Nortel 1200 User Manual
IP Phone 1200 Series
LED Expansion Module: 18-Key Paper Label
Quick Reference Guide
This document provides information about the LED Expansion Module with 18-key
paper label for the IP Phone 1200 Series.
The LED Expansion Module is a hardware accessory that connects to the IP Phone
and provides 18 additional line keys and feature keys. You can place the IP Phone and
Expansion Module on your desktop or you can wall-mount the IP Phone and LED
Expansion Module.
The IP Phone 1200 Series supports up to two LED Expansion Modules. The LED
Expansion Modules are supported on the following phones:
• IP Phone 1220
• IP Phone 1230
The following figure shows the LED Expansion Module. The paper insert allows you to
create your own label for each key. You can also use the Desktop Assistant Pro
application with this expansion module.
Figure 1 LED Expansion Module: 18-Key Paper Label
User-defined feature
key LEDs
Labels
User-defined
feature keys
Business Communications Manager
2
About your user-defined feature keys
Your system administrator assigns the user-defined feature keys as line, intercom, or memory keys. For
more information about how keys are assigned, see your system administrator.
Line and intercom keys
Your system administrator assigns line and intercom keys. Line keys are assigned to an external line,
and intercom keys are assigned to internal lines.
Memory keys
Memory keys are keys that are not assigned as line or intercom keys. Memory keys store internal and
external phone numbers or features to give you one-touch dialing or feature activation. You can program
a memory key with a new phone number or feature.
Programming external autodial
1 Press the Feature key.
2Enter *1.
3 Press a memory key.
4 Dial the external number.
5 Press OK to store the number.
Programming internal autodial
1 Press the Feature key.
2Enter *2.
3 Press a memory key.
4 Dial the extension number.
5 Press OK to store the extension number.
Programming features
1 Press the Feature key.
2Enter *3.
3 Press a memory key.
4 Press the Feature key.
5 Enter the feature code.
6 Press OK to store the feature code.
Erasing memory keys
1 Press the Feature key.
2Enter *1.
3 Press a memory key.
4 Press OK to erase the phone number or feature code programmed on the key.
NN40050-116 01.01
Standard August 2007
Copyright © 2007 Nortel Networks
All rights reserved
Loading...