Norgren Tube cutter User Manual

Littleton, CO USA Phone [phone] www.norgren.com

FIT-7-1

Tubing and
Accessories

Section 7

Inch Industrial Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FIT-7-2

Metric Industrial Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FIT-7-3

Inch D.O.T. Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .FIT-7-3

Accessories and Replacement Parts . . . . . . . . . . . . . . . . . . . .FIT-7-5

Maximum Minimum

Tubing Working Pressure Bend

OD ID OD ID

-40°F to 70°F (-40°C to 20°C)

Radius Part Number and Color

(inch) (inch) (mm) (mm) psig bar inch mm Natural Black Blue Green Red Yellow

1/8 0.093 225 15.5 0.38 10 PB 0051 100 PB 0751 100 PB 0551 100 PB 0251 100 PB 0151 100 PB 0351 100
5/32 0.106 4 2.7 275 19.0 0.50 13 PB 0052 100 PB 0752 100 PB 0552 100 PB 0252 100 PB 0152 100 PB 0352 100
3/16 0.138 225 15.5 0.63 16 PB 0053 100 PB 0753 100 PB 0553 100 PB 0253 100 PB 0153 100 PB 0353 100

1/4 0.180 250 17.2 0.88 22 PB 0054 100 PB 0754 100 PB 0554 100 PB 0254 100 PB 0154 100 PB 0354 100
5/16 0.232 8 5.9 220 15.2 1.25 32 PB 0055 100 PB 0755 100 PB 0555 100 PB 0255 100 PB 0155 100 PB 0355 100

3/8 0.275 220 15.2 1.50 38 PB 0056 100 PB 0756 100 PB 0556 100 PB 0256 100 PB 0156 100 PB 0356 100

1/2 0.375 200 13.8 2.00 51 PB 0057 100 PB 0757 100 PB 0557 100 PB 0257 100 PB 0157 100 PB 0357 100

Tubing Maximum Working Minimum

OD ID Pressure at 75°F Bend Part Number and Color

(mm) (mm) psig bar Radius Natural Black Trans Blue Trans Green Trans Red

1/8" .066 233 16.1 1/4" PW 0051 100 PW 0751 100 PW 0551 100 PW 0251 100 PW 0151 100

5/32" .094 176 12.1 3/8" PW 0052 100 PW 0752 100 PW 0552 100 PW 0252 100 PW 0152 100

1/4" .160 148 10.2 1/2" PW 0054 100 PW 0754 100 PW 0554 100 PW 0254 100 PW 0154 100

5/16" .197 155 10.7 3/4" PW 0055 100 PW 0755 100 PW 0555 100 PW 0255 100 PW 0155 100

FIT-7-2

Littleton, CO USA Phone [phone] www.norgren.com

Inch Industrial Tubing

● Recommended for use with Pneufit Push-In Fittings

● Manufactured from Nylon 11

● UL-94HB flame retardant rating

● Heat and light stabilized

● Shipped in 100 ft. coils (30m) packed in

polyethylene bags

Specifications

Fluids: Compressed air, nitrogen and inert gases
Material: Nylon 11
Temperature Rating: -60°F to 200°F (-5°C to 93°C)*
Vacuum Rating: To 28° Hg (711 mm Hg)
Diameter Tolerances: + 0.002"; -0.004"
Hardness: 78 Rockwell R

Notes

The working pressure for Nylon 11 tubing is calculated
using a 4 to 1 safety factor.
* To determine working pressures at other temperatures,
see chart. Tubing is supplied in 100 ft. (30.5m) coils,
packaged in poly bags. For other colors, lengths or
packaging, please consult factory.

Technical Information High Flow Inch Tubing

● Recommended for use with Pneufit Push-In Fittings

● Manufactured from Polyurethane

● Shipped 100' coils packed in Polyethylene bags

Specifications

Fluids: Compressed air
Material: 95 Durometer Polyurethane
Temperature Rating: -40°F to 165°F (-40°C to 73°C)
Vacuum Rating: To 28° Hg (711 mm Hg)
Diameter Tolerances: ± 0.005"

Technical Information Tube Types

Working Pressure at Elevated Temperature

100%

90%

80%

70%

60%

Pressure Retention

50%

40%

75°F

(24°C)

100°F
(38°C)

Temperature

125°F
(52°C)

150°F
(66°C)

Littleton, CO USA Phone [phone] www.norgren.com

FIT-7-3

Metric Industrial Tubing

● Recommended for use with Pneufit Push-In Fittings.

● Manufactured from Nylon 12

● Resistant to many chemicals

● Excellent pressure rating

● Black tubing provides reduced ultraviolet degradation

● Conforms to BS5409-1:1976 and DIN 73378

● Shipped in 25 meter (82 ft.)coils packed in polyethylene bags.

Specifications

Fluids: Compressed air, nitrogen and inert gases
Material

: Nylon 12
Maximum continuous working temperature:
80°C (175°F)

Technical Information for Metric Tubing

Tubing Maximum Working Pressure Minimum Bend

OD ID -40°C to 20°C (-40°F to 70°F) Radius Part Number and Color

(mm) (mm) bar psig mm inch Natural Black Blue Green Red

4 2.5 28.0 406 25 0.98 PA 0004 025 PA 0704 025 PA 0504 025 PA 0204 025 PA 0104 025
5 3.0 31.0 450 25 0.98 PA 0005 025 PA 0705 025 PA 0505 025 PA 0205 025 PA 0105 025
6 4.0 25.0 362 30 1.18 PA 0006 025 PA 0706 025 PA 0506 025 PA 0206 025 PA 0106 025

8 6.0 19.0 275 50 1.97 PA 0008 025 PA 0708 025 PA 0508 025 PA 0208 025 PA 0108 025
10 7.5 24.0 348 60 2.36 PA 0010 025 PA 0710 025 PA 0510 025 PA 0210 025 PA 0110 025
12 9.0 18.0 261 75 2.95 PA 0012 025 PA 0712 025 PA 0512 025 PA 0212 025 PA 0112 025
14 11.0 15.0 218 80 3.15 PA 0014 025 PA 0714 025 PA 0514 025 PA 0214 025 PA 0114 025

For other colors, lengths or packaging, please consult factory.

FIT-7-4

Littleton, CO USA Phone [phone] www.norgren.com

Accessories and Replacement Parts

Tube Cutter

● Makes clean, square cuts in Nylon tubing that are necessary for

leak free connections.

● Small size (3" long, 1" wide, 1" high) makes it easy to use and

convenient to carry.

● Spring actuation keeps it closed when not in use.

● Order part number M/3314.

● Replacement blades (5 pack) M/32009

Tube Markers

● PVC tube markers eliminate confusing fluid power

connections by providing easy to read identification.

● Permanent, hot stamped black characters on white

background are not affected by grease, oil, or lubricating
fluids.

● Markers snap on without tools before or after tube

terminations made. Can be removed without disconnecting
tubing.

● Non-adhesive interior of marker will not pinch, kink, or mar

tubing.

PV

LV

IN

F

CYL

F

OUT

OUT

Tube Marker Kits

Tube Size (O.D.)

Code 1/8" 5/32" & 4 mm 1/4" & 6 mm 3/8"

Alphanumeric Kit* 94 911 025 94 911 058 94 911 091 94 911 124

Descriptive Kit** 94 911 033 94 911 066 94 911 099 94 911 132

* Contains 50 each of all numbers (0-9) and letters (A-H, J, P, R, X, Y, and Z)
** Contains 50 each of CYL, PV, LV, IN, OUT, + and -.

Tube Mount - 2 Channel

● Save installation time - tube mounts provide

quick, secure mounting and exact spacing
between tubes.

● Tubing snaps into channels for clean,

organized circuits.

● Tube mounts are drilled for machine screw

mounting.

Mounting

Part Tube Screw

Number Size Size Color
94 910 004 5/32" & 4 mm #4 Black
94 910 006 1/4" & 6 mm #4 Black
94 910 008 5/16" & 8 mm #6 Black
94 910 010 3/8" #6 Black
94 910 012 1/2" #6 Black
94 910 015 5/8" #10 Black

Littleton, CO USA Phone [phone] www.norgren.com

FIT-7-5

Accessories and Replacement Parts

Tube Mount - 10 Channel

● Full 10 channel section (4" long, 5/8" wide and 3/8" high) is

easily cut for 1 to 10 channels.

● Each channel is countersunk for No. 4 machine screws.

● Tubing snaps into channels for clean, organized circuits.

● Pressure sensitive Urethane foam adhesive backing for quick

mounting (except 3/8" model).

● Slotted design allows mounting on curved or angular surfaces.

Color of mounts match machine or tubing.

Mounting

Part Tube Screw

Number Size Size Color

94 902 002 5/32" & 4 mm #4 Black
94 902 003 3/16" #4 Black
94 901 004 1/4" & 6 mm #4 White
94 902 004 1/4" & 6 mm #4 Black
94 903 004 1/4" & 6 mm #4 Blue

94 904 004 1/4" & 6 mm #4 Green

94 905 004 1/4" & 6 mm #4 Red
94 906 004 1/4" & 6 mm #4 Yellow
94 908 004 1/4" & 6 mm #4 Grey

94 902 006 3/8" & 10 mm - Black

Spiral Flex Wrap

● Natural color Polyethylene spiral flex wrap
twists easily over bundles of various sized

tubing or insulated electric wire.

● Nominal 1/2" O.D. accommodates bundles
from 3/8" to 4" in diameter. Can be wrapped

for greater flexibility or butted for rigidity.

● Tubing or wire can be led out at any point.

● Provided in 50’ (15 meter) coils.

● Order part number 94 960 001.

Replacement Parts

48 026 101 Replacement thermoplastic

sealing washer for use with
10-32 and M5 threads.
Sold individually.

48 031 101 Replacement viton bonded

sealing washer for use with
10-32 and M5 threads. Sold in
package of 10.

Release Tool

Used to disconnect tubing from all Norgren
fittings. Helps in situations where fitting is
difficult to reach.

Part Number: 54 0001 00