to Customer and/or its repr esentatives, wit h a
“need to know,” a personal, non- exclusive licens e (1) to use th e Software, proprie tary to Nortel Networks or its
suppli ers and (2) to use the as sociated documentation. Cu stomer is granted no ti tle or ownership ri ghts, in or to the
Software, in whole or i n part, and Customer acknowledges that tit le to and all copyr ights, patents, trade secrets and/
or any other intellectual property rights to and in al l such Software and associated documentation are and shall
remain t he p rop er ty of N orte l Ne two rks and /or Nor tel Ne tw orks ’ su ppl iers . The r igh t to us e So ft war e is rest ri cted t o
the Nort el Networ ks Pass port Hardw are wit h wh ich th e Sof twa re is deli ve red and may be re st rict ed b y a meas ure of
usage of applications bas ed upon number of lines, number of ports, number of terminal numbers assigned, number
of users, or some similar measure. Expans ion beyond the specified usage level may require payment of an
incremental charge or another license f ee.
Nortel Networks considers the Software to contain “trade secrets” of Nortel Networks and/or its suppliers. Such
“trade secrets” include, without limit ation thereto, the specific design, structure and logic of individual Software
program s, their intera ctions with other portions of Software, both internal and externa l, and the programming
techniques employed therein. In order to maintain the “trade secret” st atus of the information contained within the
Software, the Software is being deli vered to Customer in object code form only.
Nortel Networks or any of its suppliers holding any intellectual prop erty rights in any Software, and/or any t hird
party owning any intellectual property rights in software from which the Software was deri ved, are intended third
party beneficiaries of this License. All grants of rights to use intellectual property intended to be accomplished by
this License are explicitly stated. No other grants of such rights shall b e inferred or shall arise by implication.
Customer warrant s to Nortel Networks that Customer is not purc hasing the rights gr anted by this License in
anticipation of reselling those rights.
Customer shall :
•Hold the So ftwa re in con fi den ce fo r the benef i t of Nort el Netwo rks and/or Norte l Netw ork s’ su ppl ie rs using no
less a degree of care than it uses to protect its own mo st confidential and valuable inform ation; and
•Keep a cu rrent record of the location of each copy of Software made by it; and
•Instal l and use each copy of Software on ly on a single CPU at a time (for this purpose, single CPU shall include
systems with redundant processing units); and
•Affix to each copy of Softwar e m ade by it, in the same form and location, a repr oduction of the copyright
notice s, trade mark s, and al l other pro pri et ary le gen ds an d/ or logos of Nor te l Net work s and /o r Nort el Net work s’
supp lie rs , ap p ea ring on th e or ig in a l copy of su ch So ft w ar e d el ivered to Cu st omer; and retain th e sa m e wit h ou t
alteration on all original copies; and
•Issue instructions to each of its authorized employees, agents, and/or representati v es to whom Softw are is
disclo se d, advi si ng them of the c onf ide ntia l na ture of suc h Sof tware an d to prov ide them with a summar y of the
requirements of this License; and
•Return the Software and all copies through an Authorized Distributor to No rtel Networks at such time as
Customer chooses to permanently cease using it.
•Customer shall not:
•Use Software (i) for any purpose other than Customer’ s own internal business purposes and (ii) other than as
provided by this License; or
•Allow anyone other than Customer’s employees, agents and/or representatives with a “need to know” to have
physical access to Software; or
206906-D Rev 00 4.2
•Make a ny copies of Softwa re except such limited number of object code copies in ma chine readable form only,
as may be reasonably necessar y for execution or arch ival purposes only; or
•Make any modifications, enhancements, adaptations, or translations to or of Software, except as ma y result
from those Customer int eractions with the Software associated with no rm al use and explained in t he associated
documentation; or
•Attempt to reverse engineer, disassemble, reverse translate, decompile, or in any other manner decode
Software, in order to derive the source code form or for any other reason; or
•Make full or partial copies of any documentation or other similar print ed or machine-readable matter provided
with Software unless the same has been supplied in a form by Nortel Networks intended for periodic
reproduction of partia l copies; or
•Export or re-export Software and/or associate d documentation from the fifty states of the United States and the
District of Columbia.
•Notwithstanding the above restrictions, if Customer has licensed the Software under a “site license” option as
set for th in the applicable Service Order, Customer is authorized to make a limited number of copies of the
Software and documentation to support additional us ers as specified in Customer’s purchase agreement.
Customer may assign collectiv ely its rights under this License to any subsequent owner of the associated hardware,
but not otherwise, subject to the paym ent of the then current license fee for new users, if any. No such assignment
shall be valid until Customer (1) has delegated all of its obligat ions under this License to the assignee; and (2) has
obtain ed fr om th e ass ig nee an uncondi t io nal wr itt en as sump ti on of a ll suc h obl ig ation s; and ( 3) ha s provi ded Nort el
Networks a copy of such assignment, del egation and assumption; and (4) has tr ansferred physical possession of all
Software and all associated documentation to the assig nee and dest royed all archival copies. Except as provided,
neither this License nor any rights acquired by Cus tomer through this License are assignable. Any attempted
assignment of rights and/or transfer of S oftware not specifically allowed shall be void and conclusively presumed a
material breach of this License.
If Nortel Networks (i) claims a materia l breach of this License, and (ii) provides written notice of such claimed
material breach to Customer and (iii) observes that such claimed m a terial breach remains uncorrected and/or
unmitigated more than th irty (30) days following Cust om er’s receipt of writte n notice specifying in reasonable
detail th e na ture of th e clai med m ater ia l brea ch, th en Cust omer ackn owl edge s that th is Licens e may be im med iatel y
terminated by Nortel Networks and Customer furth er acknowledges that any such termination shall be without
prejudice to any other rights and reme dies that Nortel Networks may have at la w or in equity.
THE EXPRESS LIMITED WARRANTIES FOR THE SOFTWARE ARE SOLELY THOSE LIMITED
WARRANTIES GRANTED TO CUSTOMER BY NORTEL NETWORKS IN THE MAIN BODY OF THE
AGREEMENT TO WHICH THIS LICENSE IS ATTACHED. THIS LICENSE DOES NOT CONFER ANY
WARRANTY TO CUSTOMER FROM OR BY NORTEL NETWORKS.
IN NO EVENT WILL NORTEL NETWORKS AND/OR NORTEL NETWORKS’ SUPPLIERS AND THEIR
DIRECTORS, OFFICERS, EMP LOYEES OR AGENTS BE LIABLE TO OR THROUGH CUSTOMER FOR
INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL, PUNITIVE, OR EXEMPLARY DAMAGES OF
ANY KIND, INCLUDING LOST PROFITS, LOSS OF BUSINESS OR BUSINESS INFORMATION,
BUSINESS INTERRUPTION, OR OTHER ECONOMIC DAMAGE, AND FURTHER INCLUDING INJURY
TO PROPERTY , AS A RESULT OF USE OR INABILITY TO USE THE SOFTWARE OR BREACH OF ANY
WARRANTY OR OTHER TERM OF THIS LICENSE, REGARDLESS OF WHETHER NORTEL NETWORKS
AND/OR NOR TEL NETWORKS’ SUPPLIERS WERE ADVISED, HAD OTHER REASON TO KNOW, OR IN
FACT KNEW OF THE POSSIBILITY THEREOF.
THE RIGHTS AND OBLIGATIONS ARISING UNDER THIS LICENSE SHALL BE CONSTRUED IN
ACCORDANCE WITH THE LAWS OF THE STATE OF CALIFORNIA EXCEPT FOR ITS RULES
CONCERNING THE CONFLICT OF LAWS.
This chapter desc ribe s the conte nt and org ani zation of this g uide and ide ntifies th e
audience to which it is targeted.
Topics in this chapter:
•Purpose of This Manual
•Who Should Use This Manual
•How This Manual Is Organized
•Related Publications
Purpose of This Manual
13
This manual identifies the requirements for using the Passport 4400 Install To ol
Release 4.2 software, provides detailed instructions for inst alling it and
configurin g a workstat ion to support it, and provides an introduc tion to the basic
Install Tool operations.
Using Passport 4400 Install Tool Version 4.2
14
Who Should Use This Manual
You should use this manual if you are performing any of the following tasks.
TaskWho Typically Does ItRefer to
Installing the software onto a
workstation
Cabling a workstat ion to a
Passport 4400
Configuring a work station for
Install To o l ac tivit i es
Providing conf iguration data to the
Install Tool user
Performing a basic Passport 4400
configurati on (using Install Tool)
How This Manual Is Organized
This manual is organized as follows:
Chapter Description
System AdministratorChapters 2 and 4 and
Appendix D
System Adminis tr atorChapters 3 and 9
System Adminis tr atorChapter 5
Network Architect or
Network Engineer
Network Engineer or
Operator
Appendixes B and C
and the online help
Planning Forms
Chapters 1, 6
through 10, and
Appendix A
1Presents an ov erview of the devi ce manage ment tool s that ar e avail able fo r the
2Identifies the system requirements for using Install Tool , and describes its
3Provides procedures for connecting the workstat ion to a Passport 4400.
4Provides procedures for installing InstallT ool on a workstation.
5Provides guidelines for confi guring a Windows workstation to support
6Provides instructions for starting I nstall Tool and describe s its basic operati onal
7Describes and provides instructions for using the Install Tool wizards.
8Provides in structions for configurin g, testing, and displaying the status of
206906-D Rev 00 4.2
Passport 4400.
overall capabilities.
Install Tool operations.
features.
selected ports.
Chapter Description (cont inued)
9Provides instructions for est ablishing an Ethernet connection wit h a remote
Passport 4400.
10Provides instructions for establishing a local or remote Telnet connection,
thereby allowi ng access to the Passport 4400 CLI so that you can perform
additional configuration tasks.
AIdentifi es Install Tool error conditions and m essages and provides procedures
for working aroun d, correcting, or recovering from them.
BIdentifi es the parameters that you can configure through Install Too l.
CPresents an overview of Passport 4400 IP addressing requirements.
DProvides instructions for r emoving Install T ool from your workstation.
Related Publications
15
For more information about the Passport 4400, refer to the following documents:
•Passport 4400 Setup Poster (Nortel Networks part number 209444-A)
•Passport 4400 Hardware Installation Manual (For Passport 4430/50/55)
(Nortel Networks part number 800-1951-40)
•Refere nce for the Passport 4460 Hardw are (Nort el Networks part number
205677)
•Getting Started with the Passport 4400, Release 4.1 (Nortel Networks part
number 209664)
•Refere nce for Passport 4400 Cables (Nortel Networks part num ber 205678)
•Configuring and Operating Passport 4400 (Nortel Networks part number
206916) online doc umentation
•Passport 4400 Refere nce for CLI (Nortel Networks part number 209666)
•Using the Passport 4400 Mass Deployment and Reporting Tool (Nortel
Networks part number 209665)
•Refere nce for Passport 4400 and 6400 Interworking (Nortel Networks part
number 209372)
•Getting Start ed with Passport 4400 and 6400 Interworking (Nortel Networks
part number 209371)
•Passport 4400 Release Notes for Passport 4430/50/55 Release 4.0 (Nortel
Networks part number 800-1953-40)
Using Passport 4400 Install Tool Version 4.2
16
•Passport 4400 Release Notes f or Pas sport 4400 Release 4.1 ( Nortel Net works
part number 205679)
206906-D Rev 00 4.2
Chapter 1
Passport 4400 Dev ice Man agem ent
This chapter provides a brief overvie w of the device management tools that are
available for the Passport 4400.
Topics in this chapter:
•Overview
•Passport 4400 Device Management T ools
•Which Tool To Use?
Overview
17
Passport 4400s are managed through Simple Network Management Protocol
(SNMP), an application- level pr ot ocol that o perate s over TCP/IP. Th erefore, all of
the Passport 4400 device management tools (refer to “Passport 4400 Device
Management Tools” on page 18) accept your commands and instructions, then
translate them into SNMP commands.
Using Passport 4400 Install Tool Version 4.2
18
Passport 4400 Device Management T oo ls
The Passport 4400 provides the following device management tools:
ToolWhen To Use ItFor More I nformation
Install ToolUse Install Tool to set up a factory-new
or factory-defaulted Passport 4400,
such that network connectivi ty and
basic services are enabled. I n addition,
you can use Install Tool to perform
real-ti me monitoring of Passport 4400s
units in your net work.
Passport 4400
Configurator
Use the Configurator to perform any
Passport 4400 confi guration task.
Note 1: The Passport 4400
Configurator is an embedded web
interface. It is a built-in component of
Passport 4400 units ru nning software
release 4.0 and higher.
Note 2: To access the Passport 4400
Configurato r fr om wit hin Install Tool,
select
Web C o nfigu rator
System menu.
Note 3: Like InstallT ool, the
Passport 4400 Config urator can acce ss
the Passport4400 through PPP IP
connecti vity.
from the
Refer to this manual and
the Instal l T ool on line help
for com pl e te
documentation.
Refer to the
Configuring
and Operating
Passport 4400 Software
(Nortel Net works part
number 206916) onl ine
documentat ion.
Command Line
Interface (CLI )
Passport 4400
Mass Deployment
and Reporting Tool
206906-D Rev 00 4.2
Use the CLI to perfor m any
configuration task, esp ecially low-level
or specialized tasks.
Use the Mass Deployment and
Reporting Tool to generate
configurati on reports and to replicate
the configuration of one unit to mul tiple
units.
Refer to the
Passport 4400 Reference
for CLI
part number 209666).
Refer to the
(Norte l Networks
Using the
Passport 4400 Mass
Deployment and
Reporting Tool
Networks part number
209665)
(Nortel
Which Tool To Use?
Configuring a Passport 4400 typically involves the use of Install Tool and one or
more of the other device management tools.
The following paragraphs provide recommendations for using one or another of
the Passport 4400 device management tools for pe rforming some basic de vice
management tasks.
Initial Device Setup and Configuration
The task:Set up a factory- new or factory-defaulted Passport 4400 to
Recommended tool:Install Tool
19
enable basic network connectivity and basic service
functionality.
Alternative:Configurat or or CLI
Description:No specialized skills or knowledge are required to use
Install Tool.
Note: You can also use the Mass Deployment and Reporting
Tool to replicate th e configuration of one unit to a group of
factory-new or factory-defaulted units.
Detailed Configuration
The task:Configure all ports and servic es on the uni t.
Recommended tool:Configurat or
Alternative:CLI
Description:Once you have used Install Tool to configure all Passpor t 4400
services to a basic level, you can then use the Configurator to
configure these services to a much more detailed level. In
addition, you may need to use the CLI for some low-level or
rarely-used configuration settings.
Using Passport 4400 Install Tool Version 4.2
20
Update a Device Configuration
The task:Update a device configuration to support the addi tion,
modification, or removal of har dware and services.
Recommended Tool:Install Tool or Configurator
Alternatives:CLI
Description:In simp le cases, you can use an Install Tool wizard to configure
a new service or a new hardware module.
Diagnose Faults
The task:Diagnose Device Faults.
Recommended tool:CLI or Instal l Tool
Alternative:Configurat or
Description:Both Install T ool and Configurator provide some leve l of
Monitor Device Status
The task:Monitor the status of a Passport 4400 (in rea l- ti m e).
Recommended tool:Install Tool
Alternative:Configurat or
Description:Install Tool polls t he unit with which it has a connection every
diagnostic support for the Passpo rt 4400. The CLI provides the
most comprehensive level of support.
ten seconds and updates the backpanel di splay if there is a
change in the status of any ports. In addition, You can get a
detailed di splay of the status of any port on the unit. Install Tool
updates the display with each polling cycle.
206906-D Rev 00 4.2
Generate Configuration R eports
The task:Produce a report showing the configuration settings of a
Passport 4400.
Recommended tool:Mass Deployment and Reporting Tool
Alternative:None
Description:Mass Deployment and Reporting Tool generates reports that
detail the configuratio n of the unit to which you are connected.
Replicate a Configuration
The task:Replicate t he configur ation of one Passpor t 4400 to any number
of other Passport 4400s.
Recommended tool:Mass Deployment and Reporting Tool
21
Alternative:None
Description:Mass Deployment and Reporting Tool allows you to ext ract the
configuration of one Passport 4400 and replicate it to any
number of other Passport 4400s that require a similar
configuration. The replication process i ncludes a
parameter -r eplacement mechanism in which you designat e
values for pa rameter s (such as IP addresses) that ar e uniq ue to
each target system.
Using Passport 4400 Install Tool Version 4.2
22
206906-D Rev 00 4.2
Chapter 2
Product Overview
This chapte r provide s a brie f ove rview of Pass port 4400 Install Too l and desc ribe s
the requirements for run ning it.
Topics in this chapter:
•About Install Tool
•Workstation Requirements
•Security Considerations
About Install Tool
23
Install Tool Software Versions
This manual pertains only to the Passport 4400 Install Tool Release 4.x
software. For infor mation about Install Tool Version 1.0, refer to Install Tool Version 1.0 Setup Guide, document number 800-1983-30. For information abou t
Install Tool Version 2.0x, refer to Install Tool V ersion 2.0x Startup Guide,
document number 800-1983-31.
What Is Install Tool?
Install Tool is a standalone program for configuring the basic services of a
Passport 4400 unit sufficient to make it accessibl e wi thin a Passport network. It is
designed to simplify the initial setup of a new unit that you are installing in a
network.
Using Passport 4400 Install Tool Version 4.2
24
Install Tool provides a graphical representation of a Passport 4400 backpanel to
show the current configur ation of the unit and to allow basic configuration of the
primary services available on the unit.
Passpo rt 4400 Software Support Levels
Passport 4400 Install Tool Release 4.2 supports the following Passport 4400
models, running Release 3.x and Release 4.x system software:
•Passport 4430
•Passport 4450 and Passport 4455
•Passport 4460
Availability
Install Tool is included on the Passport 4400 software distribution CD. In
addition, distributors can download the Install Tool sof tware, at no cost, from the
Partner B u s ine ss Ce nter web site (http://www57.nortelnetworks.com/global/products/passport/software.html).
Workstation Requirements
The workstation on which you install the Install Tool program must meet the
following hardware and software requirements:
•A Pentium 90 MHz PC (166 MHz or higher is recommended)
•100 MB free disk space (minimum)
•W indows 95, 98, or Me with 24MB DRAM (minimum), or Windows NT 4.0
or 2000 Workstation with 48MB DRAM (minimum)
•Netscape Communicator 4.7 (or higher) or Internet Explorer 4.x (or higher)
•SVGA video with 800 x 600 dpi resolution support ing 256 colors or better
(1024 x 768 dpi resolution supporting 65535 colors recommended)
•An Ethernet network card
•An available serial port
•A mouse or other pointing device
206906-D Rev 00 4.2
Refer to “What the Installation Procedure Does” on page 36 for a description of
additional sof twa re that is required to run Install Tool.
Security Considerations
There are two security-related issues to consider when planning your
Passport 4400 device management operations.
Community Strings
The Passport 4400 uses SNMP Version 1 for all of its dev ice management
operations (confi guring, monitoring, resetting, and so forth). SNMP Version 1
uses community strings to control access to devices in a network. Since these are
simple text strings, they are relatively insecure.
25
You can use the Passport 4400 Configurator or the Passport 4400 CLI to change
your community strings. Install Tool allows you to specify a node’s community
string (password) when you establish a connection with the node, but it does not
include a provision to change the community string.
Dial- Up Connections
The Passport 4400 provides a PPP stack, thereby enabling access to Passport 4400
nodes through dial-up connections. This PPP implementation doe s not provide
authentication controls. Therefor e, if you connect a modem to a Passport 44 00 to
support a dial- up connec tion , tha t node bec omes accessi ble to a ny rem ote hos t t hat
knows the phone number of the modem and the community string of that node.
Furthermore, any host that successfully connects to a dial-up port can potentially
gain access to all devices that are visible to the Passport 4400.
It is recommended that you take appropriate measures to protect your network
from unauthorize d access. For example:
•If you access a Passport 4400 through a dial-up connecti on, disconnect the
modem from the Passport 4400 at the completion of your session.
•Consider using a dial-back modem rather than a dial-up modem.
Using Passport 4400 Install Tool Version 4.2
26
•Treat your community strings as passwords and manage them as you would
any other password system.
For more information about dial-up connections, refer to “Connecting a
Workstation” on page 27 and “Configuring a Dia l-Up Networking Connection”
on page 46.
206906-D Rev 00 4.2
Chapter 3
Connecti ng a Work station
This chapte r describe s the requ irements a nd proce dures for est ablishi ng a direct or
modem connection between a Passport 4400 and the workstation upon which you
will install Inst all Tool.
Topics in this chapter:
•Readying a New Passport 4400
•Ethernet Connection
•Management Port Direct Connection
•Management Port Modem Connection
•Configuring the Modems
27
Readying a New Passport 4400
A factory-new Passport 44 00 requires some prepar ation before you can configure
it using Install Tool. The following manuals provide specif ic instructions for
Passport 4400 physical installation, preparation, and cable connections:
The Passport 4400 is shipped from the factory with a pre-configur ed IP address
(192.168.200.200). You can connect your workstation to the unit using the
Ethernet port, as long as the worksta tion is in the same IP segment as the
Passport 4400.
Example
This illustration shows an Ethernet connection on a Passport 4460.
Passport 4460
Network
Interface Card
Other Connection Options
If your workstation’s Ethernet port is not configured for the same IP segment as
that of the Passport 4400, you must connect your workstation to the unit ove r the
management port, as describe d in “Management Por t Direct Connection” on
page 29 and “Management Port M odem Connection” on page 30.
EXPANSION
STAT
RST
2
10/100
P
O
R
T
2
P2 STATUS
P1 STATUS
PORT 1
P3 STATUS
SYSTEM
P
STATUS
O
R
T
3
LAN Port
206906-D Rev 00 4.2
Management Port Direct Connection
If the PC and Passport 4400 are in physical proximity to one another, you can
directly connect them using the management cable supplied with the
Passport 4400.
Example
This illustration shows a direct management port connection on a Passport 4460.
PC
29
Management Port Connector
Serial Port
About the Management Cables
There are two types of management cables used on Passport 4400 units:
•Use management cable number NTAU17AA for Passport 4430,
Passport 4450, and Passport 4455 units. In this case, you connect the DB-25
end of the cable to the PC and the RJ-45 end of the cable to the Passport 4400
management port. ( You may need a 9 pin-to- 25 pin RS-232 ser ial port a dapte r
or a female-t o-female 25-pin ad ap ter t o connect the cable to the PC.)
•Use management cable 207490-A for Passport 4460 units. This is a standard
DB9 femal e to DB9 fem al e seri al cabl e.
115/230V
MGNT
PORT
RESERVED
SERVICE
PORT
Using Passport 4400 Install Tool Version 4.2
30
Management Port Modem Connection
If the PC and the Passport 4400 are not in physical proximity to one another, you
can connect them through a modem.
Note: For more detailed infor mation on connecting a modem to the
Passport 4400, see the hardware reference manuals.
Passport 4430/50/55 Modem Connections
With Passport 4430, Passport 4450, and Passpor t 4455 units, you use a null
modem cable to connect the modem to the management port.
Example
This illustration shows a modem connection on a Passport 4450.
PC
Passport 4400
tSerial Por
Modem
Management
Port
Serial Cable
Modem
Null Modem
Cabling the Modem to the Passport 4430/50/55
You need to make the following cable connection between a Passport 4430/50/55
and the modem to which it is connected:
NTAU17AA
206906-D Rev 00 4.2
Loading...
+ 114 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.