Norgren R07 Datasheet

See Section ALE-24 for Accessories

Littleton, CO USA Phone [phone] www.norgren.com

R07

● Compact design

● Full flow gauge ports

● Low torque, non-rising adjusting knob

● Snap action knob locks pressure setting when

pushed in

● Standard relieving models allow reduction of outlet

pressure even when the system is dead-ended

● Can be disassembled without the use of tools or

removal from the air line

Miniature Series 07 General Purpose

Regulator 1/8" and 1/4" Port Sizes

ALE-4-2

ISO Symbols

Relieving Non relieving

Alternative Models

Port Size Substitute
1/8" 1
1/4" 2

Threads Substitute
PTF A
ISO Rc taper B
ISO G parallel G

Port Size Model Number Flow† scfm (dm3/s) Weight lbs (kg)
1/8" R07-100-RGKA 14 (6.5) 0.31 (0.19)
1/4" R07-200-RGKA 15 (7) 0.31 (0.19)

Ordering Information. Models listed include PTF threads, relieving diaphragm, 5 to 100 psig (0.3 to 7 bar) outlet pressure adjustment

range*, with gauge.

Outlet Pressure Adjustment Ranges* Substitute
1 to 10 psig (0.1 to 0.7 bar) A
5 to 50 psig (0.3 to 3.5 bar) E
5 to 100 psig (0.3 to 7 bar) K
5 to 125 psig (0.3 to 8.6 bar) L

Option Substitute
Standard 0
Low flow seat 2

Gauges Substitute
With G
Without N

Diaphragm Substitute
Relieving R
Non relieving N

Option Substitute
Not applicable 0

* Outlet pressure can be adjusted to pressures in excess of, and less

than, those specified. Do not use these units to control pressures
outside of the specified ranges.

† Approximate flow at 100 psig (7 bar) inlet pressure, 90 psig (6.3 bar) set pressure and a droop of 14.5 psig (1 bar) from set.

-

★★★ ★★

★

-

0★R 7

R07 General Purpose Regulators

Littleton, CO USA Phone [phone] www.norgren.com

ALE-4-3

All Dimensions in Inches (mm)

Technical Data

Fluid: Compressed air
Maximum pressure: 300 psig (20 bar)
Operating temperature: -34° to 150°F (-35° to 65°C) *

* Air supply must be dry enough to avoid ice formation at temperatures below 2°C (35°F).

Typical flow at 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set pressure and

a droop of 15 psig (1 bar) from set:
1/8" ports: 14 scfm (6.5 dm3/s)
1/4" ports: 15 scfm (7 dm3/s)

Gauge ports:

1/8" PTF with PTF main ports
1/8" ISO Rc with ISO Rc main ports
1/8" ISO Rc with ISO G main ports

Materials:

Body: Zinc
Bonnet: Acetal
Valve: Brass/nitrile
Valve seat: Acetal
Elastomers: Nitrile

PORT SIZE: 1/4

"

INLET PRESSURE: 150 psig (10 bar g)
RANGE: 5 to 100 psig (0.3 to 7 bar)

FLOW CHARACTERISTICS

024 6810dm

3

/s

AIR FLOW

0 4 8 12 16 20 24 scfm

OUTLET PRESSURE

8

6

4

2

0

bar g

100

80

60

40

20

0

psig

Typical Performance Characteristics

2.13 (54)

1.50 (38)

1.63 (41)

1.57 (40)

0.95 (24)

2.52 (64)

2.91 (75)

1.1 (28)

0.73
(19)

0.91
(23)

Panel mounting hole diameter 1.19" (30 mm)
Maximum panel thickness 0.25" (6 mm)

Service Kits

Item Type Part number
Service kit

Relieving 3407-02
Non relieving 3407-01

Service kit includes slip ring, diaphragm, standard valve seat with
o-ring, valve, valve spring.