Norgren PRA-882000-M User Manual

Cylinders and mountings conform to ISO 15552

Complete functional unit with LED display Central electrical connector, polarity-safe Integrated 5/2 or 5/3 valve Additional output cylinder ports (2 & 4) Integrated ﬂow regulator for speed control Integrated reed or solid state switches Protection class IP67, suitable for food and

beverage sector Energy efﬁcient

Technical features

Medium:

Compressed air, ﬁltered, lubricated or non-lubricated Particles size: Class 7, ISO 8573 – 1 (dated 2001) Humidity and water content: Air supply must be dry. Corresponding of the application and working conditions the air must be dry enough to avoid condensate. The pressure dewpoint must be minimum 15° under the application and working conditions. Oil: Class 4, ISO 8573 – 1 (dated 2001)

Standard: Based on ISO 15552

(length , mounting pitch and thread dimensions according to ISO 15552. Some outside dimensions different to ISO 15552)

Operation: Double acting, magnetic piston, adjustable cushioning Operating pressure: 29 to 116 psig (2 to 8 bar) Port size: G1/8, G1/4, G3/8 Cylinder diameters: 32, 40, 50, 63, 80, 100 mm Standard strokes: See below Non-standard strokes: 25 to1000 mm

Operating temperature: 23° to 122°F (-5°C to 50°C) max. Supply voltage: 24 V d.c. Power consumption: 2 W max Electrical connection: DIN EN175301-803, form C Manual override: Push and lock Rating: 100% continuous duty Protection class: IP 67

Hygienic standard:

Conforms to EN1672-2

PRA/882000/M

IVAC Cleanline cylinder

double acting, magnetic piston

Ø 32 ... 100 mm

Materials: Proﬁle barrel: anodised aluminum, End covers: pressure diecast anodised aluminum Piston rod: stainless steel, see page 2 Piston rod seals: polyurethane Piston seals: polyurethane O-rings: nitrile rubber

Technical data

Cylinder Ø (mm) 32 40 50 63 80 100

Air ports

Piston rod Ø (mm)

Piston rod thread

Cushion length inch (mm)

Theoretical thrusts at 87 psig (6 bar) extended lbf. (N)

Theoretical thrusts at 87 psig (6 bar) retracted lbf. (N)

Air consumption at 87 psig (6 bar) extended cu ft/in (l/cm)

Air consumption at 87 psig (6 bar) retracted cu ft/in (l/cm)

G 1/8 G 1/8 G 1/8 G 1/4 G 1/4 G 3/8

12 16 20 20 25 25

M10 x 1.25 M12 x 1.25 M16 x 1.5 M16 x 1.5 M20 x 1.5 M20 x 1.5

0.74" (19) 0.86" (22) 0.94" (24) 0.94" (24) 1.06" (27) 1.34" (34)

108 (482) 170 (754) 265 (1178) 420 (1870) 678 (3016) 1058 (4710)

93 (414) 142 (633) 223 (990) 378 (1680) 612 (2722) 993 (4416)

0.005 (0.056) 0.008 (0.088) 0.012 (0.137) 0.019 (0.218) 0.031 (0.350) 0.059 (0.550)

0.004 (0.050) 0.007 (0.076) 0.010 (0.117) 0.018 (0.198) 0.029 (0.324) 0.046 (0.514)

Standard strokes

Cylinder Ø (mm)

32 • • • • • • • • • • •

40 • • • • • • • • • • •

50 • • • • • • • • • • •

63 • • • • • • • • • • •

80 • • • • • • • • • • •

100 • • • • • • • • • • •

4/13

Strokes (mm) 25 50 80 100 125 160 200 250 320 400 500

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

N/us 1.5.260.01

PRA/882000/M

V-52-EM-F-spec1

V-52-EMH-F-spec1

V-52-EM-F-spec2

V-52-EMH-F-spec2

V-52B-EM_spec1

V-52B-EMH_spec1

V-53A-EMH-spec1

513

V-53A-EM-spec1

V-53E-EMH-spec1

Cylinder variants

Symbol R S C D E V Model with

magnetic piston

• • • • • • PRA/882000/MI Standard cylinder 6

• • • • • • PRA/882000/W2 Cylinder with special wiper/

• • • • • • PRA/882000/MU Cylinder with extended

For the cylinder models style C, D, E, S and V see options selector

Description Dimensions

Page

seal (suitable for appl. with

cement, plaster (stucco), arizona sand, hoar-frost or ice)

piston rod

Option selector

Piston rod material Substitute

Stainless steel (martensitic); Standard wiper seal

Stainless steel (austenitic); Standard wiper seal

Hard chromium plated; Standard wiper seal

Stainless steel (austenitic); hard chromium plated; Standard wiper seal

Stainless steel (austenitic); Smooth wiper seal (orange)

Stainless steel (austenitic); hard chromium plated; Smooth wiper seal (orange)

Cylinder Ø (mm) Substitute

032, 040, 050, 063, 080, 100

Variants (magnetic piston) Substitute

Standard

Piston rod bellow

Special wiper seal

Extended piston rod P**/882***/MU/****/***

Extension (mm)

P˙A/882˙˙˙/˙˙˙/M˙/˙˙˙˙

Strokes (mm)

1000 max.

Switch variants Substitute

Without

Adjustable Reed switches

*2)

Adjustable solid state switches

Valve function *1) Substitute

5/2 way solenoid operated, spring return, cylinder retracted

5/2 way solenoid operated, spring return, cylinder extended

5/2 way solenoid operated, solenoid return

5/3 way solenoid operated, solenoid return, all ports blocked (APB)

4/13

5/3 way solenoid operated, solenoid return, central open exhaust (COE)

*1)

Version with pilot operated valves on request.

*2)

For use with 32 mm bore - consult factory.

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

513

N/us 1.5.260.02

PRA/882000/M

Reduced Installation Time & Cost

To connect the IVAC simply run a single supply line to provide an air supply to each unit. There is no mounting of valve islands to the machine framework or inside a cabinet and there is no pipework to run around the machine to connect each valve to each actuator.

5 6

One of the advantages of the IVAC cylinders is to use the output cylinder ports (2 & 4) from the main valve to operate an additional cylinder.

Fieldbus cable

IO module

Y cable

Plug with molded cable, 90°

Plug with molded cable, straight

Air supply

Electrical connection

Output ports (2&4)

4/13

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

N/us 1.5.260.03

PRA/882000/M

Mountings

Position Style Standard Corrosion protected Stainless steel

1 B, G Clear anodised aluminum Clear anodised aluminum. Screws: A2 X 5 Cr Ni 18 10 (1.4301; AISI 304). Screws: A2

2 C Galvanized steel (ø 32 ... 63 mm)

Painted steel (ø 80 & 100 mm)

3 R Diecast aluminum Black corrosion protected diecast aluminum. Certified

4 UR Galvanized aluminum

Inner ring: steel Outer ring: brass

5 D Diecast aluminum

Bolt: galvanized steel (martensitic) Circlip: galvanized steel

6 SW Diecast aluminium Black corrosion protected diecast aluminum

7 US Galvanized aluminum. Inner ring: steel

Outer ring: brass

8 D2 Painted cast iron. Bolt: stainless steel (martensitic)

Circlip: galvanized steel

9 FH Cast iron — —

10 A Galvanized steel — —

11 Screw — — X 10 Cr Ni S 18 9 (1.4305, AISI 303)

12 S Clear anodised aluminum

Bearing: brass

15 F Galvanized steel

Bolt: galvanized steel Circlip: Galvanized steel

16 SS Painted cast iron — —

17 UF Galvanized steel. Inner ring: steel

Outer ring: brass

18 AK Galvanized steel — —

— X 5 Cr Ni 18 10 (1.4301; AISI 304). Screws: A2

for the food industry. Screws: A2

Black corrosion protected diecast aluminum Certified for the food industry Inner ring: stainless Steel (austenitic) Outer ring: nickel plated hardened steel

Black corrosion protected diecast aluminum Certified for the food industry Bolt: X 10 Cr Ni S 18 9 (1.4305, AISI 303) Circlip: Stainless steel (martensitic). Screws: A2

Certified for the food industry

— —

Nickel plated steel Circlip: X 10 Cr Ni S 18 9 (1.4305, AISI 303) Bolt: X 10 Cr Ni S 18 9 (1.4305, AISI 303)

Nickel plated steel. Inner ring: stainless steel (austenitic) Outer ring: nickel plated hardened steel.

X 5 Cr Ni 18 10 (1.4301; AISI 304). Screws: A2 Bolt: X 10 Cr Ni S 18 9 (1.4305; AISI 303)

X 6 Cr Ni 18 9 (1.4308; AISI 304)

X 10 Cr Ni S 18 9 (1.4305; AISI 303) Bolt: X 10 Cr Ni S 18 9 (1.4305; AISI 303) Eyebolt: X 10 Cr Ni S 18 9 (1.4305; AISI 303)

—

4/13

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

N/us 1.5.260.04

Mountings and service kits

Model ØA

B, G

PRA/882000/M

Page 6

32 QM/8032/35 QM/8025/38 QA/8032/22 QA/8032/21 QA/8032/23 QA/8032/42 QM/8025/25 QA/8032/34 QA/8032/27

40 QM/8032/35 QM/8040/38 QA/8040/22 QA/8040/21 QA/8040/23 QA/8040/42 QM/8040/25 QA/8040/34 QA/8040/27

50 QM/8050/35 QM/8050/38 QA/8050/22 QA/8050/21 QA/8050/23 QA/8050/42 QM/8050/25 QA/8050/34 QA/8050/27

63 QM/8050/35 QM/8050/38 QA/8063/22 QA/8063/21 QA/8063/23 QA/8063/42 QM/8050/25 QA/8063/34 QA/8063/27

80 QM/8080/35 QM/8080/38 QA/8080/22 QA/8080/21 QA/8080/23 QA/8080/42 QM/8080/25 QA/8080/34 QA/8080/27

100 QM/8080/35 QM/8080/38 QA/8100/22 QA/8100/21 QA/8100/23 QA/8100/42 QM/8080/25 QA/8100/34 QA/8100/27

Corrosion protected mounts

Stainless steel

Model

Page 6

PVQA/8032/22 PVQA/8032/23 PVQM/8025/25 PVQA/8032/33

PVQA/8040/22 PVQA/8040/23 PVQM/8040/25 PVQA/8040/33

PVQA/8050/22 PVQA/8050/23 PVQM/8050/25 PVQA/8040/33

PVQA/8063/22 PVQA/8063/23 PVQM/8050/25 PVQA/8063/33

PVQA/8080/22 PVQA/8080/23 PVQM/8080/25 PVQA/8080/33

PVQA/8100/22 PVQA/8100/23 PVQM/8080/25 PVQA/8100/33

KQA/8032/22 KQA/8032/21 KQA/8032/23 KQM/55433/25

KQA/8040/22 KQA/8040/21 KQA/8040/23 KQM/55441/25

KQA/8050/22 KQA/8050/21 KQA/8050/23 KQM/55451/25

KQA/8063/22 KQA/8063/21 KQA/8063/23 KQM/55451/25

KQA/8080/22 KQA/8080/21 KQA/8080/23 KQA/8080/25

KQA/8100/22 KQA/8100/21 KQA/8100/23 KQA/8080/25

Page 6

Page 7

Cover screws

Page 7

Page 8

Service kit

Page 8

32 QA/8032/41 M/P19931 M/P19493 QM/8025/32 QA/8032/33 M/P40310 PRQA/882032/00

40 QA/8040/41 M/P19932 M/P19494 QM/8040/32 QA/8040/33 M/P40311 PRQA/882040/00

50 QA/8040/41 M/P19933 M/P19495 QM/8050/32 QA/8050/33 M/P40312 PRQA/882050/00

63 QA/8063/41 M/P19934 M/P19496 QM/8050/32 QA/8063/33 M/P40313 PRQA/882063/00

80 QA/8063/41 M/P19935 M/P19497 QM/8080/32 QA/8080/33 M/P40314 PRQA/882080/00

100 QA/8100/41 M/P19936 M/P19498 QM/8080/32 QA/8100/33 M/P40315 PRQA/882100/00

Stainless steel

Page 9

Page 8

M/P72288 PVQA/882032/88

M/P72289 PVQA/882032/88

M/P72290 PVQA/882050/88

M/P72291 PVQA/882050/88

M/P72292 PVQA/882080/88

M/P72293 PVQA/882080/88

Page 9

4/13

Our policy is one of continued research and development. We therefore reserve the right to amend,

without notice, the specifications given in this document.

N/us 1.5.260.05

+ 9 hidden pages

Norgren PRA-882000-M User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual