Norgren V3 User Manual

The VersaPump 3 is designed with the flexibility and versatility to meet a
variety of system configurations. It can be used as a stand alone controller,
or integrated into system configurations. The module is capable of simple
closed loop control of an external quantity or process without the need of an
external controller for direction.

Mechanically, the syringe pump is driven via stepper motor and precision ball
screw. It has a 30mm stroke and is available in two resolutions. The pump
can be coupled with a variety of valves and syringes to meet specific needs.
Pump communications are compatible with other Kloehn devices.

Physical

Height

5"

Width

2.55"

Depth

4.6" (face plate to back plate)

Weight

2.5 lbs

Power

Operation

24V nominal (20V to 30V)
(with a maximum power ripple
of 720mv peak to peak).

Power Consumption

25 watts; 6 watts idle.

V3 Syringe Drive Pump

Environmental

Operating Temperature

32°F to 131°F (0°C to 55°C)

Operating Humidity

5 to 95% RH, non-condensing at
131°F (55°C)

Storage Temperature

13°F to 185°F (–25° to 85°C)

WEEE & RoHS compliant

Mechanical

Operation

Any orientation

Mounting Holes

Top and bottom

Two Resolutions Available

(6,000 and 12,000 increments)

Speed

(Max. – 8000 steps/sec.)
(Default – 2500 steps/sec.)

Syringe Size

50ul to 5ml

Valve Type

2 way to 6 way

1/10 Stroke Dispenses Full Stroke Dispenses
Precision: 0.36% CV, 0.5% max. 0.01% CV, 0.018% max.
Accuracy: 0.4 4% CV, 0.5% max. ——

Interface

RS-485 or RS-232 communications
Data terminal or OEM protocol
1200 to 38.4K baud, 8 data bits,
1 stop bit, no parity, half duplex
Three inputs, three outputs
Digital voltmeter capability
Switched and wired device address
I / O expansion

Syringe Pump:

VERSAPUMP 3 AVAILABLE SCENARIO CHART

RESOLUTION FEATURE

12K 6K

X X X 23257

X X X 23255

X X X 23256

X X X 23254

X X X 23253

X X X 23251

X X X 23252

X X X 23250

Decal is optional, if required add to order P/N 24073.

VALVE FEATURE

NONE ROTARY

DRIVER & CONTROL FE ATURE

NONE DRIVER &

CONTROL BOARD

PUMP

PT#

5/13

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

© Norgren Kloehn, Inc. 2012

PDS-0004 REV. 6

V3 Syringe Drive Pump

Ancillary items:

Communication cable RS485, 6” long; pump to pump (2 units) P/N 17736
Pump to pump stacking kit P/N 23453
Cooling Fan P/N 24287
Mounting Kit P/N 24480
Starter Kit (includes all items listed below) P/N 23427

24VDC Power supply P/N 23429
Adapter (card edge to AMP connectors) P/N 23428
Software; operator’s manual; and application notes. P/N 23422
Communications cable P/N 17734

Software support:

KloehnControl (configuration and debug program)
KSerial (command-line communication utility)
KCom (machine language helper program)
KProbe (communication trouble shooting utility)

Valves - Face:

Configuration P/N - Distribution Non - Distribution Orifice Size

1-WAY (syringe mtg. block) 23272 — .059 (straight through)
3-WAY 23324 23562 .059
4-WAY 23325 23563 .059
5-WAY 23326 — 1 mm
6-WAY 23327 — 1 mm

Valve construction:

Valve wetted sur faces have a PPS (polyphenylene sulfide) body and PEEK (XP113) rotor.
Port connection is 1/4-28 UNF.
All valve por ts are accessible when using syringes listed and Kloehn spring-loaded fittings
(recommended) or standard fittings (Upchurch #P200 fittings or equal).
Valve weep hole port connection is #6-40 UNF-2A. Fittings for this port are available in t wo materials;
PEEK (PT # 24528); and stainless steel 303 (PT # 24529). For use with 1/16 OD tubing.

Valves - Plug:

Configuration P/N - Distribution Non - Distribution Orifice Size

2-WAY 25390 — 0.031
2-WAY 25391 — 0.059
2-WAY 25392 — 0.076
3-WAY 25393 28391 0.031
3-WAY 25394 28393 0.059
3-WAY 25395 28395 0.076
4-WAY 25396 28397 0.031
4-WAY 25397 28399 0.059
4-WAY 25398 28401 0.076
5-WAY 25399 — 0.031
5-WAY 25400 — 1mm
6-WAY 25401 — 0.031
6-WAY 25402 — 1mm

Valve construction:

Valve wetted sur faces have a Kel-F (polychlorotrifluoroethylene) body and Teflon plug.
Port connection is 1/4-28 UNF.
All valve por ts are accessible when using syringes listed and Kloehn spring-loaded fittings
(recommended) or standard fittings (Upchurch #P200 fittings or equal).
Valve weep hole port connection is #6-40 UNF-2A. Fittings for this port are available in t wo materials;
PEEK (PT # 24528); and stainless steel 303 (PT # 24529). For use with 1/16 OD tubing.

5/13

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

© Norgren Kloehn, Inc. 2012

PDS-0004 REV. 6